How to recovery shipped bootloader ?

How to recovery shipped bootloader ?

[b8944028]

HI,

  I have a omap5912. I broke the shipped bootloader on my 5912. How to recover
it? I have read "omap5912osk_2.6.pdf"(How to Build Linux for the OMAP5912
Processor) but this document do not have solution about  my problem. 

Thank you

Re: How to recovery shipped bootloader ?

[Nirav Jani]

http://omap.spectrumdigital.com/osk5912/factoryconfig
check this out, will solve your problem, I was having the similar one.

Nirav Jani
MoTech Software Pvt. Ltd.,
Mumbai, India

On 12/7/05, b8944028 <b8944028@stmail.cgu.edu.tw> wrote:
>
> HI,
>
> I have a omap5912. I broke the shipped bootloader on my 5912. How to
> recover
> it? I have read "omap5912osk_2.6.pdf"(How to Build Linux for the OMAP5912
> Processor) but this document do not have solution about  my problem.
>
> Thank you
> _______________________________________________
> Linux-omap-open-source mailing list
> Linux-omap-open-source@linux.omap.com
> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>

Re: How to recovery shipped bootloader ?

[Matthew Percival]

G'Day,

> http://omap.spectrumdigital.com/osk5912/factoryconfig
> check this out, will solve your problem, I was having the similar one.

	In addition to that, especially if you do not use CCS or have a J-Tag
emulator, there are two programs to automatically reflash u-boot for you
using USB.  You can find more out about them here:
http://tree.celinuxforum.org/CelfPubWiki/FlashRecoveryUtility

	-- Matthew

How to recovery shipped bootloader ?

[Nirav Jani]

The problem with fru is to find out a male to male usb cable, if you can, it
is good one,
 nirav


 On 12/8/05, Matthew Percival <matthew@capgo.com> wrote:
>
> G'Day,
>
> > http://omap.spectrumdigital.com/osk5912/factoryconfig
> > check this out, will solve your problem, I was having the similar one.
>
>        In addition to that, especially if you do not use CCS or have a
> J-Tag
> emulator, there are two programs to automatically reflash u-boot for you
> using USB.  You can find more out about them here:
> http://tree.celinuxforum.org/CelfPubWiki/FlashRecoveryUtility
>
>        -- Matthew
>
> _______________________________________________
> Linux-omap-open-source mailing list
> Linux-omap-open-source@linux.omap.com
> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>

RE: How to recovery shipped bootloader ?

[Hunter, Jon]

Hi Nirav,
 
> 
> The problem with fru is to find out a male to male usb cable, 
> if you can, it is good one,  nirav
> 

You can find such cables, just google for "USB Type A male-male cable".
For example:
http://www.cwol.com/usb/92701.htm

Or what I have is a usb gender changer. For example:
http://www.lg-internet.com/catalog/product_info.php/cPath/91_66/products
_id/263

I have not bought anything from the above companies but there are
solutions available.

Regards,
Jon