From mboxrd@z Thu Jan 1 00:00:00 1970 From: Komal Shah Subject: Re: Problem with flashing and/or starting UBoot with 2420 Date: Fri, 23 Dec 2005 03:22:35 -0800 (PST) Message-ID: <20051223112235.86861.qmail@web32905.mail.mud.yahoo.com> References: <3d3153f60512230139v57b3a30dh2346e44ad2b17da8@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <3d3153f60512230139v57b3a30dh2346e44ad2b17da8@mail.gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: Ola Helm , linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org --- Ola Helm wrote: > Hi all, > > My problem is following one: > > I flashed the newest H4 UBoot available to ou board and after restart > I get > following message in Hyperterminal: > > U-Boot 1.1.3 (Sep 6 2005 - 14:24:25) > > U-Boot code: 80E80000 -> 80E9F0E8 BSS: -> 80EA3F2C > OMAP2420-GP revision 3, PRCM II > TI H4 SDP Base Board + Menelaus Daughter Board + mDDR > RAM Configuration: > Bank #0: 80000000 32 MB > Bank #1: 82000000 32 MB > ## Unknown FLASH on Bank 0 - Size = 0x00000000 = 0 MB > ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB > Flash: 0 kB > NAND: >>From this I can make out that, you are trying to boot from NAND instead of NOR ...!!! Switch positions on processor daughter card is wrong. Does u-boot compiled for NAND or NOR? Please undefine #CONFIG_NAND_BOOT. Please see this: http://linux.omap.com/pipermail/linux-omap-open-source/2005-December/005994.html ---Komal Shah http://komalshah.blogspot.com/ __________________________________ Yahoo! for Good - Make a difference this year. http://brand.yahoo.com/cybergivingweek2005/