Re: Ethernet issue in most recent git?

[Tony Lindgren <tony@atomide.com>]

Hi,

* Dirk Behme <dirk.behme@de.bosch.com> [060119 09:55]:
> Hi,
> 
> has anybody else problems with ethernet with 2.6.16-rc1-omap1 on OSK?
> 
> # mount -t nfs -o nolock 192.0.0.1:/home/omap_linux/nfs /mnt/nfs
> NETDEV WATCHDOG: eth0: transmit timed out
> mount: RPC: Unable to receive; errno = No route to host
> mount: nfsmount failed: Bad file descriptor
> mount: Mounting 192.0.0.1:/home/omap_linux/nfs on /mnt/nfs failed: 
> Invalid argument
> # ifconfig
> eth0      Link encap:Ethernet  HWaddr 00:0E:99:02:02:42
>           inet addr:192.0.0.2  Bcast:192.0.0.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:20 errors:1 dropped:0 overruns:0 carrier:1
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 B)  TX bytes:840 (840.0 B)
>           Interrupt:160 Base address:0x1300 DMA chan:ff
> # cat /proc/interrupts
>            CPU0
> ...
> 160:          1   eth0
> ...
> Err:          0
> 
> Telnet and ping don't work as well. I imagine that I doesn't change any 
> configuration, only kernel update form git. UBoots tftpboot works quite 
> well.

Same problem here. I'd assume it's the recent "IRQ type flags" patch
that does not work properly for omap gpio interrupts.

Tony