From: Tony Lindgren <tony@atomide.com>
To: Hiroki Kaminaga <kaminaga@sm.sony.co.jp>
Cc: linux-omap-open-source@linux.omap.com
Subject: Re: [PATCH][RFC] update flash timing on OMAP5912OSK
Date: Mon, 20 Feb 2006 15:04:50 -0800 [thread overview]
Message-ID: <20060220230450.GH30248@atomide.com> (raw)
In-Reply-To: <20060220.132145.74756047.kaminaga@sm.sony.co.jp>
* Hiroki Kaminaga <kaminaga@sm.sony.co.jp> [060219 20:29]:
> Hi,
>
> In linux-2.6.15-omap1 patch, in arch/arm/mach-omap1/board-osk.c,
> EMIFS_CS3_VAL is set to 0x30003361.
>
> This was introduced to fix flash timing error.
> http://linux.omap.com/pipermail/linux-omap-open-source/2005-July/004717.html
>
> On the other hand, in SectionE:Errata in EMIFS timing at:
> http://omap.spectrumdigital.com/osk5912/osk5912_faq.html
> EMIFS_CS3_VAL was set to 0x88013141, fixing write/read rate.
>
> Reading from
> http://focus.ti.com/lit/ug/spru742/spru742.pdf
> 3.6 EMIFS Registers,
>
> 0x30003361 will set read mode from "page mode, 4 word/page" to
> "asynchronous read", and read from flash slowed down.
>
> I tested with new value 0x88013141, and works good so far.
>
> Here is a patch against 2.6.15-omap1 patch.
Thanks, pushing today.
Tony
prev parent reply other threads:[~2006-02-20 23:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-20 4:21 [PATCH][RFC] update flash timing on OMAP5912OSK Hiroki Kaminaga
2006-02-20 23:04 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060220230450.GH30248@atomide.com \
--to=tony@atomide.com \
--cc=kaminaga@sm.sony.co.jp \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox