From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: Bad data CRC problem after i restart the OSK 5912 Date: Fri, 3 Mar 2006 11:04:33 -0800 Message-ID: <20060303190432.GH4398@atomide.com> References: <26d3a31c0603022252i50c46104qe2aad374479156b0@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <26d3a31c0603022252i50c46104qe2aad374479156b0@mail.gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: prafulla chandra vejendla Cc: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org * prafulla chandra vejendla [060302 22:53]: > Hi all, > i am using u-boot 1.1.1 with linux2.6.11.3 i made an uimage.cc of 1143783 > bytes (nearly 1.1MB) with out any error by following new-bie guide for my > osk 5912 board i downloaded that through the hyperterminal by using the > kermit protocol . once i restarted the board or if i use > bootm 0x100000 it is giving verifying checksum....... Bad Data CRC. and > remained in the uboot prompt only. > why i am getting this error .where will be the problem.whether that kernal > and u-boot combination that i have choosen is correct or not. > please clear my doubt Probably bad memory timings set in the bootloader. Tony