From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan McDowell Subject: Re: [PATCH] Fix USB host on 1510/5910? Date: Tue, 28 Mar 2006 20:05:19 +0100 Message-ID: <20060328190519.GS26949@earth.li> References: <20060328164403.GL26949@earth.li> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20060328164403.GL26949@earth.li> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org On Tue, Mar 28, 2006 at 05:44:03PM +0100, Jonathan McDowell wrote: > I'm not quite sure if this is necessary or not. I've found I need it to > get USB working correctly on the Amstrad E3, which is an OMAP5910. From > my reading of ohci-omap.c usb_dc_ck is requested for the 1510 as well, > and if it can't be obtained an error is returned. > > Does anyone have USB working correctly on a 1510/5910 with latest git > without something like the below? Scratch that for the moment. I'm now getting: ohci ohci: Unlink after no-IRQ? Controller is probably using the wrong IRQ. even with this patch, whereas it worked fine for 2.6.15-omap1. I'd still like to know if anyone's having success with a 1510/5910 and latest git though, as I've had someone else tell me they were seeing similar problems on a platform that wasn't the E3 (unfortunately it was on IRC and I don't have their details. :( ). J. -- [ noodles is almost a national pastime in japan ] [ http://www.blackcatnetworks.co.uk/ - IPv6 enabled ADSL/dialup/colo ]