Kernel 2.6.16 hangs after start booting with U-Boot 1.1.2

Kernel 2.6.16 hangs after start booting with U-Boot 1.1.2

[Martin Margraf]

hi,

my problem is that after updating u-boot from 1.1.1 to 1.1.2 and after patching /arch/arm/boot/compressed/makefilfe and head-omap.S
the kernel is hanging up at start. i use the latest kernel (2.6.16.18) and patched it with the 2.6.16-omap1 patch.

the second problem is in hyperterminal or minicom. 
i try to setenv bootargs... but at the end of line there is no jump to the next line (if i press enter then there is a new line) so 
i cant set all bootargs in one row.
does anybody else has this problem?

im going insane :)

regards

martin 
______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193

Re: Kernel 2.6.16 hangs after start booting with U-Boot 1.1.2

[Dirk Behme]

Martin Margraf wrote:
> my problem is that after updating u-boot from 1.1.1 to 1.1.2 and after patching /arch/arm/boot/compressed/makefilfe and head-omap.S
> the kernel is hanging up at start. i use the latest kernel (2.6.16.18) and patched it with the 2.6.16-omap1 patch.

You don't tell us which board you use, which patches you 
applied to makefile and head-omap.S and where kernel hangs.

Try to enable

Kernel hacking -> Kernel debugging -> Kernel low-level 
debugging functions

for debugging.

Often made mistake are wrong parameters passed from u-boot 
to kernel (e.g. board ID) after u-boot update.

Why do you update to u-boot 1.1.2 and not latest one (1.1.4)?

Cheers

Dirk

Re: Kernel 2.6.16 hangs after start booting with U-Boot 1.1.2

[Tony Lindgren]

* Dirk Behme <dirk.behme@googlemail.com> [060524 07:44]:
> Martin Margraf wrote:
> >my problem is that after updating u-boot from 1.1.1 to 1.1.2 and after 
> >patching /arch/arm/boot/compressed/makefilfe and head-omap.S
> >the kernel is hanging up at start. i use the latest kernel (2.6.16.18) and 
> >patched it with the 2.6.16-omap1 patch.
> 
> You don't tell us which board you use, which patches you 
> applied to makefile and head-omap.S and where kernel hangs.
> 
> Try to enable
> 
> Kernel hacking -> Kernel debugging -> Kernel low-level 
> debugging functions
> 
> for debugging.
> 
> Often made mistake are wrong parameters passed from u-boot 
> to kernel (e.g. board ID) after u-boot update.
> 
> Why do you update to u-boot 1.1.2 and not latest one (1.1.4)?

Is this perhaps the memory timing issue also?

Tony