From: Jonathan McDowell <noodles@earth.li>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 1/2] FB: OMAP: Add LCD support for Amstrad Delta
Date: Sat, 27 May 2006 16:04:25 +0100 [thread overview]
Message-ID: <20060527150425.GA3864@earth.li> (raw)
The patch below adds support for the 12bit 480x320 DSTN panel used in
the Amstrad Delta (E3) videophone. It just adds support to the
drivers/video/omap/ tree; my next patch will add the appropriate
arch/arm/ configuration to make the Delta use the driver.
Patch is against current linux-omap git.
Signed-Off-By: Jonathan McDowell <noodles@earth.li>
-----
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 725ea29..e2ad039 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -14,6 +14,7 @@ objs-$(CONFIG_ARCH_OMAP2)$(CONFIG_FB_OMA
objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
+objs-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
objs-y$(CONFIG_MACH_OMAP_H4) += lcd_h4.o
objs-y$(CONFIG_MACH_OMAP_H3) += lcd_h3.o
objs-y$(CONFIG_MACH_OMAP_H2) += lcd_h2.o
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index a86cd73..d401d8a 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -844,6 +844,8 @@ static int omap_lcdc_init(struct omapfb_
rate = clk_get_rate(tc_ck);
clk_put(tc_ck);
+ if (machine_is_ams_delta())
+ rate /= 4;
if (machine_is_omap_h3())
rate /= 3;
r = clk_set_rate(omap_lcdc.lcd_ck, rate);
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -0,0 +1,157 @@
+/*
+ * File: drivers/video/omap/lcd_ams_delta.c
+ *
+ * Based on drivers/video/omap/lcd_inn1510.c
+ *
+ * LCD panel support for the Amstrad E3 (Delta) videophone.
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+
+#include <asm/arch/board-ams-delta.h>
+#include <asm/arch/omap16xx.h>
+#include <asm/arch/omapfb.h>
+
+/* #define OMAPFB_DBG 1 */
+
+#include "debug.h"
+
+#define AMS_DELTA_DEFAULT_CONTRAST 112
+
+static int ams_delta_panel_init(struct omapfb_device *fbdev)
+{
+ DBGENTER(1);
+ DBGLEAVE(1);
+ return 0;
+}
+
+static void ams_delta_panel_cleanup(void)
+{
+ DBGENTER(1);
+ DBGLEAVE(1);
+}
+
+static int ams_delta_panel_enable(void)
+{
+ DBGENTER(1);
+
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP,
+ AMS_DELTA_LATCH2_LCD_NDISP);
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN,
+ AMS_DELTA_LATCH2_LCD_VBLEN);
+
+ omap_writeb(1, OMAP16XX_PWL_CLK_ENABLE);
+ omap_writeb(AMS_DELTA_DEFAULT_CONTRAST, OMAP16XX_PWL_ENABLE);
+
+ DBGLEAVE(1);
+ return 0;
+}
+
+static void ams_delta_panel_disable(void)
+{
+ DBGENTER(1);
+
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN, 0);
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP, 0);
+
+ DBGLEAVE(1);
+}
+
+static unsigned long ams_delta_panel_get_caps(void)
+{
+ return 0;
+}
+
+static struct lcd_panel ams_delta_panel = {
+ .name = "ams-delta",
+ .config = 0,
+
+ .bpp = 12,
+ .data_lines = 16,
+ .x_res = 480,
+ .y_res = 320,
+ .pixel_clock = 4687,
+ .hsw = 3,
+ .hfp = 1,
+ .hbp = 1,
+ .vsw = 1,
+ .vfp = 0,
+ .vbp = 0,
+ .pcd = 0,
+ .acb = 37,
+
+ .init = ams_delta_panel_init,
+ .cleanup = ams_delta_panel_cleanup,
+ .enable = ams_delta_panel_enable,
+ .disable = ams_delta_panel_disable,
+ .get_caps = ams_delta_panel_get_caps,
+};
+
+static int ams_delta_panel_probe(struct platform_device *pdev)
+{
+ DBGENTER(1);
+ omapfb_register_panel(&ams_delta_panel);
+ return 0;
+}
+
+static int ams_delta_panel_remove(struct platform_device *pdev)
+{
+ DBGENTER(1);
+ return 0;
+}
+
+static int ams_delta_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ DBGENTER(1);
+ return 0;
+}
+
+static int ams_delta_panel_resume(struct platform_device *pdev)
+{
+ DBGENTER(1);
+ return 0;
+}
+
+struct platform_driver ams_delta_panel_driver = {
+ .probe = ams_delta_panel_probe,
+ .remove = ams_delta_panel_remove,
+ .suspend = ams_delta_panel_suspend,
+ .resume = ams_delta_panel_resume,
+ .driver = {
+ .name = "lcd_ams_delta",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int ams_delta_panel_drv_init(void)
+{
+ return platform_driver_register(&ams_delta_panel_driver);
+}
+
+static void ams_delta_panel_drv_cleanup(void)
+{
+ platform_driver_unregister(&ams_delta_panel_driver);
+}
+
+module_init(ams_delta_panel_drv_init);
+module_exit(ams_delta_panel_drv_cleanup);
-----
J.
--
jid: noodles@jabber.earth.li
noodles is said to have been introduced to
europe by marco polo after
he returned from china
next reply other threads:[~2006-05-27 15:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-27 15:04 Jonathan McDowell [this message]
2006-05-27 15:06 ` [PATCH 2/2] ARM: OMAP: Add LCD support for Amstrad Delta Jonathan McDowell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060527150425.GA3864@earth.li \
--to=noodles@earth.li \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox