From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan McDowell Subject: Re: USB on OMAP 1510 Innovator Date: Tue, 30 May 2006 10:04:48 +0100 Message-ID: <20060530090448.GA14634@earth.li> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org On Mon, May 29, 2006 at 03:14:24PM +0530, James Selvam wrote: > I am trying to use a USB peripheral with USB 2 host on the OMAP 1510 > Innovator. But I am unable to see the device being registered (or > recognised). > > -> The USB peripheral device be registered in the first place, when system > boots? > -> Has anyone successfully used the USB (2) Host with Innovator 1510? The 1510 only has USB 1 (though a USB 2 peripheral should work, just at a slower speed). What kernel version are you using? There's a patch that went into 2.6.16-omap2 that I believe is required for USB to work on the 1510 (it certainly is for the 5910). You should see some indication in the kernel boot messages about whether the USB is successfully working or not. > -> Does the patch submitted by Hiroshi DOYU on this forum on May 8, > necessarily be applied? No. J. -- /-\ | Sorry for the inconvenience. |@/ Debian GNU/Linux Developer | \- |