From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com Subject: Re: Undefined usb_disconnect Date: Tue, 4 Jul 2006 01:20:38 -0700 Message-ID: <20060704082029.GB4962@atomide.com> References: <4452384E.7080409@gmail.com> <20060505110852.66e6f39d.Hiroshi.DOYU@nokia.com> <4477F3E1.4000301@gmail.com> <200605270843.54940.david-b@pacbell.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <200605270843.54940.david-b@pacbell.net> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces+gplao-linux-omap-open-source=gmane.org@linux.omap.com Errors-To: linux-omap-open-source-bounces+gplao-linux-omap-open-source=gmane.org@linux.omap.com To: David Brownell Cc: Hiroshi DOYU , linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org * David Brownell [060527 08:44]: > On Friday 26 May 2006 11:38 pm, Dirk Behme wrote: > > Hi, > > > > with recent git I still get > > > > WARNING: "usb_disconnect" [drivers/usb/host/ohci-hcd.ko] > > undefined! > > Try the attached patch instead ... it fixes some other glitches > in the OMAP bus glue, as well as those. > > - Dave > > > > > Various fixes for the OHCI OMAP glue: > > - Properly use the usbcore HCD lifecycle entry points > > - Remove calls to non-exported usbcore routines. > > - Stop inappropriate export of some bus glue calls > > Plus remove some extra whitespace. I'll push this today slightly updated. Sorry, I should have pushed this earlier. Dave, I assume you will eventually send this upstream through your USB channels so I did not tag this as a ARM: OMAP: patch. Regards, Tony