Re: Problem booting in OMAP H3 1710

[imre.deak@solidboot.com]

Hi,

On Mon, Jul 24, 2006 at 11:27:09AM -0400, Carlos Aguiar wrote:
> Hello folks,
> 
> I'm trying to boot a kernel image to OMAP H3 1710 generated from
> linux-omap-2.6.git (v2.6.17-omap1) tree, but I'm having the following
> problem (kernel panic) below.
> 
> This kernel image it's with 'Kernel low-level debugging functions' support.
> 
> Is there anybody having the same problem ?

I think this bug was fixed by
http://linux.omap.com/pipermail/linux-omap-open-source/2006-July/007515.html

It's been also pushed to the omap tree yesterday. Could you check
if you have it locally?

--Imre

> 
> Thanks in advance,
> 
> Carlos.
> 
> ...
> 
> <6>omapfb: configured for panel h3
> <6>omapfb: LCDC initialized
> <1>Unable to handle kernel paging request at virtual address 00009600
> <1>pgd = c0004000
> <1>[00009600] *pgd=00000000
> Internal error: Oops: 805 [#1]
> Modules linked in:
> CPU: 0
> PC is at cfb_imageblit+0x210/0x49c
> LR is at 0x6
> pc : [<c01000b8>]    lr : [<00000006>]    Not tainted
> sp : c02b39e4  ip : c02c0000  fp : c02b3a54
> r10: 00000002  r9 : c02c0000  r8 : 00000000
> r7 : c01f75a8  r6 : 00000000  r5 : c034f800  r4 : 00009600
> r3 : 00000000  r2 : 00000007  r1 : 00000002  r0 : 00000004
> Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  Segment kernel
> Control: 5317F  Table: 10004000  DAC: 00000017
> Process swapper (pid: 1, stack limit = 0xc02b2198)