Re: [patch 2.6.18-omap-git] omap2 fullspeed usb 2/2 (apollon)

[David Brownell <david-b@pacbell.net>]

On Sunday 22 October 2006 9:46 pm, Kyungmin Park wrote:
> [PATCH] USB device support on Apollon
>  
>   Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>


So this is what I sent but without the set_irq_type() stuff that somehow
got in, right?

Have you verified that it's stil behaving on your board?

- Dave


> ----
> 
> diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-
> omap2/board-apollon.c
> index 99651b2..e1e2246 100644
> --- a/arch/arm/mach-omap2/board-apollon.c
> +++ b/arch/arm/mach-omap2/board-apollon.c
> @@ -235,6 +235,13 @@ static struct omap_mmc_config apollon_mm
>  	},
>  };
>  
> +static struct omap_usb_config apollon_usb_config __initdata = {
> +	.register_dev	= 1,
> +	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
> +
> +	.pins[0]	= 6,
> +};
> +
>  static struct omap_lcd_config apollon_lcd_config __initdata = {
>  	.ctrl_name	= "internal",
>  };
> @@ -242,6 +249,7 @@ static struct omap_lcd_config apollon_lc
>  static struct omap_board_config_kernel apollon_config[] = {
>  	{ OMAP_TAG_UART,	&apollon_uart_config },
>  	{ OMAP_TAG_MMC,		&apollon_mmc_config },
> +	{ OMAP_TAG_USB,		&apollon_usb_config },
>  	{ OMAP_TAG_LCD,		&apollon_lcd_config },
>  };
>  
> @@ -310,11 +318,22 @@ static void __init apollon_sw_init(void)
>  		return;
>  }
>  
> +static void __init apollon_usb_init(void)
> +{
> +	/* USB device */
> +	/* DEVICE_SUSPEND */
> +	omap_cfg_reg(P21_242X_GPIO12);
> +	omap_request_gpio(12);
> +	omap_set_gpio_direction(12, 0);		/* OUT */
> +	omap_set_gpio_dataout(12, 0);
> +}
> +
>  static void __init omap_apollon_init(void)
>  {
>  	apollon_led_init();
>  	apollon_sw_init();
>  	apollon_flash_init();
> +	apollon_usb_init();
>  
>  	/* REVISIT: where's the correct place */
>  	omap_cfg_reg(W19_24XX_SYS_NIRQ);
>