From: "Marek Vašut" <marek.vasut@gmail.com>
To: linux-omap-open-source@linux.omap.com
Subject: PalmTT
Date: Tue, 7 Nov 2006 21:58:15 +0100 [thread overview]
Message-ID: <200611072158.15804.marek.vasut@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 804 bytes --]
Hi,
I´ve pulled latest git snapshot and it seems palmtt is there (all four
patches - board, defconfig, lcd, leds), but as Tony wrote I had to fix those
tabs (formating) before it´ll be (maybe ;-)) merged. I havent seen any
mention about merging TT on gitweb so I was just curious why is it there :)
Well ... doesnt matter ... here´s a patch that fixes formating in
board-palmtt.c and lcd-palmtt.c (formating - tabs and removing commented
code). I´ve also made a small change to board-palmz71.c formating.
Plus I changed GPIO 6 name in board-palmz71(tt).h (renamed
PALMxxx_PINTDAV_GPIO to PALMxxx_PENIRQ_GPIO, where xxx=TT or Z71). Hope it
doesnt matter I put it into one patch while it´s a small (one line - see the
bottom of the patch) change.
Patch is enclosed.
BR
Marek
[-- Attachment #2: palmtt_palmz71_formating_fixes.patch --]
[-- Type: text/x-diff, Size: 17147 bytes --]
diff -Naur linux-omap-current/arch/arm/mach-omap1/board-palmtt.c linux-omap/arch/arm/mach-omap1/board-palmtt.c
--- linux-omap-current/arch/arm/mach-omap1/board-palmtt.c 2006-11-03 19:30:45.000000000 +0100
+++ linux-omap/arch/arm/mach-omap1/board-palmtt.c 2006-11-03 20:40:38.000000000 +0100
@@ -63,40 +63,40 @@
static struct mtd_partition palmtt_partitions[] = {
{
- .name = "write8k",
- .offset = 0,
- .size = SZ_8K,
- .mask_flags = 0,
+ .name = "write8k",
+ .offset = 0,
+ .size = SZ_8K,
+ .mask_flags = 0,
},
{
- .name = "PalmOS-BootLoader(ro)",
- .offset = SZ_8K,
- .size = 7*SZ_8K,
- .mask_flags = MTD_WRITEABLE,
+ .name = "PalmOS-BootLoader(ro)",
+ .offset = SZ_8K,
+ .size = 7*SZ_8K,
+ .mask_flags = MTD_WRITEABLE,
},
{
- .name = "u-boot",
- .offset = MTDPART_OFS_APPEND,
- .size = 8*SZ_8K,
- .mask_flags = 0,
+ .name = "u-boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8*SZ_8K,
+ .mask_flags = 0,
},
{
- .name = "PalmOS-FS(ro)",
- .offset = MTDPART_OFS_APPEND,
- .size = 7*SZ_1M + 4*SZ_64K - 16*SZ_8K,
- .mask_flags = MTD_WRITEABLE,
+ .name = "PalmOS-FS(ro)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 7*SZ_1M + 4*SZ_64K - 16*SZ_8K,
+ .mask_flags = MTD_WRITEABLE,
},
{
- .name = "u-boot(rez)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = 0
+ .name = "u-boot(rez)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0
},
{
- .name = "empty",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
+ .name = "empty",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
}
};
@@ -126,18 +126,20 @@
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) |
+ RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) |
+ XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+ .srgr2 = GSYNC | CLKSP | FSGM |
+ FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+ .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
@@ -153,8 +155,8 @@
static struct platform_device palmtt_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
+ .id = 1,
+ .dev = {
.platform_data = &alsa_config,
},
};
@@ -188,69 +190,69 @@
.id = -1,
};
static struct omap_irda_config palmtt_irda_config = {
- .transceiver_cap = IR_SIRMODE,
- .rx_channel = OMAP_DMA_UART3_RX,
- .tx_channel = OMAP_DMA_UART3_TX,
- .dest_start = UART3_THR,
- .src_start = UART3_RHR,
- .tx_trigger = 0,
- .rx_trigger = 0,
+ .transceiver_cap = IR_SIRMODE,
+ .rx_channel = OMAP_DMA_UART3_RX,
+ .tx_channel = OMAP_DMA_UART3_TX,
+ .dest_start = UART3_THR,
+ .src_start = UART3_RHR,
+ .tx_trigger = 0,
+ .rx_trigger = 0,
};
static struct resource palmtt_irda_resources[] = {
- [0] = {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = {
+ .start = INT_UART3,
+ .end = INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device palmtt_irda_device = {
- .name = "omapirda",
- .id = -1,
- .dev = {
- .platform_data = &palmtt_irda_config,
- },
- .num_resources = ARRAY_SIZE(palmtt_irda_resources),
- .resource = palmtt_irda_resources,
+ .name = "omapirda",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtt_irda_config,
+ },
+ .num_resources = ARRAY_SIZE(palmtt_irda_resources),
+ .resource = palmtt_irda_resources,
};
static struct platform_device palmtt_spi_device = {
- .name = "spi_palmtt",
- .id = -1,
+ .name = "spi_palmtt",
+ .id = -1,
};
static struct omap_backlight_config palmtt_backlight_config = {
- .default_intensity = 0xa0,
+ .default_intensity = 0xa0,
};
static struct platform_device palmtt_backlight_device = {
- .name = "omap-bl",
- .id = -1,
- .dev = {
- .platform_data = &palmtt_backlight_config,
- },
+ .name = "omap-bl",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtt_backlight_config,
+ },
};
static struct omap_led_config palmtt_led_config[] = {
- {
- .cdev = {
- .name = "palmtt:led0",
+ {
+ .cdev = {
+ .name = "palmtt:led0",
},
- .gpio = PALMTT_LED_GPIO,
+ .gpio = PALMTT_LED_GPIO,
},
};
static struct omap_led_platform_data palmtt_led_data = {
- .nr_leds = ARRAY_SIZE(palmtt_led_config),
- .leds = palmtt_led_config,
+ .nr_leds = ARRAY_SIZE(palmtt_led_config),
+ .leds = palmtt_led_config,
};
static struct platform_device palmtt_led_device = {
- .name = "omap-led",
- .id = -1,
- .dev = {
- .platform_data = &palmtt_led_data,
+ .name = "omap-led",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtt_led_data,
},
};
@@ -262,34 +264,34 @@
&palmtt_irda_device,
&palmtt_spi_device,
&palmtt_backlight_device,
- &palmtt_led_device,
+ &palmtt_led_device,
};
static int palmtt_get_pendown_state(void)
{
- return !omap_get_gpio_datain(6);
+ return !omap_get_gpio_datain(PALMTT_PENIRQ_GPIO);
}
static const struct ads7846_platform_data palmtt_ts_info = {
- .model = 7846,
- .vref_delay_usecs = 100, /* internal, no capacitor */
- .x_plate_ohms = 419,
- .y_plate_ohms = 486,
- .get_pendown_state = palmtt_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmtt_boardinfo[] = { {
- /* MicroWire (bus 2) CS0 has an ads7846e */
- .modalias = "ads7846",
- .platform_data = &palmtt_ts_info,
- .irq = OMAP_GPIO_IRQ(6),
- .max_speed_hz = 120000 /* max sample rate at 3V */
- * 26 /* command + data + overhead */,
- .bus_num = 2,
- .chip_select = 0,
-} };
-
-//static int __initdata palmtt_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .get_pendown_state = palmtt_get_pendown_state,
+};
+
+static struct spi_board_info __initdata palmtt_boardinfo[] = {
+ {
+ /* MicroWire (bus 2) CS0 has an ads7846e */
+ .modalias = "ads7846",
+ .platform_data = &palmtt_ts_info,
+ .irq = OMAP_GPIO_IRQ(PALMTT_PENIRQ_GPIO),
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 2,
+ .chip_select = 0,
+ }
+};
static void __init omap_palmtt_init_irq(void)
{
@@ -308,7 +310,7 @@
};
static struct omap_uart_config palmtt_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
+ .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
static struct omap_board_config_kernel palmtt_config[] = {
@@ -316,19 +318,6 @@
{ OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_UART, &palmtt_uart_config },
};
-/*should be fixed soon*/
-/*static irqreturn_t
-palmtt_powercable(int irq, void *dev_id, struct pt_regs *regs)
-{
- if (omap_get_gpio_datain(PALMTT_USBDETECT_GPIO)) {
- printk(KERN_INFO "PM: USB cable connected (charging)\n");
- set_irq_type(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), IRQT_FALLING);
- } else {
- printk(KERN_INFO "PM: USB cable disconnected\n");
- set_irq_type(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), IRQT_RISING);
- }
- return IRQ_HANDLED;
-}*/
static void __init omap_mpu_wdt_mode(int mode) {
if (mode)
@@ -338,28 +327,9 @@
omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
}
}
-/*needs to be fixed, this will be simple*/
-/*static void __init palmtt_gpio_setup(int early)
-{
- if (early) {
- omap_set_gpio_dataout(1,1);
- omap_set_gpio_direction(1,0);
- } else {
- if (omap_request_gpio(PALMTT_USBDETECT_GPIO)) {
- printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
- return;
- }
- omap_set_gpio_direction(PALMTT_USBDETECT_GPIO, 1);
- if (request_irq(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), palmtt_powercable,
- SA_SAMPLE_RANDOM, "palmtt-cable", 0))
- printk(KERN_ERR "IRQ request for power cable failed!\n");
- palmtt_powercable(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), 0, 0);
- }
-}*/
static void __init omap_palmtt_init(void)
{
-// palmtt_gpio_setup(1);
omap_mpu_wdt_mode(0);
omap_board_config = palmtt_config;
@@ -369,7 +339,6 @@
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
-// palmtt_gpio_setup(0);
}
static void __init omap_palmtt_map_io(void)
@@ -377,7 +346,7 @@
omap1_map_common_io();
}
-MACHINE_START(OMAP_PALMTT, "PalmTT")
+MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
diff -Naur linux-omap-current/arch/arm/mach-omap1/board-palmz71.c linux-omap/arch/arm/mach-omap1/board-palmz71.c
--- linux-omap-current/arch/arm/mach-omap1/board-palmz71.c 2006-11-03 19:30:45.000000000 +0100
+++ linux-omap/arch/arm/mach-omap1/board-palmz71.c 2006-11-03 20:40:20.000000000 +0100
@@ -182,18 +182,17 @@
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP, *//* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+ .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+ .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
@@ -240,7 +239,7 @@
static int
palmz71_get_pendown_state(void)
{
- return !omap_get_gpio_datain(6);
+ return !omap_get_gpio_datain(PALMZ71_PENIRQ_GPIO);
}
static const struct ads7846_platform_data palmz71_ts_info = {
@@ -252,16 +251,17 @@
};
static struct spi_board_info __initdata palmz71_boardinfo[] = {
-{
+ {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &palmz71_ts_info,
- .irq = OMAP_GPIO_IRQ(6),
- .max_speed_hz = 120000 /* max sample rate at 3V */
- * 26 /* command + data + overhead */,
+ .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
.bus_num = 2,
.chip_select = 0,
-} };
+ }
+};
static struct omap_usb_config palmz71_usb_config __initdata = {
.register_dev = 1, /* Mini-B only receptacle */
@@ -288,10 +288,10 @@
};
static struct omap_board_config_kernel palmz71_config[] = {
- {OMAP_TAG_USB, &palmz71_usb_config},
- {OMAP_TAG_MMC, &palmz71_mmc_config},
- {OMAP_TAG_LCD, &palmz71_lcd_config},
- {OMAP_TAG_UART, &palmz71_uart_config},
+ {OMAP_TAG_USB, &palmz71_usb_config},
+ {OMAP_TAG_MMC, &palmz71_mmc_config},
+ {OMAP_TAG_LCD, &palmz71_lcd_config},
+ {OMAP_TAG_UART, &palmz71_uart_config},
};
static irqreturn_t
@@ -343,10 +343,9 @@
}
omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
- palmz71_powercable, SA_SAMPLE_RANDOM,
- "palmz71-cable", 0))
- printk(KERN_ERR
- "IRQ request for power cable failed!\n");
+ palmz71_powercable, SA_SAMPLE_RANDOM, "palmz71-cable", 0))
+ printk(KERN_ERR
+ "IRQ request for power cable failed!\n");
palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0, 0);
}
}
diff -Naur linux-omap-current/drivers/video/omap/lcd_palmtt.c linux-omap/drivers/video/omap/lcd_palmtt.c
--- linux-omap-current/drivers/video/omap/lcd_palmtt.c 2006-11-03 19:31:00.000000000 +0100
+++ linux-omap/drivers/video/omap/lcd_palmtt.c 2006-11-03 20:47:44.000000000 +0100
@@ -60,26 +60,28 @@
}
struct lcd_panel palmtt_panel = {
- .name = "palmtt",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE | OMAP_LCDC_HSVS_OPPOSITE,
- .bpp = 16,
- .data_lines = 16,
- .x_res = 320,
- .y_res = 320,
- .pixel_clock = 10000,
- .hsw = 4,
- .hfp = 8,
- .hbp = 28,
- .vsw = 1,
- .vfp = 8,
- .vbp = 7,
- .pcd = 0,
-
- .init = palmtt_panel_init,
- .cleanup = palmtt_panel_cleanup,
- .enable = palmtt_panel_enable,
- .disable = palmtt_panel_disable,
- .get_caps= palmtt_panel_get_caps,
+ .name = "palmtt",
+ .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+ OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
+ OMAP_LCDC_HSVS_OPPOSITE,
+ .bpp = 16,
+ .data_lines = 16,
+ .x_res = 320,
+ .y_res = 320,
+ .pixel_clock = 10000,
+ .hsw = 4,
+ .hfp = 8,
+ .hbp = 28,
+ .vsw = 1,
+ .vfp = 8,
+ .vbp = 7,
+ .pcd = 0,
+
+ .init = palmtt_panel_init,
+ .cleanup = palmtt_panel_cleanup,
+ .enable = palmtt_panel_enable,
+ .disable = palmtt_panel_disable,
+ .get_caps = palmtt_panel_get_caps,
};
static int palmtt_panel_probe(struct platform_device *pdev)
@@ -126,4 +128,3 @@
module_init(palmtt_panel_drv_init);
module_exit(palmtt_panel_drv_cleanup);
-
diff -Naur linux-omap-current/drivers/video/omap/lcd_palmz71.c linux-omap/drivers/video/omap/lcd_palmz71.c
--- linux-omap-current/drivers/video/omap/lcd_palmz71.c 2006-11-03 19:31:00.000000000 +0100
+++ linux-omap/drivers/video/omap/lcd_palmz71.c 2006-11-03 20:47:52.000000000 +0100
@@ -30,8 +30,6 @@
#include <asm/arch/gpio.h>
#include <asm/arch/omapfb.h>
-/* #define OMAPFB_DBG 1 */
-
static int palmz71_panel_init(struct omapfb_device *panel)
{
return 0;
diff -Naur linux-omap-current/include/asm-arm/arch-omap/board-palmtt.h linux-omap/include/asm-arm/arch-omap/board-palmtt.h
--- linux-omap-current/include/asm-arm/arch-omap/board-palmtt.h 2006-11-03 19:31:16.000000000 +0100
+++ linux-omap/include/asm-arm/arch-omap/board-palmtt.h 2006-11-03 20:24:51.000000000 +0100
@@ -16,8 +16,8 @@
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
#define PALMTT_LED_GPIO 3
-#define PALMTT_PINTDAV_GPIO 6
+#define PALMTT_PENIRQ_GPIO 6
#define PALMTT_MMC_WP_GPIO 8
-#define PALMTT_HDQ_GPIO 11
+#define PALMTT_HDQ_GPIO 11
#endif /* __OMAP_BOARD_PALMTT_H */
diff -Naur linux-omap-current/include/asm-arm/arch-omap/board-palmz71.h linux-omap/include/asm-arm/arch-omap/board-palmz71.h
--- linux-omap-current/include/asm-arm/arch-omap/board-palmz71.h 2006-11-03 19:31:16.000000000 +0100
+++ linux-omap/include/asm-arm/arch-omap/board-palmz71.h 2006-11-03 20:34:43.000000000 +0100
@@ -14,7 +14,7 @@
#define __OMAP_BOARD_PALMZ71_H
#define PALMZ71_USBDETECT_GPIO 0
-#define PALMZ71_PINTDAV_GPIO 6
+#define PALMZ71_PENIRQ_GPIO 6
#define PALMZ71_MMC_WP_GPIO 8
#define PALMZ71_HDQ_GPIO 11
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
next reply other threads:[~2006-11-07 20:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-07 20:58 Marek Vašut [this message]
2006-11-10 0:16 ` PalmTT Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200611072158.15804.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox