Re: Compiling latest kernel (from kernel.org, linux-omap git version) in n800

Leandro Melo de Sales
2007-04-22T17:23:43Z

Hello Felipe,

still in problems! :( I did what you suggested and after the latest
./flasher command I unplug the charger and the usb cable. When I turn
on the device, I got just a white screen. Even the Nokia logo is not
shown anymore.
What can I do now?

Best regards,
Leandro

2007/4/21, Felipe Balbi <felipebalbi@users.sourceforge.net>:
> Hello Leandro,
>
> The device just keeps on Nokia,
> it doesn't reboots on something like that??
>
> try this:
>
> ./flasher --enable-rd-mode -f
>
> ./flasher -k <your kernel> -f
>
> ./flasher --set-rd-flags=no-lifeguard-reset -f
>
> I think this will do the trick, hopefully
>
>
> On 4/22/07, Leandro Melo de Sales <leandroal@gmail.com> wrote:
> > Hi,
> >
> > I finally compile linux-omap git version in my scratchbox. So, I
> > tried to flash the new zImage generated by the compilation process
> > into my n800. I plugged the device using usb cable and typed:
> >
> > ./flasher-3.0 -f -k
> > /scratchbox/users/leandro/home/leandro/maemo_kernel_git/linux-omap-dev-2.6.git/arch/arm/boot/zImage
> >
> > The kernel image is transfered to n800 as shown bellow:
> >
> > USB device found found at bus 005, device address 011
> > Found device RX-34, hardware revision 1301
> > NOLO version 1.1.6
> > Version of 'sw-release': <no version>
> > Sending kernel image (1436 kB)...
> > 100% (1436 of 1436 kB, avg. 21438 kB/s)
> > Flashing kernel... done.
> >
> > But when I switch on the device, just the name "Nokia" is shown and
> > nothing more!
> >
> > I reflashed the device with latest OS 2007 release.
> >
> > Any clue?
> > Leandro.
> >
> > 2007/4/19, Jarkko Nikula <jarkko.nikula@nokia.com>:
> > > On Wed, 18 Apr 2007 19:38:55 +0000
> > > "ext Tony Lindgren" <tony@atomide.com> wrote:
> > >
> > > > * Dirk Behme <dirk.behme@googlemail.com> [070418 18:31]:
> > > > > Btw.: Just noticed that Kai Svahn registered mach number
> > > > > 1271 for N800 in machine registry.
> > > > >
> > > > > [1] http://www.arm.linux.org.uk/developer/machines/
> > > >
> > > > The latest bootloader uses the 1271 id already so here's the updated
> > > > patch.
> > > >
> > > For machine id 1271, reflash the device with latest OS 2007 release
> > >
> > > https://maemo.org/#date_23032007
> > >
> > > That should update the bootloader also to use official id 1271.
> > >
> > >
> > > --
> > > Jarkko
> > >
> > _______________________________________________
> > Linux-omap-open-source mailing list
> > Linux-omap-open-source@linux.omap.com
> > http://linux.omap.com/mailman/listinfo/linux-omap-open-source
> >
>
>
> --
> Best Regards,
>
> Felipe Balbi
> felipebalbi@users.sourceforge.net
>