From: Paul Walmsley <paul@pwsan.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 3/5] omap2: use PRCM_BASE in place of OMAP24XX_PRCM_BASE
Date: Wed, 16 May 2007 16:58:53 -0600 [thread overview]
Message-ID: <20070516231342.320294053@pwsan.com> (raw)
In-Reply-To: 20070516225850.075133914@pwsan.com
[-- Attachment #1: 0003-omap2-use-PRCM_BASE-in-place-of-OMAP24XX_PRCM_BASE.patch --]
[-- Type: text/plain, Size: 3470 bytes --]
Change users of OMAP24XX_PRCM_BASE to use PRCM_BASE. Remove
the OMAP24XX_PRCM_BASE define.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/mmu.c | 2 +-
arch/arm/mach-omap2/pm.c | 2 +-
arch/arm/mach-omap2/prcm-regs.h | 2 +-
arch/arm/mach-omap2/sram-fn.S | 12 ++++++------
include/asm-arm/arch-omap/omap24xx.h | 1 -
5 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-omap2/mmu.c b/arch/arm/mach-omap2/mmu.c
index 2a52907..1f68d15 100644
--- a/arch/arm/mach-omap2/mmu.c
+++ b/arch/arm/mach-omap2/mmu.c
@@ -96,7 +96,7 @@ static int exmap_setup_preserved_entries(struct omap_mmu *mmu)
exmap_setup_preserved_mem_page(mmu, dspvect_page, DSP_INIT_PAGE, n++);
- exmap_setup_iomap_page(mmu, OMAP24XX_PRCM_BASE, 0x7000, n++);
+ exmap_setup_iomap_page(mmu, PRCM_BASE, 0x7000, n++);
exmap_setup_iomap_page(mmu, OMAP24XX_MAILBOX_BASE, 0x11000, n++);
if (cpu_is_omap2420()) {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 0c84a18..ad70280 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -144,7 +144,7 @@ static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(int dllctrl);
static void (*saved_idle)(void);
-static u32 prcm_base = IO_ADDRESS(OMAP24XX_PRCM_BASE);
+static u32 prcm_base = IO_ADDRESS(PRCM_BASE);
static inline void prcm_write_reg(int idx, u32 val)
{
diff --git a/arch/arm/mach-omap2/prcm-regs.h b/arch/arm/mach-omap2/prcm-regs.h
index 4672a2c..c5bb9b6 100644
--- a/arch/arm/mach-omap2/prcm-regs.h
+++ b/arch/arm/mach-omap2/prcm-regs.h
@@ -29,7 +29,7 @@
#ifndef __ASSEMBLER__
-#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset))
+#define PRCM_REG32(offset) __REG32(PRCM_BASE + (offset))
#define PRCM_REVISION PRCM_REG32(0x000)
#define PRCM_SYSCONFIG PRCM_REG32(0x010)
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
index 9109b02..c9c53e6 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -31,12 +31,12 @@
#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010)
-#define CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544)
-#define PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050)
-#define PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080)
-#define CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500)
-#define CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520)
-#define CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540)
+#define CM_CLKSEL2_PLL_V IO_ADDRESS(PRCM_BASE + 0x544)
+#define PRCM_VOLTCTRL_V IO_ADDRESS(PRCM_BASE + 0x050)
+#define PRCM_CLKCFG_CTRL_V IO_ADDRESS(PRCM_BASE + 0x080)
+#define CM_CLKEN_PLL_V IO_ADDRESS(PRCM_BASE + 0x500)
+#define CM_IDLEST_CKGEN_V IO_ADDRESS(PRCM_BASE + 0x520)
+#define CM_CLKSEL1_PLL_V IO_ADDRESS(PRCM_BASE + 0x540)
#define SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060)
#define SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4)
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
index a56a431..5f5b40b 100644
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ b/include/asm-arm/arch-omap/omap24xx.h
@@ -74,7 +74,6 @@
/* Temporary defines to be cleaned up in following patches */
#define OMAP24XX_SDRC_BASE SDRC_BASE
-#define OMAP24XX_PRCM_BASE PRCM_BASE
#define OMAP24XX_CTRL_BASE CTRL_BASE
#endif /* __ASM_ARCH_OMAP24XX_H */
--
1.5.1.3
--
next prev parent reply other threads:[~2007-05-16 22:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-16 22:58 [PATCH 0/5] Clean up omap24xx.h symbolic constants Paul Walmsley
2007-05-16 22:58 ` [PATCH 1/5] omap2: modify omap24xx.h to improve constant names and prepare for multi-arch kernels Paul Walmsley
2007-05-16 22:58 ` [PATCH 2/5] omap2: use OMAP24XX_32KSYNCT_BASE in place of OMAP_32KSYNCT_BASE Paul Walmsley
2007-05-16 22:58 ` Paul Walmsley [this message]
2007-05-16 22:58 ` [PATCH 4/5] omap2: use SDRC_BASE in place of OMAP24XX_SDRC_BASE Paul Walmsley
2007-05-16 22:58 ` [PATCH 5/5] omap2: use CTRL_BASE in place of OMAP24XX_CTRL_BASE Paul Walmsley
2007-05-17 8:28 ` [PATCH 0/5] Clean up omap24xx.h symbolic constants Dmitry Krivoschekov
2007-05-17 17:43 ` Tony Lindgren
2007-05-17 17:53 ` Syed Mohammed, Khasim
2007-05-17 18:14 ` Tony Lindgren
2007-05-17 19:11 ` Syed Mohammed, Khasim
2007-05-21 16:52 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070516231342.320294053@pwsan.com \
--to=paul@pwsan.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox