From: Paul Walmsley <paul@pwsan.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 4/5] omap2: use SDRC_BASE in place of OMAP24XX_SDRC_BASE
Date: Wed, 16 May 2007 16:58:54 -0600 [thread overview]
Message-ID: <20070516231342.414350673@pwsan.com> (raw)
In-Reply-To: 20070516225850.075133914@pwsan.com
[-- Attachment #1: 0004-omap2-use-SDRC_BASE-in-place-of-OMAP24XX_SDRC_BASE.patch --]
[-- Type: text/plain, Size: 4276 bytes --]
Change users of OMAP24XX_SDRC_BASE to use SDRC_BASE. Remove the
OMAP24XX_SDRC_BASE define.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/prcm-regs.h | 14 +++++++-------
arch/arm/mach-omap2/sleep.S | 10 ++++++----
arch/arm/mach-omap2/sram-fn.S | 4 ++--
include/asm-arm/arch-omap/io.h | 2 +-
include/asm-arm/arch-omap/omap24xx.h | 1 -
5 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-omap2/prcm-regs.h b/arch/arm/mach-omap2/prcm-regs.h
index c5bb9b6..3c0688c 100644
--- a/arch/arm/mach-omap2/prcm-regs.h
+++ b/arch/arm/mach-omap2/prcm-regs.h
@@ -199,7 +199,7 @@
#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6A054)
#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6C054)
#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6E054)
-#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE + 0x10)
+#define SDRC_SYSCONFIG __REG32(SDRC_BASE + 0x10)
#define OMAP24XX_SMS_BASE (L3_24XX_BASE + 0x8000)
#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE + 0x10)
#define SSI_SYSCONFIG __REG32(DISP_BASE + 0x8010)
@@ -263,12 +263,12 @@
#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE + 0x78018)
/* SDRC */
-#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x060)
-#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x064)
-#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x068)
-#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x06C)
-#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE + 0x070)
-#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE + 0x084)
+#define SDRC_DLLA_CTRL __REG32(SDRC_BASE + 0x060)
+#define SDRC_DLLA_STATUS __REG32(SDRC_BASE + 0x064)
+#define SDRC_DLLB_CTRL __REG32(SDRC_BASE + 0x068)
+#define SDRC_DLLB_STATUS __REG32(SDRC_BASE + 0x06C)
+#define SDRC_POWER __REG32(SDRC_BASE + 0x070)
+#define SDRC_MR_0 __REG32(SDRC_BASE + 0x084)
/* GPIO 1 */
#define GPIO1_BASE GPIOX_BASE(1)
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index a67bc18..ce9005d 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -30,11 +30,13 @@
#include <asm/arch/io.h>
#include <asm/arch/pm.h>
-#define A_SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60)
-#define A_SDRC_POWER_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70)
-#define A_SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4)
+#include <asm/arch/omap24xx.h>
+
+#define A_SDRC_DLLA_CTRL_V IO_ADDRESS(SDRC_BASE + 0x60)
+#define A_SDRC_POWER_V IO_ADDRESS(SDRC_BASE + 0x70)
+#define A_SDRC_RFR_CTRL_V IO_ADDRESS(SDRC_BASE + 0xA4)
#define A_SDRC0_V (0xC0000000)
-#define A_SDRC_MANUAL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA8)
+#define A_SDRC_MANUAL_V IO_ADDRESS(SDRC_BASE + 0xA8)
.text
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
index c9c53e6..3fe3a34 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -38,8 +38,8 @@
#define CM_IDLEST_CKGEN_V IO_ADDRESS(PRCM_BASE + 0x520)
#define CM_CLKSEL1_PLL_V IO_ADDRESS(PRCM_BASE + 0x540)
-#define SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060)
-#define SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4)
+#define SDRC_DLLA_CTRL_V IO_ADDRESS(SDRC_BASE + 0x060)
+#define SDRC_RFR_CTRL_V IO_ADDRESS(SDRC_BASE + 0x0a4)
.text
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 28ae4d9..403b707 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -80,7 +80,7 @@
#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */
#define OMAP243X_GPMC_VIRT 0xFE000000
#define OMAP243X_GPMC_SIZE SZ_1M
-#define OMAP243X_SDRC_PHYS OMAP24XX_SDRC_BASE
+#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
#define OMAP243X_SDRC_VIRT 0xFD000000
#define OMAP243X_SDRC_SIZE SZ_1M
#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
index 5f5b40b..fd9d48b 100644
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ b/include/asm-arm/arch-omap/omap24xx.h
@@ -73,7 +73,6 @@
#endif
/* Temporary defines to be cleaned up in following patches */
-#define OMAP24XX_SDRC_BASE SDRC_BASE
#define OMAP24XX_CTRL_BASE CTRL_BASE
#endif /* __ASM_ARCH_OMAP24XX_H */
--
1.5.1.3
--
next prev parent reply other threads:[~2007-05-16 22:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-16 22:58 [PATCH 0/5] Clean up omap24xx.h symbolic constants Paul Walmsley
2007-05-16 22:58 ` [PATCH 1/5] omap2: modify omap24xx.h to improve constant names and prepare for multi-arch kernels Paul Walmsley
2007-05-16 22:58 ` [PATCH 2/5] omap2: use OMAP24XX_32KSYNCT_BASE in place of OMAP_32KSYNCT_BASE Paul Walmsley
2007-05-16 22:58 ` [PATCH 3/5] omap2: use PRCM_BASE in place of OMAP24XX_PRCM_BASE Paul Walmsley
2007-05-16 22:58 ` Paul Walmsley [this message]
2007-05-16 22:58 ` [PATCH 5/5] omap2: use CTRL_BASE in place of OMAP24XX_CTRL_BASE Paul Walmsley
2007-05-17 8:28 ` [PATCH 0/5] Clean up omap24xx.h symbolic constants Dmitry Krivoschekov
2007-05-17 17:43 ` Tony Lindgren
2007-05-17 17:53 ` Syed Mohammed, Khasim
2007-05-17 18:14 ` Tony Lindgren
2007-05-17 19:11 ` Syed Mohammed, Khasim
2007-05-21 16:52 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070516231342.414350673@pwsan.com \
--to=paul@pwsan.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox