From: Paul Walmsley <paul@pwsan.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 18/18] omap2: remove prcm-regs.h
Date: Wed, 16 May 2007 18:11:50 -0600 [thread overview]
Message-ID: <20070517005444.865670691@pwsan.com> (raw)
In-Reply-To: 20070517001132.652728079@pwsan.com
[-- Attachment #1: 0018-omap2-remove-prcm-regs.h.patch --]
[-- Type: text/plain, Size: 19036 bytes --]
All of the users of prcm-regs.h have been patched - remove prcm-regs.h.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/prcm-regs.h | 472 ----------------------------------------
1 file changed, 472 deletions(-)
delete mode 100644 arch/arm/mach-omap2/prcm-regs.h
Index: linux-omap/arch/arm/mach-omap2/prcm-regs.h
===================================================================
--- linux-omap.orig/arch/arm/mach-omap2/prcm-regs.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/prcm-regs.h
- *
- * OMAP24XX Power Reset and Clock Management (PRCM) registers
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H
-#define __ARCH_ARM_MACH_OMAP2_PRCM_H
-
-/* SET_PERFORMANCE_LEVEL PARAMETERS */
-#define PRCM_HALF_SPEED 1
-#define PRCM_FULL_SPEED 2
-
-#ifndef __ASSEMBLER__
-
-#define PRCM_REG32(offset) __REG32(PRCM_BASE + (offset))
-
-#define PRCM_REVISION PRCM_REG32(0x000)
-#define PRCM_SYSCONFIG PRCM_REG32(0x010)
-#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018)
-#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C)
-#define PRCM_VOLTCTRL PRCM_REG32(0x050)
-#define PRCM_VOLTST PRCM_REG32(0x054)
-#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060)
-#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070)
-#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078)
-#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080)
-#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084)
-#define PRCM_VOLTSETUP PRCM_REG32(0x090)
-#define PRCM_CLKSSETUP PRCM_REG32(0x094)
-#define PRCM_POLCTRL PRCM_REG32(0x098)
-
-/* GENERAL PURPOSE */
-#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0)
-#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4)
-#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8)
-#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC)
-#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0)
-#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4)
-#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8)
-#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC)
-#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0)
-#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4)
-#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8)
-#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC)
-#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0)
-#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4)
-#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8)
-#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC)
-#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0)
-#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4)
-#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8)
-#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC)
-
-/* MPU */
-#define CM_CLKSEL_MPU PRCM_REG32(0x140)
-#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148)
-#define RM_RSTST_MPU PRCM_REG32(0x158)
-#define PM_WKDEP_MPU PRCM_REG32(0x1C8)
-#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4)
-#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8)
-#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC)
-#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0)
-#define PM_PWSTST_MPU PRCM_REG32(0x1E4)
-
-/* CORE */
-#define CM_FCLKEN1_CORE PRCM_REG32(0x200)
-#define CM_FCLKEN2_CORE PRCM_REG32(0x204)
-#define CM_FCLKEN3_CORE PRCM_REG32(0x208)
-#define CM_ICLKEN1_CORE PRCM_REG32(0x210)
-#define CM_ICLKEN2_CORE PRCM_REG32(0x214)
-#define CM_ICLKEN3_CORE PRCM_REG32(0x218)
-#define CM_ICLKEN4_CORE PRCM_REG32(0x21C)
-#define CM_IDLEST1_CORE PRCM_REG32(0x220)
-#define CM_IDLEST2_CORE PRCM_REG32(0x224)
-#define CM_IDLEST3_CORE PRCM_REG32(0x228)
-#define CM_IDLEST4_CORE PRCM_REG32(0x22C)
-#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230)
-#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234)
-#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238)
-#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C)
-#define CM_CLKSEL1_CORE PRCM_REG32(0x240)
-#define CM_CLKSEL2_CORE PRCM_REG32(0x244)
-#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248)
-#define PM_WKEN1_CORE PRCM_REG32(0x2A0)
-#define PM_WKEN2_CORE PRCM_REG32(0x2A4)
-#define PM_WKST1_CORE PRCM_REG32(0x2B0)
-#define PM_WKST2_CORE PRCM_REG32(0x2B4)
-#define PM_WKDEP_CORE PRCM_REG32(0x2C8)
-#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0)
-#define PM_PWSTST_CORE PRCM_REG32(0x2E4)
-
-/* GFX */
-#define CM_FCLKEN_GFX PRCM_REG32(0x300)
-#define CM_ICLKEN_GFX PRCM_REG32(0x310)
-#define CM_IDLEST_GFX PRCM_REG32(0x320)
-#define CM_CLKSEL_GFX PRCM_REG32(0x340)
-#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348)
-#define RM_RSTCTRL_GFX PRCM_REG32(0x350)
-#define RM_RSTST_GFX PRCM_REG32(0x358)
-#define PM_WKDEP_GFX PRCM_REG32(0x3C8)
-#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0)
-#define PM_PWSTST_GFX PRCM_REG32(0x3E4)
-
-/* WAKE-UP */
-#define CM_FCLKEN_WKUP PRCM_REG32(0x400)
-#define CM_ICLKEN_WKUP PRCM_REG32(0x410)
-#define CM_IDLEST_WKUP PRCM_REG32(0x420)
-#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430)
-#define CM_CLKSEL_WKUP PRCM_REG32(0x440)
-#define RM_RSTCTRL_WKUP PRCM_REG32(0x450)
-#define RM_RSTTIME_WKUP PRCM_REG32(0x454)
-#define RM_RSTST_WKUP PRCM_REG32(0x458)
-#define PM_WKEN_WKUP PRCM_REG32(0x4A0)
-#define PM_WKST_WKUP PRCM_REG32(0x4B0)
-
-/* CLOCKS */
-#define CM_CLKEN_PLL PRCM_REG32(0x500)
-#define CM_IDLEST_CKGEN PRCM_REG32(0x520)
-#define CM_AUTOIDLE_PLL PRCM_REG32(0x530)
-#define CM_CLKSEL1_PLL PRCM_REG32(0x540)
-#define CM_CLKSEL2_PLL PRCM_REG32(0x544)
-
-/* DSP */
-#define CM_FCLKEN_DSP PRCM_REG32(0x800)
-#define CM_ICLKEN_DSP PRCM_REG32(0x810)
-#define CM_IDLEST_DSP PRCM_REG32(0x820)
-#define CM_AUTOIDLE_DSP PRCM_REG32(0x830)
-#define CM_CLKSEL_DSP PRCM_REG32(0x840)
-#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848)
-#define RM_RSTCTRL_DSP PRCM_REG32(0x850)
-#define RM_RSTST_DSP PRCM_REG32(0x858)
-#define PM_WKEN_DSP PRCM_REG32(0x8A0)
-#define PM_WKDEP_DSP PRCM_REG32(0x8C8)
-#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0)
-#define PM_PWSTST_DSP PRCM_REG32(0x8E4)
-#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0)
-#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4)
-
-/* IVA */
-#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8)
-#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC)
-
-/* Modem on 2430 */
-#define CM_FCLKEN_MDM PRCM_REG32(0xC00)
-#define CM_ICLKEN_MDM PRCM_REG32(0xC10)
-#define CM_IDLEST_MDM PRCM_REG32(0xC20)
-#define CM_AUTOIDLE_MDM PRCM_REG32(0xC30)
-#define CM_CLKSEL_MDM PRCM_REG32(0xC40)
-#define CM_CLKSTCTRL_MDM PRCM_REG32(0xC48)
-#define RM_RSTCTRL_MDM PRCM_REG32(0xC50)
-#define RM_RSTST_MDM PRCM_REG32(0xC58)
-#define PM_WKEN_MDM PRCM_REG32(0xCA0)
-#define PM_WKST_MDM PRCM_REG32(0xCB0)
-#define PM_WKDEP_MDM PRCM_REG32(0xCC8)
-#define PM_PWSTCTRL_MDM PRCM_REG32(0xCE0)
-#define PM_PWSTST_MDM PRCM_REG32(0xCE4)
-
-#define OMAP24XX_L4_IO_BASE 0x48000000
-
-#define DISP_BASE (OMAP24XX_L4_IO_BASE + 0x50000)
-#define DISP_REG32(offset) __REG32(DISP_BASE + (offset))
-
-#define OMAP24XX_GPMC_BASE (L3_24XX_BASE + 0xa000)
-#define GPMC_REG32(offset) __REG32(OMAP24XX_GPMC_BASE + (offset))
-
-/* FIXME: Move these to timer code */
-#define GPT1_BASE (0x48028000)
-#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset))
-
-/* Misc sysconfig */
-#define DISPC_SYSCONFIG DISP_REG32(0x410)
-#define SPI_BASE (OMAP24XX_L4_IO_BASE + 0x98000)
-#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10)
-#define MCSPI2_SYSCONFIG __REG32(SPI_BASE + 0x2000 + 0x10)
-#define MCSPI3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0xb8010)
-
-#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE + 0x2C10)
-#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE + 0x282C)
-#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE + 0x602C)
-#define GPMC_SYSCONFIG GPMC_REG32(0x010)
-#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x94010)
-#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6A054)
-#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6C054)
-#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6E054)
-#define OMAP24XX_SMS_BASE (L3_24XX_BASE + 0x8000)
-#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE + 0x10)
-#define SSI_SYSCONFIG __REG32(DISP_BASE + 0x8010)
-
-/* rkw - good cannidates for PM_ to start what nm was trying */
-#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE + 0x2A000)
-#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE + 0x78000)
-#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE + 0x7A000)
-#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE + 0x7C000)
-#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE + 0x7E000)
-#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE + 0x80000)
-#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE + 0x82000)
-#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE + 0x84000)
-#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE + 0x86000)
-#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE + 0x88000)
-#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE + 0x8A000)
-
-/* FIXME: Move these to timer code */
-#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010)
-#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10)
-#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10)
-#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10)
-#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10)
-#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10)
-#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10)
-#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10)
-#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10)
-#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10)
-#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10)
-#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10)
-
-/* FIXME: Move these to gpio code */
-#define OMAP24XX_GPIO_BASE 0x48018000
-#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE + (0x2000 * ((X) - 1)))
-
-#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1) + 0x10))
-#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2) + 0x10))
-#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3) + 0x10))
-#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4) + 0x10))
-
-#if defined(CONFIG_ARCH_OMAP2430)
-#define GPIO5_SYSCONFIG __REG32((OMAP24XX_GPIO5_BASE + 0x10))
-#endif
-
-/* GP TIMER 1 */
-#define GPTIMER1_TISTAT GPT1_REG32(0x014)
-#define GPTIMER1_TISR GPT1_REG32(0x018)
-#define GPTIMER1_TIER GPT1_REG32(0x01C)
-#define GPTIMER1_TWER GPT1_REG32(0x020)
-#define GPTIMER1_TCLR GPT1_REG32(0x024)
-#define GPTIMER1_TCRR GPT1_REG32(0x028)
-#define GPTIMER1_TLDR GPT1_REG32(0x02C)
-#define GPTIMER1_TTGR GPT1_REG32(0x030)
-#define GPTIMER1_TWPS GPT1_REG32(0x034)
-#define GPTIMER1_TMAR GPT1_REG32(0x038)
-#define GPTIMER1_TCAR1 GPT1_REG32(0x03C)
-#define GPTIMER1_TSICR GPT1_REG32(0x040)
-#define GPTIMER1_TCAR2 GPT1_REG32(0x044)
-
-/* rkw -- base fix up please... */
-#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE + 0x78018)
-
-/* GPIO 1 */
-#define GPIO1_BASE GPIOX_BASE(1)
-#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset))
-#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C)
-#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018)
-#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C)
-#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028)
-#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020)
-#define GPIO1_RISINGDETECT GPIO1_REG32(0x048)
-#define GPIO1_DATAIN GPIO1_REG32(0x038)
-#define GPIO1_OE GPIO1_REG32(0x034)
-#define GPIO1_DATAOUT GPIO1_REG32(0x03C)
-
-/* GPIO2 */
-#define GPIO2_BASE GPIOX_BASE(2)
-#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset))
-#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C)
-#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018)
-#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C)
-#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028)
-#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020)
-#define GPIO2_RISINGDETECT GPIO2_REG32(0x048)
-#define GPIO2_DATAIN GPIO2_REG32(0x038)
-#define GPIO2_OE GPIO2_REG32(0x034)
-#define GPIO2_DATAOUT GPIO2_REG32(0x03C)
-#define GPIO2_DEBOUNCENABLE GPIO2_REG32(0x050)
-#define GPIO2_DEBOUNCINGTIME GPIO2_REG32(0x054)
-
-/* GPIO 3 */
-#define GPIO3_BASE GPIOX_BASE(3)
-#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset))
-#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C)
-#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018)
-#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C)
-#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028)
-#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020)
-#define GPIO3_RISINGDETECT GPIO3_REG32(0x048)
-#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C)
-#define GPIO3_DATAIN GPIO3_REG32(0x038)
-#define GPIO3_OE GPIO3_REG32(0x034)
-#define GPIO3_DATAOUT GPIO3_REG32(0x03C)
-#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
-#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
-#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
-#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
-
-/* GPIO 4 */
-#define GPIO4_BASE GPIOX_BASE(4)
-#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset))
-#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C)
-#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018)
-#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C)
-#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028)
-#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020)
-#define GPIO4_RISINGDETECT GPIO4_REG32(0x048)
-#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C)
-#define GPIO4_DATAIN GPIO4_REG32(0x038)
-#define GPIO4_OE GPIO4_REG32(0x034)
-#define GPIO4_DATAOUT GPIO4_REG32(0x03C)
-#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050)
-#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054)
-
-#if defined(CONFIG_ARCH_OMAP2430)
-/* GPIO 5 */
-#define GPIO5_REG32(offset) __REG32((OMAP24XX_GPIO5_BASE + (offset)))
-#define GPIO5_IRQENABLE1 GPIO5_REG32(0x01C)
-#define GPIO5_IRQSTATUS1 GPIO5_REG32(0x018)
-#define GPIO5_IRQENABLE2 GPIO5_REG32(0x02C)
-#define GPIO5_IRQSTATUS2 GPIO5_REG32(0x028)
-#define GPIO5_WAKEUPENABLE GPIO5_REG32(0x020)
-#define GPIO5_RISINGDETECT GPIO5_REG32(0x048)
-#define GPIO5_FALLINGDETECT GPIO5_REG32(0x04C)
-#define GPIO5_DATAIN GPIO5_REG32(0x038)
-#define GPIO5_OE GPIO5_REG32(0x034)
-#define GPIO5_DATAOUT GPIO5_REG32(0x03C)
-#define GPIO5_DEBOUNCENABLE GPIO5_REG32(0x050)
-#define GPIO5_DEBOUNCINGTIME GPIO5_REG32(0x054)
-#endif
-
-/* IO CONFIG */
-#define CONTROL_REG32(offset) __REG32(CTRL_BASE + (offset))
-#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104)
-#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134)
-#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8)
-#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C)
-#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090)
-#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8)
-#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) /* 2420 */
-#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0)
-#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC)
-#define CONTROL_PADCONF_SYS_NIRQW0 CONTROL_REG32(0x0BC) /* 2430 */
-#define CONTROL_PADCONF_SSI1_FLAG_TX CONTROL_REG32(0x108) /* 2430 */
-
-/* CONTROL */
-#define CONTROL_DEVCONF CONTROL_REG32(0x274)
-#define CONTROL_DEVCONF1 CONTROL_REG32(0x2E8)
-
-/* INTERRUPT CONTROLLER */
-#define INTC_BASE ((L4_24XX_BASE) + 0xfe000)
-#define INTC_REG32(offset) __REG32(INTC_BASE + (offset))
-
-#define INTC1_U_BASE INTC_REG32(0x000)
-#define INTC_MIR0 INTC_REG32(0x084)
-#define INTC_MIR_SET0 INTC_REG32(0x08C)
-#define INTC_MIR_CLEAR0 INTC_REG32(0x088)
-#define INTC_ISR_CLEAR0 INTC_REG32(0x094)
-#define INTC_MIR1 INTC_REG32(0x0A4)
-#define INTC_MIR_SET1 INTC_REG32(0x0AC)
-#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8)
-#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4)
-#define INTC_MIR2 INTC_REG32(0x0C4)
-#define INTC_MIR_SET2 INTC_REG32(0x0CC)
-#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8)
-#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4)
-#define INTC_SIR_IRQ INTC_REG32(0x040)
-#define INTC_CONTROL INTC_REG32(0x048)
-#define INTC_ILR11 INTC_REG32(0x12C) /* PRCM on MPU PIC */
-#define INTC_ILR30 INTC_REG32(0x178)
-#define INTC_ILR31 INTC_REG32(0x17C)
-#define INTC_ILR32 INTC_REG32(0x180)
-#define INTC_ILR37 INTC_REG32(0x194) /* GPIO4 on MPU PIC */
-#define INTC_SYSCONFIG INTC_REG32(0x010) /* GPT1 on MPU PIC */
-
-/* RAM FIREWALL */
-#define RAMFW_BASE (0x68005000)
-#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset))
-
-#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048)
-#define RAMFW_READPERM0 RAMFW_REG32(0x050)
-#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058)
-
-/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
-//#define DEBUG_BOARD_LED_REGISTER 0x04000014
-
-/* GPMC CS0 */
-#define GPMC_CONFIG1_0 GPMC_REG32(0x060)
-#define GPMC_CONFIG2_0 GPMC_REG32(0x064)
-#define GPMC_CONFIG3_0 GPMC_REG32(0x068)
-#define GPMC_CONFIG4_0 GPMC_REG32(0x06C)
-#define GPMC_CONFIG5_0 GPMC_REG32(0x070)
-#define GPMC_CONFIG6_0 GPMC_REG32(0x074)
-#define GPMC_CONFIG7_0 GPMC_REG32(0x078)
-
-/* GPMC CS1 */
-#define GPMC_CONFIG1_1 GPMC_REG32(0x090)
-#define GPMC_CONFIG2_1 GPMC_REG32(0x094)
-#define GPMC_CONFIG3_1 GPMC_REG32(0x098)
-#define GPMC_CONFIG4_1 GPMC_REG32(0x09C)
-#define GPMC_CONFIG5_1 GPMC_REG32(0x0a0)
-#define GPMC_CONFIG6_1 GPMC_REG32(0x0a4)
-#define GPMC_CONFIG7_1 GPMC_REG32(0x0a8)
-
-/* GPMC CS3 */
-#define GPMC_CONFIG1_3 GPMC_REG32(0x0F0)
-#define GPMC_CONFIG2_3 GPMC_REG32(0x0F4)
-#define GPMC_CONFIG3_3 GPMC_REG32(0x0F8)
-#define GPMC_CONFIG4_3 GPMC_REG32(0x0FC)
-#define GPMC_CONFIG5_3 GPMC_REG32(0x100)
-#define GPMC_CONFIG6_3 GPMC_REG32(0x104)
-#define GPMC_CONFIG7_3 GPMC_REG32(0x108)
-
-/* DSS */
-#define DSS_CONTROL DISP_REG32(0x040)
-#define DISPC_CONTROL DISP_REG32(0x440)
-#define DISPC_SYSSTATUS DISP_REG32(0x414)
-#define DISPC_IRQSTATUS DISP_REG32(0x418)
-#define DISPC_IRQENABLE DISP_REG32(0x41C)
-#define DISPC_CONFIG DISP_REG32(0x444)
-#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C)
-#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450)
-#define DISPC_TRANS_COLOR0 DISP_REG32(0x454)
-#define DISPC_TRANS_COLOR1 DISP_REG32(0x458)
-#define DISPC_LINE_NUMBER DISP_REG32(0x460)
-#define DISPC_TIMING_H DISP_REG32(0x464)
-#define DISPC_TIMING_V DISP_REG32(0x468)
-#define DISPC_POL_FREQ DISP_REG32(0x46C)
-#define DISPC_DIVISOR DISP_REG32(0x470)
-#define DISPC_SIZE_DIG DISP_REG32(0x478)
-#define DISPC_SIZE_LCD DISP_REG32(0x47C)
-#define DISPC_GFX_BA0 DISP_REG32(0x480)
-#define DISPC_GFX_BA1 DISP_REG32(0x484)
-#define DISPC_GFX_POSITION DISP_REG32(0x488)
-#define DISPC_GFX_SIZE DISP_REG32(0x48C)
-#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0)
-#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4)
-#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC)
-#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0)
-#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4)
-#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8)
-#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4)
-#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8)
-#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC)
-
-/* HSUSB Suspend */
-#define HSUSB_CTRL __REG8(0x480AC001)
-#define USBOTG_POWER __REG32(0x480AC000)
-
-/* HS MMC */
-#define MMCHS1_SYSCONFIG __REG32(0x4809C010)
-#define MMCHS2_SYSCONFIG __REG32(0x480b4010)
-
-#endif /* __ASSEMBLER__ */
-
-#endif
-
-
-
-
-
--
next prev parent reply other threads:[~2007-05-17 0:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-17 0:11 [PATCH 00/18] PRCM cleanup - remove prcm-regs.h Paul Walmsley
2007-05-17 0:11 ` [PATCH 01/18] omap2: add OMAP24XX and OMAP2/3 modules to prcm_common.h Paul Walmsley
2007-05-17 0:11 ` [PATCH 02/18] omap2: add OMAP24XX register bit defines shared between CM and PRM Paul Walmsley
2007-05-17 0:11 ` [PATCH 03/18] omap2: add OMAP24XX Clock Management register defines Paul Walmsley
2007-05-17 0:11 ` [PATCH 04/18] omap2: add Clock Management shared register bit defines to cm.h Paul Walmsley
2007-05-17 0:11 ` [PATCH 05/18] omap2: add OMAP24XX Power/Reset Management register defines Paul Walmsley
2007-05-17 0:11 ` [PATCH 06/18] omap2: add Power/Reset Management shared register bit defines to prm.h Paul Walmsley
2007-05-17 0:11 ` [PATCH 07/18] omap2: add OMAP24XX Clock Management register bit defines Paul Walmsley
2007-05-17 0:11 ` [PATCH 08/18] omap2: add OMAP24XX Power/Reset " Paul Walmsley
2007-05-17 0:11 ` [PATCH 09/18] omap2: add PRM_BASE/CM_BASE #defines Paul Walmsley
2007-05-17 0:11 ` [PATCH 10/18] omap2: convert pm.c to use new PRCM functions and symbolic constants Paul Walmsley
2007-05-17 0:11 ` [PATCH 11/18] omap2: convert clock.c " Paul Walmsley
2007-05-17 0:11 ` [PATCH 12/18] omap2: convert prcm.c to use symbolic register & register bit constants Paul Walmsley
2007-05-17 0:11 ` [PATCH 13/18] omap2: convert sram-fn.S to use {PRM, CM}_BASE rather than PRCM_BASE Paul Walmsley
2007-05-17 0:11 ` [PATCH 14/18] omap2: convert clock.h to use symbolic register defines Paul Walmsley
2007-05-17 0:11 ` [PATCH 15/18] omap2: convert clock.h to use symbolic register bit defines Paul Walmsley
2007-05-17 0:11 ` [PATCH 16/18] omap2: convert DSP code to use new PRCM functions & defines Paul Walmsley
2007-05-25 21:32 ` Khem Raj
2007-05-17 0:11 ` [PATCH 17/18] omap2: remove remaining prcm-regs.h includes Paul Walmsley
2007-05-17 0:11 ` Paul Walmsley [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-05-25 8:23 [PATCH 00/18] PRCM cleanup - remove prcm-regs.h Paul Walmsley
2007-05-25 8:23 ` [PATCH 18/18] omap2: " Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070517005444.865670691@pwsan.com \
--to=paul@pwsan.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox