Re: musb CaMeLcAsEnOmOre (was: (no subject))

[David Brownell <david-b@pacbell.net>]

On Monday 13 August 2007, Tony Lindgren wrote:
> As the musb/tusb code now mostly works for host and peripheral,
> I'm planning to push a series of search and replace patches
> to start converting the musb/tusb driver into something that
> follows CodingStyle.

This is pretty much for *variables* now not types, yes?

I thought the types were mostly changed already.  And some of
the variables (and struct members) but not all.

Sounds OK to me.


> Following is a list of changes I've done. I haven't gone through
> DaVinci or 2430 specific code, as I cannot test them right now.
> No functional changes should be included. Code has been tested
> with tusb6010.
> 
> Regards,
> 
> Tony
> 
> [PATCH 1/52] musb_hdrc: Search and replace pThis with musb
> [PATCH 2/52] musb_hdrc: Search and replace pEndPt with hw_ep
> [PATCH 3/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_ep
> [PATCH 4/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_hw_ep
> [PATCH 5/52] musb_hdrc: Search and replace pRegs with mregs
> [PATCH 6/52] musb_hdrc: Search and replace pBase with mbase
> [PATCH 7/52] musb_hdrc: Search and replace pSource with src
> [PATCH 8/52] musb_hdrc: Search and replace pDest with dst
> [PATCH 9/52] musb_hdrc: Search and replace dwCount with len
> [PATCH 10/52] musb_hdrc: Search and replace wFifoCount with fifo_count
> [PATCH 11/52] musb_hdrc: Search and replace wCount with len
> [PATCH 12/52] musb_hdrc: Search and replace bLocalEnd with epnum
> [PATCH 13/52] musb_hdrc: Search and replace aLocalEnd with endpoints
> [PATCH 14/52] musb_hdrc: Search and replace bEndCount with nr_endpoints
> [PATCH 15/52] musb_hdrc: Search and replace bEndNumber with current_epnum
> [PATCH 16/52] musb_hdrc: Search and replace bEnd0Stage with ep0_stage
> [PATCH 17/52] musb_hdrc: Search and replace bEnd with epnum
> [PATCH 18/52] musb_hdrc: Search and replace Lock with lock
> [PATCH 19/52] musb_hdrc: Search and replace MGC_SelectEnd with musb_ep_select
> [PATCH 20/52] musb_hdrc: Search and replace _pthis with _musb
> [PATCH 21/52] musb_hdrc: Search and replace bIsHost with is_host
> [PATCH 22/52] musb_hdrc: Get rid of old unused MUSB_EpFifoDescriptor
> [PATCH 23/52] musb_hdrc: Search and replace bIsSharedFifo with is_shared_fifo
> [PATCH 24/52] musb_hdrc: Search and replace wMaxPacketSizeTx with max_packet_sz_tx
> [PATCH 25/52] musb_hdrc: Search and replace wMaxPacketSizeRx with max_packet_sz_rx
> [PATCH 26/52] musb_hdrc: Search and replace pDmaController with dma_controller
> [PATCH 27/52] musb_hdrc: Search and replace bIsMultipoint with is_multipoint
> [PATCH 28/52] musb_hdrc: Search and replace bIgnoreDisconnect with ignore_disconnect
> [PATCH 29/52] musb_hdrc: Search and replace bBulkSplit with bulk_split
> [PATCH 30/52] musb_hdrc: Search and replace bBulkCombine with bulk_combine
> [PATCH 31/52] musb_hdrc: Search and replace bAddress with address
> [PATCH 32/52] musb_hdrc: Search and replace bTestModeValue with test_mode_nr
> [PATCH 33/52] musb_hdrc: Search and replace bTestMode with test_mode
> [PATCH 34/52] musb_hdrc: Search and replace pGadgetDriver with gadget_driver
> [PATCH 35/52] musb_hdrc: Search and replace bDelayPortPowerOff with delay_port_power_off
> [PATCH 36/52] musb_hdrc: Search and replace pProcEntry with proc_entry
> [PATCH 37/52] musb_hdrc: Search and replace pPrivateData with private_data
> [PATCH 38/52] musb_hdrc: Search and replace dwMaxLength with max_len
> [PATCH 39/52] musb_hdrc: Search and replace dwActualLength with actual_len
> [PATCH 40/52] musb_hdrc: Search and replace bStatus with status
> [PATCH 41/52] musb_hdrc: Search and replace bDesiredMode with desired_mode
> [PATCH 42/52] musb_hdrc: Search and replace bMode with mode
> [PATCH 43/52] musb_hdrc: Search and replace MGC_pfDmaProgramChannel with dma_program_channel
> [PATCH 44/52] musb_hdrc: Search and replace pControlRequest with ctrlrequest
> [PATCH 45/52] musb_hdrc: Search and replace bResult with result
> [PATCH 46/52] musb_hdrc: Search and replace bSetAddress with set_address
> [PATCH 47/52] musb_hdrc: Search and replace bRecip with recip
> [PATCH 48/52] musb_hdrc: Search and replace pRequest with request
> [PATCH 49/52] musb_hdrc: Search and replace wCsrVal with csr
> [PATCH 50/52] musb_hdrc: Search and replace bTx with tx
> [PATCH 51/52] musb_hdrc: Search and replace wPacketSize with packet_sz
> [PATCH 52/52] musb_hdrc: Search and replace channelNum with chnum
> _______________________________________________