From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [patch 2.6.23-rc2-omap1] remove useless/wrong P20_24XX_TSC_IRQ mux Date: Wed, 15 Aug 2007 03:54:59 -0700 Message-ID: <20070815105458.GJ19754@atomide.com> References: <200708132247.13166.david-b@pacbell.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <200708132247.13166.david-b@pacbell.net> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces+gplao-linux-omap-open-source=gmane.org@linux.omap.com Errors-To: linux-omap-open-source-bounces+gplao-linux-omap-open-source=gmane.org@linux.omap.com To: David Brownell Cc: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org * David Brownell [070813 23:12]: > Remove bogus TSC_IRQ pinmux; it's not used, there's no pin > dedicated for touchscreen (or other TSC chip) purposes, and > this doesn't even look right for P20 (0x10b not 0x108, plus > an IRQ would need to be a GPIO i.e. mux 3 not mux 0). > > Signed-off-by: David Brownell > > --- h4.orig/arch/arm/mach-omap2/mux.c 2007-08-13 12:31:32.000000000 -0700 > +++ h4/arch/arm/mach-omap2/mux.c 2007-08-13 12:32:12.000000000 -0700 > @@ -106,9 +106,6 @@ MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, > MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1) > MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1) > > -/* TSC IRQ */ > -MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1) > - > /* UART3 */ > MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1) > MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1) > --- h4.orig/include/asm-arm/arch-omap/mux.h 2007-08-13 12:31:32.000000000 -0700 > +++ h4/include/asm-arm/arch-omap/mux.h 2007-08-13 12:32:12.000000000 -0700 > @@ -498,8 +498,6 @@ enum omap24xx_index { > D3_242X_DMAREQ4, > E3_242X_DMAREQ5, > > - P20_24XX_TSC_IRQ, > - > /* UART3 */ > K15_24XX_UART3_TX, > K14_24XX_UART3_RX, Pushing today. Tony