[PATCH 8/8] musb_hdrc: Tabify and clean-up musbhdrc.h

Tony Lindgren
2007-08-15T14:21:45Z

Tabify and clean-up musbhdrc.h

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/usb/musb/musbhdrc.h | 347 ++++++++++++++++++++----------------------
1 files changed, 165 insertions(+), 182 deletions(-)

diff --git a/drivers/usb/musb/musbhdrc.h b/drivers/usb/musb/musbhdrc.h
index 4a84c2a..ec2a1af 100644
--- a/drivers/usb/musb/musbhdrc.h
+++ b/drivers/usb/musb/musbhdrc.h
@@ -1,4 +1,4 @@
-/******************************************************************
+/*
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
*
@@ -29,35 +29,29 @@
* NON-INFRINGEMENT. MENTOR GRAPHICS DOES NOT PROVIDE SUPPORT
* SERVICES OR UPDATES FOR THIS DRIVER, EVEN IF YOU ARE A MENTOR
* GRAPHICS SUPPORT CUSTOMER.
- ******************************************************************/
+ */

#ifndef __MUSB_HDRC_DEFS_H__
#define __MUSB_HDRC_DEFS_H__

-/*
- * HDRC-specific definitions
- */
-
-#define MUSB_EP0_FIFOSIZE 64 /* this is non-configurable */
+#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */

/*
- * MUSBMHDRC Register map
+ * Common USB registers
*/

-/* Common USB registers */
-
-#define MUSB_FADDR 0x00 /* 8-bit */
-#define MUSB_POWER 0x01 /* 8-bit */
+#define MUSB_FADDR 0x00 /* 8-bit */
+#define MUSB_POWER 0x01 /* 8-bit */

-#define MUSB_INTRTX 0x02 /* 16-bit */
-#define MUSB_INTRRX 0x04
-#define MUSB_INTRTXE 0x06
-#define MUSB_INTRRXE 0x08
-#define MUSB_INTRUSB 0x0A /* 8 bit */
-#define MUSB_INTRUSBE 0x0B /* 8 bit */
-#define MUSB_FRAME 0x0C
-#define MUSB_INDEX 0x0E /* 8 bit */
-#define MUSB_TESTMODE 0x0F /* 8 bit */
+#define MUSB_INTRTX 0x02 /* 16-bit */
+#define MUSB_INTRRX 0x04
+#define MUSB_INTRTXE 0x06
+#define MUSB_INTRRXE 0x08
+#define MUSB_INTRUSB 0x0A /* 8 bit */
+#define MUSB_INTRUSBE 0x0B /* 8 bit */
+#define MUSB_FRAME 0x0C
+#define MUSB_INDEX 0x0E /* 8 bit */
+#define MUSB_TESTMODE 0x0F /* 8 bit */

/* Get offset for a given FIFO from musb->mregs */
#ifdef CONFIG_USB_TUSB6010
@@ -66,49 +60,51 @@
#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
#endif

-/* Additional Control Registers */
+/*
+ * Additional Control Registers
+ */

-#define MUSB_DEVCTL 0x60 /* 8 bit */
+#define MUSB_DEVCTL 0x60 /* 8 bit */

/* These are always controlled through the INDEX register */
-#define MUSB_TXFIFOSZ 0x62 /* 8-bit (see masks) */
-#define MUSB_RXFIFOSZ 0x63 /* 8-bit (see masks) */
-#define MUSB_TXFIFOADD 0x64 /* 16-bit offset shifted right 3 */
-#define MUSB_RXFIFOADD 0x66 /* 16-bit offset shifted right 3 */
-
-// vctrl/vstatus: optional vendor utmi+phy register at 0x68
-#define MUSB_HWVERS 0x6C /* 8 bit */
-
-#define MUSB_EPINFO 0x78 /* 8 bit */
-#define MUSB_RAMINFO 0x79 /* 8 bit */
-#define MUSB_LINKINFO 0x7a /* 8 bit */
-#define MUSB_VPLEN 0x7b /* 8 bit */
-#define MUSB_HS_EOF1 0x7c /* 8 bit */
-#define MUSB_FS_EOF1 0x7d /* 8 bit */
-#define MUSB_LS_EOF1 0x7e /* 8 bit */
-
-/* offsets to endpoint registers */
-#define MUSB_TXMAXP 0x00
-#define MUSB_TXCSR 0x02
-#define MUSB_CSR0 MUSB_TXCSR /* re-used for EP0 */
-#define MUSB_RXMAXP 0x04
-#define MUSB_RXCSR 0x06
-#define MUSB_RXCOUNT 0x08
-#define MUSB_COUNT0 MUSB_RXCOUNT /* re-used for EP0 */
-#define MUSB_TXTYPE 0x0A
-#define MUSB_TYPE0 MUSB_TXTYPE /* re-used for EP0 */
-#define MUSB_TXINTERVAL 0x0B
-#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* re-used for EP0 */
-#define MUSB_RXTYPE 0x0C
-#define MUSB_RXINTERVAL 0x0D
-#define MUSB_FIFOSIZE 0x0F
-#define MUSB_CONFIGDATA MUSB_FIFOSIZE /* re-used for EP0 */
-
-/* offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_TXFIFOSZ 0x62 /* 8-bit (see masks) */
+#define MUSB_RXFIFOSZ 0x63 /* 8-bit (see masks) */
+#define MUSB_TXFIFOADD 0x64 /* 16-bit offset shifted right 3 */
+#define MUSB_RXFIFOADD 0x66 /* 16-bit offset shifted right 3 */
+
+/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
+#define MUSB_HWVERS 0x6C /* 8 bit */
+
+#define MUSB_EPINFO 0x78 /* 8 bit */
+#define MUSB_RAMINFO 0x79 /* 8 bit */
+#define MUSB_LINKINFO 0x7a /* 8 bit */
+#define MUSB_VPLEN 0x7b /* 8 bit */
+#define MUSB_HS_EOF1 0x7c /* 8 bit */
+#define MUSB_FS_EOF1 0x7d /* 8 bit */
+#define MUSB_LS_EOF1 0x7e /* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP 0x00
+#define MUSB_TXCSR 0x02
+#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
+#define MUSB_RXMAXP 0x04
+#define MUSB_RXCSR 0x06
+#define MUSB_RXCOUNT 0x08
+#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
+#define MUSB_TXTYPE 0x0A
+#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
+#define MUSB_TXINTERVAL 0x0B
+#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
+#define MUSB_RXTYPE 0x0C
+#define MUSB_RXINTERVAL 0x0D
+#define MUSB_FIFOSIZE 0x0F
+#define MUSB_CONFIGDATA MUSB_FIFOSIZE /* Re-used for EP0 */
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
- (0x10 + (_offset))
+ (0x10 + (_offset))

-/* offsets to endpoint registers in flat models */
+/* Offsets to endpoint registers in flat models */
#define MUSB_FLAT_OFFSET(_epnum, _offset) \
(0x100 + (0x10*(_epnum)) + (_offset))

@@ -116,96 +112,94 @@
/* TUSB6010 EP0 configuration register is special */
#define MUSB_TUSB_OFFSET(_epnum, _offset) \
(0x10 + _offset)
-#include "tusb6010.h" /* needed "only" for TUSB_EP0_CONF */
+#include "tusb6010.h" /* Needed "only" for TUSB_EP0_CONF */
#endif

/* "bus control"/target registers, for host side multipoint (external hubs) */
-#define MUSB_TXFUNCADDR 0x00
-#define MUSB_TXHUBADDR 0x02
-#define MUSB_TXHUBPORT 0x03
+#define MUSB_TXFUNCADDR 0x00
+#define MUSB_TXHUBADDR 0x02
+#define MUSB_TXHUBPORT 0x03

-#define MUSB_RXFUNCADDR 0x04
-#define MUSB_RXHUBADDR 0x06
-#define MUSB_RXHUBPORT 0x07
+#define MUSB_RXFUNCADDR 0x04
+#define MUSB_RXHUBADDR 0x06
+#define MUSB_RXHUBPORT 0x07

#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
(0x80 + (8*(_epnum)) + (_offset))

/*
- * MUSBHDRC Register bit masks
+ * MUSB Register bits
*/

/* POWER */
-
-#define MUSB_POWER_ISOUPDATE 0x80
-#define MUSB_POWER_SOFTCONN 0x40
+#define MUSB_POWER_ISOUPDATE 0x80
+#define MUSB_POWER_SOFTCONN 0x40
#define MUSB_POWER_HSENAB 0x20
#define MUSB_POWER_HSMODE 0x10
-#define MUSB_POWER_RESET 0x08
-#define MUSB_POWER_RESUME 0x04
-#define MUSB_POWER_SUSPENDM 0x02
-#define MUSB_POWER_ENSUSPEND 0x01
+#define MUSB_POWER_RESET 0x08
+#define MUSB_POWER_RESUME 0x04
+#define MUSB_POWER_SUSPENDM 0x02
+#define MUSB_POWER_ENSUSPEND 0x01

/* INTRUSB */
-#define MUSB_INTR_SUSPEND 0x01
-#define MUSB_INTR_RESUME 0x02
-#define MUSB_INTR_RESET 0x04
-#define MUSB_INTR_BABBLE 0x04
-#define MUSB_INTR_SOF 0x08
-#define MUSB_INTR_CONNECT 0x10
-#define MUSB_INTR_DISCONNECT 0x20
-#define MUSB_INTR_SESSREQ 0x40
-#define MUSB_INTR_VBUSERROR 0x80 /* FOR SESSION END */
+#define MUSB_INTR_SUSPEND 0x01
+#define MUSB_INTR_RESUME 0x02
+#define MUSB_INTR_RESET 0x04
+#define MUSB_INTR_BABBLE 0x04
+#define MUSB_INTR_SOF 0x08
+#define MUSB_INTR_CONNECT 0x10
+#define MUSB_INTR_DISCONNECT 0x20
+#define MUSB_INTR_SESSREQ 0x40
+#define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */

/* DEVCTL */
-#define MUSB_DEVCTL_BDEVICE 0x80
-#define MUSB_DEVCTL_FSDEV 0x40
-#define MUSB_DEVCTL_LSDEV 0x20
-#define MUSB_DEVCTL_VBUS 0x18
+#define MUSB_DEVCTL_BDEVICE 0x80
+#define MUSB_DEVCTL_FSDEV 0x40
+#define MUSB_DEVCTL_LSDEV 0x20
+#define MUSB_DEVCTL_VBUS 0x18
#define MUSB_DEVCTL_VBUS_SHIFT 3
-#define MUSB_DEVCTL_HM 0x04
-#define MUSB_DEVCTL_HR 0x02
-#define MUSB_DEVCTL_SESSION 0x01
+#define MUSB_DEVCTL_HM 0x04
+#define MUSB_DEVCTL_HR 0x02
+#define MUSB_DEVCTL_SESSION 0x01

/* TESTMODE */
-
-#define MUSB_TEST_FORCE_HOST 0x80
-#define MUSB_TEST_FIFO_ACCESS 0x40
-#define MUSB_TEST_FORCE_FS 0x20
-#define MUSB_TEST_FORCE_HS 0x10
-#define MUSB_TEST_PACKET 0x08
-#define MUSB_TEST_K 0x04
-#define MUSB_TEST_J 0x02
-#define MUSB_TEST_SE0_NAK 0x01
-
-/* allocate for double-packet buffering (effectively doubles assigned _SIZE) */
+#define MUSB_TEST_FORCE_HOST 0x80
+#define MUSB_TEST_FIFO_ACCESS 0x40
+#define MUSB_TEST_FORCE_FS 0x20
+#define MUSB_TEST_FORCE_HS 0x10
+#define MUSB_TEST_PACKET 0x08
+#define MUSB_TEST_K 0x04
+#define MUSB_TEST_J 0x02
+#define MUSB_TEST_SE0_NAK 0x01
+
+/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
#define MUSB_FIFOSZ_DPB 0x10
-/* allocation size (8, 16, 32, ... 4096) */
+/* Allocation size (8, 16, 32, ... 4096) */
#define MUSB_FIFOSZ_SIZE 0x0f

/* CSR0 */
-#define MUSB_CSR0_FLUSHFIFO 0x0100
-#define MUSB_CSR0_TXPKTRDY 0x0002
-#define MUSB_CSR0_RXPKTRDY 0x0001
+#define MUSB_CSR0_FLUSHFIFO 0x0100
+#define MUSB_CSR0_TXPKTRDY 0x0002
+#define MUSB_CSR0_RXPKTRDY 0x0001

/* CSR0 in Peripheral mode */
-#define MUSB_CSR0_P_SVDSETUPEND 0x0080
-#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
-#define MUSB_CSR0_P_SENDSTALL 0x0020
-#define MUSB_CSR0_P_SETUPEND 0x0010
-#define MUSB_CSR0_P_DATAEND 0x0008
-#define MUSB_CSR0_P_SENTSTALL 0x0004
+#define MUSB_CSR0_P_SVDSETUPEND 0x0080
+#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
+#define MUSB_CSR0_P_SENDSTALL 0x0020
+#define MUSB_CSR0_P_SETUPEND 0x0010
+#define MUSB_CSR0_P_DATAEND 0x0008
+#define MUSB_CSR0_P_SENTSTALL 0x0004

/* CSR0 in Host mode */
-#define MUSB_CSR0_H_DIS_PING 0x0800
-#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* set to allow setting: */
-#define MUSB_CSR0_H_DATATOGGLE 0x0200 /* data toggle control */
-#define MUSB_CSR0_H_NAKTIMEOUT 0x0080
-#define MUSB_CSR0_H_STATUSPKT 0x0040
-#define MUSB_CSR0_H_REQPKT 0x0020
-#define MUSB_CSR0_H_ERROR 0x0010
-#define MUSB_CSR0_H_SETUPPKT 0x0008
-#define MUSB_CSR0_H_RXSTALL 0x0004
+#define MUSB_CSR0_H_DIS_PING 0x0800
+#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */
+#define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */
+#define MUSB_CSR0_H_NAKTIMEOUT 0x0080
+#define MUSB_CSR0_H_STATUSPKT 0x0040
+#define MUSB_CSR0_H_REQPKT 0x0020
+#define MUSB_CSR0_H_ERROR 0x0010
+#define MUSB_CSR0_H_SETUPPKT 0x0008
+#define MUSB_CSR0_H_RXSTALL 0x0004

/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
#define MUSB_CSR0_P_WZC_BITS \
@@ -214,52 +208,47 @@
( MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
| MUSB_CSR0_RXPKTRDY )

-
/* TxType/RxType */
-#define MUSB_TYPE_SPEED 0xc0
+#define MUSB_TYPE_SPEED 0xc0
#define MUSB_TYPE_SPEED_SHIFT 6
-#define MUSB_TYPE_PROTO 0x30 /* implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
#define MUSB_TYPE_PROTO_SHIFT 4
-#define MUSB_TYPE_REMOTE_END 0xf /* implicitly zero for ep0 */
+#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */

/* CONFIGDATA */
-
-#define MUSB_CONFIGDATA_MPRXE 0x80 /* auto bulk pkt combining */
-#define MUSB_CONFIGDATA_MPTXE 0x40 /* auto bulk pkt splitting */
-#define MUSB_CONFIGDATA_BIGENDIAN 0x20
-#define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
-#define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
-#define MUSB_CONFIGDATA_DYNFIFO 0x04 /* dynamic FIFO sizing */
-#define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
-#define MUSB_CONFIGDATA_UTMIDW 0x01 /* data width 0/1 => 8/16bits */
+#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
+#define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */
+#define MUSB_CONFIGDATA_BIGENDIAN 0x20
+#define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
+#define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
+#define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */
+#define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
+#define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */

/* TXCSR in Peripheral and Host mode */
-
-#define MUSB_TXCSR_AUTOSET 0x8000
-#define MUSB_TXCSR_MODE 0x2000
-#define MUSB_TXCSR_DMAENAB 0x1000
-#define MUSB_TXCSR_FRCDATATOG 0x0800
-#define MUSB_TXCSR_DMAMODE 0x0400
-#define MUSB_TXCSR_CLRDATATOG 0x0040
-#define MUSB_TXCSR_FLUSHFIFO 0x0008
-#define MUSB_TXCSR_FIFONOTEMPTY 0x0002
-#define MUSB_TXCSR_TXPKTRDY 0x0001
+#define MUSB_TXCSR_AUTOSET 0x8000
+#define MUSB_TXCSR_MODE 0x2000
+#define MUSB_TXCSR_DMAENAB 0x1000
+#define MUSB_TXCSR_FRCDATATOG 0x0800
+#define MUSB_TXCSR_DMAMODE 0x0400
+#define MUSB_TXCSR_CLRDATATOG 0x0040
+#define MUSB_TXCSR_FLUSHFIFO 0x0008
+#define MUSB_TXCSR_FIFONOTEMPTY 0x0002
+#define MUSB_TXCSR_TXPKTRDY 0x0001

/* TXCSR in Peripheral mode */
-
-#define MUSB_TXCSR_P_ISO 0x4000
-#define MUSB_TXCSR_P_INCOMPTX 0x0080
-#define MUSB_TXCSR_P_SENTSTALL 0x0020
-#define MUSB_TXCSR_P_SENDSTALL 0x0010
-#define MUSB_TXCSR_P_UNDERRUN 0x0004
+#define MUSB_TXCSR_P_ISO 0x4000
+#define MUSB_TXCSR_P_INCOMPTX 0x0080
+#define MUSB_TXCSR_P_SENTSTALL 0x0020
+#define MUSB_TXCSR_P_SENDSTALL 0x0010
+#define MUSB_TXCSR_P_UNDERRUN 0x0004

/* TXCSR in Host mode */
-
-#define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200
-#define MUSB_TXCSR_H_DATATOGGLE 0x0100
-#define MUSB_TXCSR_H_NAKTIMEOUT 0x0080
-#define MUSB_TXCSR_H_RXSTALL 0x0020
-#define MUSB_TXCSR_H_ERROR 0x0004
+#define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200
+#define MUSB_TXCSR_H_DATATOGGLE 0x0100
+#define MUSB_TXCSR_H_NAKTIMEOUT 0x0080
+#define MUSB_TXCSR_H_RXSTALL 0x0020
+#define MUSB_TXCSR_H_ERROR 0x0004

/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
#define MUSB_TXCSR_P_WZC_BITS \
@@ -269,36 +258,32 @@
( MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY )

-
/* RXCSR in Peripheral and Host mode */
-
-#define MUSB_RXCSR_AUTOCLEAR 0x8000
-#define MUSB_RXCSR_DMAENAB 0x2000
-#define MUSB_RXCSR_DISNYET 0x1000
-#define MUSB_RXCSR_PID_ERR 0x1000
-#define MUSB_RXCSR_DMAMODE 0x0800
-#define MUSB_RXCSR_INCOMPRX 0x0100
-#define MUSB_RXCSR_CLRDATATOG 0x0080
-#define MUSB_RXCSR_FLUSHFIFO 0x0010
-#define MUSB_RXCSR_DATAERROR 0x0008
-#define MUSB_RXCSR_FIFOFULL 0x0002
-#define MUSB_RXCSR_RXPKTRDY 0x0001
+#define MUSB_RXCSR_AUTOCLEAR 0x8000
+#define MUSB_RXCSR_DMAENAB 0x2000
+#define MUSB_RXCSR_DISNYET 0x1000
+#define MUSB_RXCSR_PID_ERR 0x1000
+#define MUSB_RXCSR_DMAMODE 0x0800
+#define MUSB_RXCSR_INCOMPRX 0x0100
+#define MUSB_RXCSR_CLRDATATOG 0x0080
+#define MUSB_RXCSR_FLUSHFIFO 0x0010
+#define MUSB_RXCSR_DATAERROR 0x0008
+#define MUSB_RXCSR_FIFOFULL 0x0002
+#define MUSB_RXCSR_RXPKTRDY 0x0001

/* RXCSR in Peripheral mode */
-
-#define MUSB_RXCSR_P_ISO 0x4000
-#define MUSB_RXCSR_P_SENTSTALL 0x0040
-#define MUSB_RXCSR_P_SENDSTALL 0x0020
-#define MUSB_RXCSR_P_OVERRUN 0x0004
+#define MUSB_RXCSR_P_ISO 0x4000
+#define MUSB_RXCSR_P_SENTSTALL 0x0040
+#define MUSB_RXCSR_P_SENDSTALL 0x0020
+#define MUSB_RXCSR_P_OVERRUN 0x0004

/* RXCSR in Host mode */
-
-#define MUSB_RXCSR_H_AUTOREQ 0x4000
-#define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400
-#define MUSB_RXCSR_H_DATATOGGLE 0x0200
-#define MUSB_RXCSR_H_RXSTALL 0x0040
-#define MUSB_RXCSR_H_REQPKT 0x0020
-#define MUSB_RXCSR_H_ERROR 0x0004
+#define MUSB_RXCSR_H_AUTOREQ 0x4000
+#define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400
+#define MUSB_RXCSR_H_DATATOGGLE 0x0200
+#define MUSB_RXCSR_H_RXSTALL 0x0040
+#define MUSB_RXCSR_H_REQPKT 0x0020
+#define MUSB_RXCSR_H_ERROR 0x0004

/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
#define MUSB_RXCSR_P_WZC_BITS \
@@ -308,9 +293,7 @@
( MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY )

-
/* HUBADDR */
#define MUSB_HUBADDR_MULTI_TT 0x80

-
#endif /* __MUSB_HDRC_DEFS_H__ */
--
1.5.2.3