* [PATCH] ARM: OMAP: GPIO IRQSTATUS2 workaround applies to 2430
@ 2007-10-04 0:48 Kevin Hilman
2007-10-09 22:20 ` Tony Lindgren
0 siblings, 1 reply; 2+ messages in thread
From: Kevin Hilman @ 2007-10-04 0:48 UTC (permalink / raw)
To: linux-omap-open-source
The workaround to clear both sides of GPIO IRQ applies to 2430 as well
as 2420. Use cpu_is_omap24xx() instead of cpu_is_omap2420()
Signed-off-by: Kevin Hilman <khilman@mvista.com>
---
arch/arm/plat-omap/gpio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: dev/arch/arm/plat-omap/gpio.c
===================================================================
--- dev.orig/arch/arm/plat-omap/gpio.c
+++ dev/arch/arm/plat-omap/gpio.c
@@ -709,7 +709,7 @@ static void _clear_gpio_irqbank(struct g
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- if (cpu_is_omap2420() || cpu_is_omap34xx())
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
__raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
#endif
}
--
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: OMAP: GPIO IRQSTATUS2 workaround applies to 2430
2007-10-04 0:48 [PATCH] ARM: OMAP: GPIO IRQSTATUS2 workaround applies to 2430 Kevin Hilman
@ 2007-10-09 22:20 ` Tony Lindgren
0 siblings, 0 replies; 2+ messages in thread
From: Tony Lindgren @ 2007-10-09 22:20 UTC (permalink / raw)
To: Kevin Hilman; +Cc: linux-omap-open-source
* Kevin Hilman <khilman@mvista.com> [071003 17:49]:
> The workaround to clear both sides of GPIO IRQ applies to 2430 as well
> as 2420. Use cpu_is_omap24xx() instead of cpu_is_omap2420()
>
> Signed-off-by: Kevin Hilman <khilman@mvista.com>
>
> ---
> arch/arm/plat-omap/gpio.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Index: dev/arch/arm/plat-omap/gpio.c
> ===================================================================
> --- dev.orig/arch/arm/plat-omap/gpio.c
> +++ dev/arch/arm/plat-omap/gpio.c
> @@ -709,7 +709,7 @@ static void _clear_gpio_irqbank(struct g
>
> /* Workaround for clearing DSP GPIO interrupts to allow retention */
> #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
> - if (cpu_is_omap2420() || cpu_is_omap34xx())
> + if (cpu_is_omap24xx() || cpu_is_omap34xx())
> __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
> #endif
> }
Pushing today.
Tony
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-10-09 22:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-04 0:48 [PATCH] ARM: OMAP: GPIO IRQSTATUS2 workaround applies to 2430 Kevin Hilman
2007-10-09 22:20 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox