From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH] Make dyntick work again Date: Fri, 12 Oct 2007 13:07:32 -0700 Message-ID: <20071012200732.GF7979@atomide.com> References: <20071011203240.GL503@atomide.com> <002c01c80c74$9f0f5160$e1ac580a@swcenter.sec.samsung.co.kr> <470F8913.8070308@googlemail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <470F8913.8070308@googlemail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: Dirk Behme Cc: linux-omap-open-source@linux.omap.com, kmpark@infradead.org List-Id: linux-omap@vger.kernel.org * Dirk Behme [071012 07:48]: > Kyungmin Park wrote: >> Umm, there's a problem, I can't boot with timer32k. >> It halts at here. > > On OMAP 5912 OSK I get: > >> <7>Calibrating delay loop... 1.05 BogoMIPS (lpj=4096) >> Mount-cache hash table entries: 512 >> <6>CPU: Testing write buffer coherency: > > ... > Mount-cache hash table entries: 512 > CPU: Testing write buffer coherency: ok > NET: Registered protocol family 16 > MUX: initialized M19_1610_CAM_RSTZ > ... > MUX: initialized PWL > OMAP DMA hardware version 1 > DMA capabilities: 000c0000:00000000:01ff:003f:007f > Initializing OMAP McBSP system > omap_dsp_init() done > USB: hmc 16, usb2 alt 0 wires > i2c_omap i2c_omap.1: bus 1 rev2.2 at 100 kHz > tps65010: version 2 May 2005 > Time: 32k_counter clocksource has been installed. > Switched to high resolution mode on CPU 0 > NET: Registered protocol family 2 Sounds like it's working on omap1 then :) Tony