* Kevin Hilman <khilman@mvista.com> [071022 17:18]:
> A cleaner way than my previous static fix...  Rather than setting a
> static sys_ck.rate, detect the correct value at boot time.
> 
> Signed-off-by: Kevin Hilman <khilman@mvista.com>
> 
> ---
>  arch/arm/mach-omap2/clock24xx.c |    1 +
>  arch/arm/mach-omap2/clock24xx.h |    1 -
>  2 files changed, 1 insertion(+), 1 deletion(-)
> 
> Index: dev/arch/arm/mach-omap2/clock24xx.c
> ===================================================================
> --- dev.orig/arch/arm/mach-omap2/clock24xx.c
> +++ dev/arch/arm/mach-omap2/clock24xx.c
> @@ -475,6 +475,7 @@ int __init omap2_clk_init(void)
>  	clk_init(&omap2_clk_functions);
>  
>  	omap2_osc_clk_recalc(&osc_ck);
> +	omap2_sys_clk_recalc(&sys_ck);
>  
>  	for (clkp = onchip_24xx_clks;
>  	     clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
> Index: dev/arch/arm/mach-omap2/clock24xx.h
> ===================================================================
> --- dev.orig/arch/arm/mach-omap2/clock24xx.h
> +++ dev/arch/arm/mach-omap2/clock24xx.h
> @@ -581,7 +581,6 @@ static struct clk osc_ck = {		/* (*12, *
>  /* With out modem likely 12MHz, with modem likely 13MHz */
>  static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
>  	.name		= "sys_ck",		/* ~ ref_clk also */
> -	.rate           = 13000000,
>  	.parent		= &osc_ck,
>  	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
>  				ALWAYS_ENABLED | RATE_PROPAGATES,
> --

I'll undo your earlier patch and apply first part of this if you don't
mind. Also merged comments from your first patch, hope that's OK with
you, see attached.

Regards,

Tony