Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h

[Tony Lindgren <tony@atomide.com>]

* Hiroshi DOYU <Hiroshi.DOYU@nokia.com> [071129 09:04]:
> Hi Tony,
> 
> From: "ext Tony Lindgren" <tony@atomide.com>
> Subject: Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
> Date: Wed, 28 Nov 2007 15:35:24 -0800
> 
> > * Tony Lindgren <tony@atomide.com> [071128 08:59]:
> > > * Hiroshi DOYU <Hiroshi.DOYU@nokia.com> [071128 01:55]:
> > > > Hi Tony,
> > > > 
> > > > From: "ext Tony Lindgren" <tony@atomide.com>
> > > > Subject: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
> > > > Date: Tue, 27 Nov 2007 21:18:12 -0800
> > > > 
> > > > > Hi all,
> > > > > 
> > > > > As discussed earlier, here are the patches to move dspgateway
> > > > > to under drivers.
> > > > > 
> > > > > Hiroshi san & Toshihiro san, can you take a quick look at these
> > > > > two patches and ack?
> > > > > 
> > > > > I've only compile tested on osk and n800. There should not be any
> > > > > functional changes. Some inline functions I had to export though.
> > > > 
> > > > Thank you for the patch, but it doesn't seem to work. I am
> > > > now investigating....
> > > 
> > > Oops, does the DSP get initialized?
> > > 
> > > > At least, I'd like to make sure that the code itself works fine at
> > > > this migration both on N8x0 and OSK.
> > > 
> > > Yes that would be great :)
> > 
> > No idea why it would not work, but here's one more clean-up patch in
> > order to send the MMU framework upstream.
> 
> With OSK5912, I verified that the demo program("demo_console") worked
> fine with your 3 patches. Probably something was broken just with
> OMAP2. I am checking it bit more.

OK, that's good to hear. Let's wait until you're happy before pushing
this.

Tony