From: Tony Lindgren <tony@atomide.com>
To: Felipe Balbi <felipe.balbi@nokia.com>
Cc: linux-omap@vger.kernel.org, "Jouni Högander" <jouni.hogander@nokia.com>
Subject: Re: [PATCH] USB: MUSB: Better sysconf reg settings on PM point of view
Date: Fri, 2 May 2008 15:57:00 -0700 [thread overview]
Message-ID: <20080502225659.GU8981@atomide.com> (raw)
In-Reply-To: <1209467151-24972-1-git-send-email-felipe.balbi@nokia.com>
* Felipe Balbi <felipe.balbi@nokia.com> [080429 04:08]:
> The following patch is needed because usb is preventing core
> powerdomain to enter sleep state.
>
> Thanks to Jouni Högander for pointing this
Pushing today.
FYI, I'm putting together patches to get rid of the __REG32 and
__REG16 macros in order to get multi-omap booting working between
926, arm11, and cortex using the same kernel.
The __REG macros won't work for multi-omap when the IO
bases are different as these macros cannot be replaced by
functions in io.c.
Tony
> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
> Signed-off-by: Jouni Högander <jouni.hogander@nokia.com>
> ---
> drivers/usb/musb/omap2430.c | 23 ++++++++++++-----------
> 1 files changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> index e092393..36f1739 100644
> --- a/drivers/usb/musb/omap2430.c
> +++ b/drivers/usb/musb/omap2430.c
> @@ -224,6 +224,14 @@ int __init musb_platform_init(struct musb *musb)
> musb->xceiv = *xceiv;
> musb_platform_resume(musb);
>
> + OTG_SYSCONFIG_REG &= ~ENABLEWAKEUP; /* disable wakeup */
> + OTG_SYSCONFIG_REG &= ~NOSTDBY; /* remove possible nostdby */
> + OTG_SYSCONFIG_REG |= SMARTSTDBY; /* enable smart standby */
> + OTG_SYSCONFIG_REG &= ~AUTOIDLE; /* disable auto idle */
> + OTG_SYSCONFIG_REG &= ~NOIDLE; /* remove possible noidle */
> + OTG_SYSCONFIG_REG |= SMARTIDLE; /* enable smart idle */
> + OTG_SYSCONFIG_REG |= AUTOIDLE; /* enable auto idle */
> +
> OTG_INTERFSEL_REG |= ULPI_12PIN;
>
> pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
> @@ -250,12 +258,8 @@ int musb_platform_suspend(struct musb *musb)
> return 0;
>
> /* in any role */
> - OTG_FORCESTDBY_REG &= ~ENABLEFORCE; /* disable MSTANDBY */
> - OTG_SYSCONFIG_REG &= FORCESTDBY; /* enable force standby */
> - OTG_SYSCONFIG_REG &= ~AUTOIDLE; /* disable auto idle */
> - OTG_SYSCONFIG_REG |= SMARTIDLE; /* enable smart idle */
> - OTG_FORCESTDBY_REG |= ENABLEFORCE; /* enable MSTANDBY */
> - OTG_SYSCONFIG_REG |= AUTOIDLE; /* enable auto idle */
> + OTG_FORCESTDBY_REG |= ENABLEFORCE; /* enable MSTANDBY */
> + OTG_SYSCONFIG_REG |= ENABLEWAKEUP; /* enable wakeup */
>
> if (musb->xceiv.set_suspend)
> musb->xceiv.set_suspend(&musb->xceiv, 1);
> @@ -281,11 +285,8 @@ int musb_platform_resume(struct musb *musb)
> else
> clk_enable(musb->clock);
>
> - OTG_FORCESTDBY_REG &= ~ENABLEFORCE; /* disable MSTANDBY */
> - OTG_SYSCONFIG_REG |= SMARTSTDBY; /* enable smart standby */
> - OTG_SYSCONFIG_REG &= ~AUTOIDLE; /* disable auto idle */
> - OTG_SYSCONFIG_REG |= SMARTIDLE; /* enable smart idle */
> - OTG_SYSCONFIG_REG |= AUTOIDLE; /* enable auto idle */
> + OTG_SYSCONFIG_REG &= ~ENABLEWAKEUP; /* disable wakeup */
> + OTG_FORCESTDBY_REG &= ~ENABLEFORCE; /* disable MSTANDBY */
>
> return 0;
> }
> --
> 1.5.5.1.99.gf0ec4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2008-05-02 22:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-29 11:05 [PATCH] USB: MUSB: Better sysconf reg settings on PM point of view Felipe Balbi
2008-05-02 22:57 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080502225659.GU8981@atomide.com \
--to=tony@atomide.com \
--cc=felipe.balbi@nokia.com \
--cc=jouni.hogander@nokia.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox