From: Tony Lindgren <tony@atomide.com>
To: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Jarkko Nikula <jarkko.nikula@nokia.com>, linux-omap@vger.kernel.org
Subject: Re: [PATCH] ARM: OMAP: Enable TSC2301 drivers in N800 defconfig
Date: Fri, 2 May 2008 16:26:09 -0700 [thread overview]
Message-ID: <20080502232609.GB8981@atomide.com> (raw)
In-Reply-To: <20080428094833.GA4357@gandalf.research.nokia.com>
* Felipe Balbi <felipe.balbi@nokia.com> [080428 02:49]:
> On Mon, Apr 28, 2008 at 11:08:34AM +0300, Jarkko Nikula wrote:
> > Commit b11689b7a741b18d612ace8dac231a030f947b90 enable drivers for chips
> > used in Nokia N810 but disable drivers for TSC2301 which is used in N800.
> > This patch enable them back.
> >
> > Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
> Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Pushing today.
Tony
> > ---
> > arch/arm/configs/n800_defconfig | 136 ++++++++++++++++++++++++++-------------
> > 1 files changed, 91 insertions(+), 45 deletions(-)
> >
> > diff --git a/arch/arm/configs/n800_defconfig b/arch/arm/configs/n800_defconfig
> > index a8e133c..98b4db0 100644
> > --- a/arch/arm/configs/n800_defconfig
> > +++ b/arch/arm/configs/n800_defconfig
> > @@ -1,7 +1,7 @@
> > #
> > # Automatically generated make config: don't edit
> > -# Linux kernel version: 2.6.25-rc8-omap1
> > -# Tue Apr 8 15:34:27 2008
> > +# Linux kernel version: 2.6.25-omap1
> > +# Mon Apr 28 10:58:14 2008
> > #
> > CONFIG_ARM=y
> > CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> > @@ -148,7 +148,7 @@ CONFIG_CLASSIC_RCU=y
> > # CONFIG_ARCH_KS8695 is not set
> > # CONFIG_ARCH_NS9XXX is not set
> > # CONFIG_ARCH_MXC is not set
> > -# CONFIG_ARCH_ORION is not set
> > +# CONFIG_ARCH_ORION5X is not set
> > # CONFIG_ARCH_PNX4008 is not set
> > # CONFIG_ARCH_PXA is not set
> > # CONFIG_ARCH_RPC is not set
> > @@ -172,6 +172,8 @@ CONFIG_ARCH_OMAP2=y
> > # OMAP Feature Selections
> > #
> > CONFIG_OMAP_DEBUG_SRAM_PATCH=y
> > +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
> > +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
> > CONFIG_OMAP_RESET_CLOCKS=y
> > CONFIG_OMAP_BOOT_TAG=y
> > CONFIG_OMAP_BOOT_REASON=y
> > @@ -366,8 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
> > # CONFIG_TCP_MD5SIG is not set
> > # CONFIG_IP_VS is not set
> > # CONFIG_IPV6 is not set
> > -# CONFIG_INET6_XFRM_TUNNEL is not set
> > -# CONFIG_INET6_TUNNEL is not set
> > # CONFIG_NETLABEL is not set
> > # CONFIG_NETWORK_SECMARK is not set
> > CONFIG_NETFILTER=y
> > @@ -657,6 +657,7 @@ CONFIG_NETDEV_10000=y
> > #
> > # CONFIG_WLAN_PRE80211 is not set
> > # CONFIG_WLAN_80211 is not set
> > +# CONFIG_IWLWIFI_LEDS is not set
> >
> > #
> > # USB Network Adapters
> > @@ -713,6 +714,7 @@ CONFIG_INPUT_KEYBOARD=y
> > # CONFIG_KEYBOARD_NEWTON is not set
> > # CONFIG_KEYBOARD_STOWAWAY is not set
> > # CONFIG_KEYBOARD_OMAP is not set
> > +CONFIG_KEYBOARD_TSC2301=y
> > CONFIG_KEYBOARD_LM8323=y
> > # CONFIG_KEYBOARD_GPIO is not set
> > # CONFIG_INPUT_MOUSE is not set
> > @@ -732,6 +734,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
> > CONFIG_TOUCHSCREEN_TSC2005=y
> > # CONFIG_TOUCHSCREEN_TSC2102 is not set
> > # CONFIG_TOUCHSCREEN_TSC210X is not set
> > +CONFIG_TOUCHSCREEN_TSC2301=y
> > # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
> > # CONFIG_INPUT_MISC is not set
> >
> > @@ -784,13 +787,6 @@ CONFIG_I2C_BOARDINFO=y
> > # CONFIG_I2C_CHARDEV is not set
> >
> > #
> > -# I2C Algorithms
> > -#
> > -# CONFIG_I2C_ALGOBIT is not set
> > -# CONFIG_I2C_ALGOPCF is not set
> > -# CONFIG_I2C_ALGOPCA is not set
> > -
> > -#
> > # I2C Hardware Bus support
> > #
> > # CONFIG_I2C_GPIO is not set
> > @@ -801,6 +797,7 @@ CONFIG_I2C_OMAP=y
> > # CONFIG_I2C_TAOS_EVM is not set
> > # CONFIG_I2C_STUB is not set
> > # CONFIG_I2C_TINY_USB is not set
> > +# CONFIG_I2C_PCA_PLATFORM is not set
> >
> > #
> > # Miscellaneous I2C Chip support
> > @@ -845,7 +842,8 @@ CONFIG_SPI_OMAP24XX=y
> > # CONFIG_SPI_TSC2101 is not set
> > # CONFIG_SPI_TSC2102 is not set
> > # CONFIG_SPI_TSC210X is not set
> > -# CONFIG_SPI_TSC2301 is not set
> > +CONFIG_SPI_TSC2301=y
> > +CONFIG_SPI_TSC2301_AUDIO=y
> > # CONFIG_SPI_SPIDEV is not set
> > # CONFIG_SPI_TLE62X0 is not set
> > CONFIG_HAVE_GPIO_LIB=y
> > @@ -944,33 +942,51 @@ CONFIG_SSB_POSSIBLE=y
> > #
> > # CONFIG_MFD_SM501 is not set
> > # CONFIG_MFD_ASIC3 is not set
> > +# CONFIG_HTC_EGPIO is not set
> > +# CONFIG_HTC_PASIC3 is not set
> >
> > #
> > # Multimedia devices
> > #
> > CONFIG_VIDEO_DEV=y
> > CONFIG_VIDEO_V4L2_COMMON=y
> > -# CONFIG_VIDEO_V4L1 is not set
> > -# CONFIG_VIDEO_V4L1_COMPAT is not set
> > +CONFIG_VIDEO_ALLOW_V4L1=y
> > +CONFIG_VIDEO_V4L1_COMPAT=y
> > CONFIG_VIDEO_V4L2=y
> > +CONFIG_VIDEO_V4L1=y
> > CONFIG_VIDEO_CAPTURE_DRIVERS=y
> > # CONFIG_VIDEO_ADV_DEBUG is not set
> > CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
> > CONFIG_VIDEO_TCM825X=y
> > # CONFIG_VIDEO_VIVI is not set
> > +# CONFIG_VIDEO_CPIA is not set
> > +# CONFIG_VIDEO_CPIA2 is not set
> > # CONFIG_VIDEO_SAA5246A is not set
> > # CONFIG_VIDEO_SAA5249 is not set
> > +# CONFIG_TUNER_3036 is not set
> > +# CONFIG_VIDEO_AU0828 is not set
> > # CONFIG_VIDEO_OMAP_CAMERA is not set
> > CONFIG_VIDEO_OMAP2=y
> > CONFIG_V4L_USB_DRIVERS=y
> > # CONFIG_VIDEO_PVRUSB2 is not set
> > # CONFIG_VIDEO_EM28XX is not set
> > # CONFIG_VIDEO_USBVISION is not set
> > +# CONFIG_USB_VICAM is not set
> > +# CONFIG_USB_IBMCAM is not set
> > +# CONFIG_USB_KONICAWC is not set
> > +# CONFIG_USB_QUICKCAM_MESSENGER is not set
> > # CONFIG_USB_ET61X251 is not set
> > +# CONFIG_VIDEO_OVCAMCHIP is not set
> > +# CONFIG_USB_W9968CF is not set
> > +# CONFIG_USB_OV511 is not set
> > +# CONFIG_USB_SE401 is not set
> > # CONFIG_USB_SN9C102 is not set
> > +# CONFIG_USB_STV680 is not set
> > # CONFIG_USB_ZC0301 is not set
> > +# CONFIG_USB_PWC is not set
> > # CONFIG_USB_ZR364XX is not set
> > # CONFIG_USB_STKWEBCAM is not set
> > +# CONFIG_SOC_CAMERA is not set
> > CONFIG_RADIO_ADAPTERS=y
> > CONFIG_RADIO_TEA5761=y
> > # CONFIG_USB_DSBR is not set
> > @@ -1083,11 +1099,11 @@ CONFIG_SND_OMAP24XX_EAC=y
> > # CONFIG_SND_SOC is not set
> >
> > #
> > -# SoC Audio support for SuperH
> > +# ALSA SoC audio for Freescale SOCs
> > #
> >
> > #
> > -# ALSA SoC audio for Freescale SOCs
> > +# SoC Audio for the Texas Instruments OMAP
> > #
> >
> > #
> > @@ -1267,6 +1283,7 @@ CONFIG_LEDS_TRIGGER_TIMER=y
> > CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> > CONFIG_RTC_LIB=y
> > # CONFIG_RTC_CLASS is not set
> > +# CONFIG_UIO is not set
> >
> > #
> > # CBUS support
> > @@ -1304,7 +1321,6 @@ CONFIG_FS_MBCACHE=m
> > # CONFIG_JFS_FS is not set
> > # CONFIG_FS_POSIX_ACL is not set
> > # CONFIG_XFS_FS is not set
> > -# CONFIG_GFS2_FS is not set
> > # CONFIG_OCFS2_FS is not set
> > CONFIG_DNOTIFY=y
> > CONFIG_INOTIFY=y
> > @@ -1460,6 +1476,7 @@ CONFIG_SCHED_DEBUG=y
> > CONFIG_DEBUG_BUGVERBOSE=y
> > # CONFIG_DEBUG_INFO is not set
> > # CONFIG_DEBUG_VM is not set
> > +# CONFIG_DEBUG_WRITECOUNT is not set
> > # CONFIG_DEBUG_LIST is not set
> > # CONFIG_DEBUG_SG is not set
> > CONFIG_FRAME_POINTER=y
> > @@ -1484,48 +1501,77 @@ CONFIG_SECURITY=y
> > # CONFIG_SECURITY_LOWMEM is not set
> > CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
> > CONFIG_CRYPTO=y
> > -# CONFIG_CRYPTO_SEQIV is not set
> > +
> > +#
> > +# Crypto core or helper
> > +#
> > # CONFIG_CRYPTO_MANAGER is not set
> > +# CONFIG_CRYPTO_GF128MUL is not set
> > +# CONFIG_CRYPTO_NULL is not set
> > +# CONFIG_CRYPTO_CRYPTD is not set
> > +# CONFIG_CRYPTO_AUTHENC is not set
> > +# CONFIG_CRYPTO_TEST is not set
> > +
> > +#
> > +# Authenticated Encryption with Associated Data
> > +#
> > +# CONFIG_CRYPTO_CCM is not set
> > +# CONFIG_CRYPTO_GCM is not set
> > +# CONFIG_CRYPTO_SEQIV is not set
> > +
> > +#
> > +# Block modes
> > +#
> > +# CONFIG_CRYPTO_CBC is not set
> > +# CONFIG_CRYPTO_CTR is not set
> > +# CONFIG_CRYPTO_CTS is not set
> > +# CONFIG_CRYPTO_ECB is not set
> > +# CONFIG_CRYPTO_LRW is not set
> > +# CONFIG_CRYPTO_PCBC is not set
> > +# CONFIG_CRYPTO_XTS is not set
> > +
> > +#
> > +# Hash modes
> > +#
> > # CONFIG_CRYPTO_HMAC is not set
> > # CONFIG_CRYPTO_XCBC is not set
> > -# CONFIG_CRYPTO_NULL is not set
> > +
> > +#
> > +# Digest
> > +#
> > +# CONFIG_CRYPTO_CRC32C is not set
> > # CONFIG_CRYPTO_MD4 is not set
> > # CONFIG_CRYPTO_MD5 is not set
> > +# CONFIG_CRYPTO_MICHAEL_MIC is not set
> > # CONFIG_CRYPTO_SHA1 is not set
> > # CONFIG_CRYPTO_SHA256 is not set
> > # CONFIG_CRYPTO_SHA512 is not set
> > -# CONFIG_CRYPTO_WP512 is not set
> > # CONFIG_CRYPTO_TGR192 is not set
> > -# CONFIG_CRYPTO_GF128MUL is not set
> > -# CONFIG_CRYPTO_ECB is not set
> > -# CONFIG_CRYPTO_CBC is not set
> > -# CONFIG_CRYPTO_PCBC is not set
> > -# CONFIG_CRYPTO_LRW is not set
> > -# CONFIG_CRYPTO_XTS is not set
> > -# CONFIG_CRYPTO_CTR is not set
> > -# CONFIG_CRYPTO_GCM is not set
> > -# CONFIG_CRYPTO_CCM is not set
> > -# CONFIG_CRYPTO_CRYPTD is not set
> > -# CONFIG_CRYPTO_DES is not set
> > -# CONFIG_CRYPTO_FCRYPT is not set
> > -# CONFIG_CRYPTO_BLOWFISH is not set
> > -# CONFIG_CRYPTO_TWOFISH is not set
> > -# CONFIG_CRYPTO_SERPENT is not set
> > +# CONFIG_CRYPTO_WP512 is not set
> > +
> > +#
> > +# Ciphers
> > +#
> > # CONFIG_CRYPTO_AES is not set
> > +# CONFIG_CRYPTO_ANUBIS is not set
> > +# CONFIG_CRYPTO_ARC4 is not set
> > +# CONFIG_CRYPTO_BLOWFISH is not set
> > +# CONFIG_CRYPTO_CAMELLIA is not set
> > # CONFIG_CRYPTO_CAST5 is not set
> > # CONFIG_CRYPTO_CAST6 is not set
> > -# CONFIG_CRYPTO_TEA is not set
> > -# CONFIG_CRYPTO_ARC4 is not set
> > +# CONFIG_CRYPTO_DES is not set
> > +# CONFIG_CRYPTO_FCRYPT is not set
> > # CONFIG_CRYPTO_KHAZAD is not set
> > -# CONFIG_CRYPTO_ANUBIS is not set
> > -# CONFIG_CRYPTO_SEED is not set
> > # CONFIG_CRYPTO_SALSA20 is not set
> > +# CONFIG_CRYPTO_SEED is not set
> > +# CONFIG_CRYPTO_SERPENT is not set
> > +# CONFIG_CRYPTO_TEA is not set
> > +# CONFIG_CRYPTO_TWOFISH is not set
> > +
> > +#
> > +# Compression
> > +#
> > # CONFIG_CRYPTO_DEFLATE is not set
> > -# CONFIG_CRYPTO_MICHAEL_MIC is not set
> > -# CONFIG_CRYPTO_CRC32C is not set
> > -# CONFIG_CRYPTO_CAMELLIA is not set
> > -# CONFIG_CRYPTO_TEST is not set
> > -# CONFIG_CRYPTO_AUTHENC is not set
> > # CONFIG_CRYPTO_LZO is not set
> > CONFIG_CRYPTO_HW=y
> >
> > --
> > 1.5.4.4
>
> --
> - Balbi
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-05-02 23:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-28 8:08 [PATCH 0/1] ARM: OMAP: Enable TSC2301 drivers in N800 defconfig Jarkko Nikula
2008-04-28 8:08 ` [PATCH] " Jarkko Nikula
2008-04-28 9:48 ` Felipe Balbi
2008-04-28 10:21 ` [PATCH] OMAP: EHCI: Wrong ehci init for 2430 Pandita, Vikram
2008-04-28 10:31 ` Felipe Balbi
2008-04-30 0:28 ` Tony Lindgren
2008-04-28 10:41 ` Felipe Balbi
2008-05-02 23:26 ` Tony Lindgren [this message]
2008-04-28 23:23 ` [PATCH 0/1] ARM: OMAP: Enable TSC2301 drivers in N800 defconfig Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080502232609.GB8981@atomide.com \
--to=tony@atomide.com \
--cc=felipe.balbi@nokia.com \
--cc=jarkko.nikula@nokia.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox