From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Dasu, Karthik P" <karthik-dp@ti.com>
Subject: Re: [PATCH 0/2] Add sram34xx.S
Date: Thu, 15 May 2008 14:40:41 -0700 [thread overview]
Message-ID: <20080515214040.GU8928@atomide.com> (raw)
In-Reply-To: <1206704800-6768-1-git-send-email-tony@atomide.com>
[-- Attachment #1: Type: text/plain, Size: 492 bytes --]
* Tony Lindgren <tony@atomide.com> [080328 04:46]:
> Hi all,
>
> Following two patches add sram34xx.S based on Karthik's patch and what's
> at [1]. Looks like the sram code in [1] is newer so I've used that.
> Let me know if that's not the case.
>
> Karthik, can you please check and ack? I've only compile tested them.
>
> Regards,
>
> Tony
>
> [1] http://linux.omap.com/pub/kernel/3430zoom/linux-ldp-v1.0b.tar.gz
I'll push these two patches today meged into single patch below.
Tony
[-- Attachment #2: omap3-sram --]
[-- Type: text/plain, Size: 10360 bytes --]
>From 8d00571b0ecb2fb21b35e5d13b2959a71142abfa Mon Sep 17 00:00:00 2001
From: Karthik Dasu <karthik-dp@ti.com>
Date: Thu, 15 May 2008 14:27:08 -0700
Subject: [PATCH] ARM: OMAP3: Add sram34xx.S
This patch adds sram34xx.S for programming the core DPLL.
It is based on Karthik's earlier patch and TI's sram-fn_34xxS from:
http://linux.omap.com/pub/kernel/3430zoom/linux-ldp-v1.0b.tar.gz
Patch modified by Tony for the new register access.
Signed-off-by: Karthik Dasu<karthik-dp@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 552664c..ea0cf43 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -9,6 +9,7 @@ obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2) += sram24xx.o
+obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
new file mode 100644
index 0000000..74873df
--- /dev/null
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -0,0 +1,209 @@
+/*
+ * linux/arch/arm/mach-omap3/sram.S
+ *
+ * Omap3 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2007
+ * Texas Instruments Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/io.h>
+
+#include "sdrc.h"
+#include "cm.h"
+
+ .text
+
+ENTRY(omap34xx_sram_ddr_init)
+ stmfd sp!, {r0 - r12, lr} @ save registers on stack
+ ldmfd sp!, {r0 - r12, pc} @ restore regs and return
+ENTRY(omap34xx_sram_ddr_init_sz)
+ .word . - omap34xx_sram_ddr_init
+
+ENTRY(omap34xx_sram_reprogram_sdrc)
+ stmfd sp!, {r0 - r10, lr} @ save registers on stack
+ ldmfd sp!, {r0 - r10, pc} @ restore regs and return
+ENTRY(omap34xx_sram_reprogram_sdrc_sz)
+ .word . - omap34xx_sram_reprogram_sdrc
+
+/*
+ * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
+ */
+ENTRY(omap34xx_sram_set_prcm)
+ stmfd sp!, {r0-r12, lr} @ regs to stack
+ENTRY(omap34xx_sram_set_prcm_sz)
+ .word . - omap34xx_sram_set_prcm
+
+/*
+ * Change frequency of core dpll
+ * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ */
+ENTRY(omap34xx_sram_configure_core_dpll)
+ stmfd sp!, {r1-r12, lr} @ store regs to stack
+ cmp r3, #0x2
+ blne configure_sdrc
+ cmp r3, #0x2
+ blne lock_dll
+ cmp r3, #0x1
+ blne unlock_dll
+ bl sdram_in_selfrefresh @ put the SDRAM in self refresh
+ bl configure_core_dpll
+ bl enable_sdrc
+ cmp r3, #0x1
+ blne wait_dll_unlock
+ cmp r3, #0x2
+ blne wait_dll_lock
+ cmp r3, #0x1
+ blne configure_sdrc
+ mov r0, #0 @ return value
+ ldmfd sp!, {r1-r12, pc} @ restore regs and return
+unlock_dll:
+ ldr r4, omap34xx_sdrc_dlla_ctrl
+ ldr r5, [r4]
+ orr r5, r5, #0x4
+ str r5, [r4]
+ bx lr
+lock_dll:
+ ldr r4, omap34xx_sdrc_dlla_ctrl
+ ldr r5, [r4]
+ bic r5, r5, #0x4
+ str r5, [r4]
+ bx lr
+sdram_in_selfrefresh:
+ mov r5, #0x0 @ Move 0 to R5
+ mcr p15, 0, r5, c7, c10, 5 @ memory barrier
+ ldr r4, omap34xx_sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+ ldr r4, omap34xx_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
+ ldr r5, [r4]
+ bic r5, r5, #0x2 @ disable iclk bit for SRDC
+ str r5, [r4]
+wait_sdrc_idle:
+ ldr r4, omap34xx_cm_idlest1_core
+ ldr r5, [r4]
+ and r5, r5, #0x2 @ check for SDRC idle
+ cmp r5, #2
+ bne wait_sdrc_idle
+ bx lr
+configure_core_dpll:
+ ldr r4, omap34xx_cm_clksel1_pll
+ ldr r5, [r4]
+ ldr r6, core_m2_mask_val @ modify m2 for core dpll
+ and r5, r5, r6
+ orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
+ str r5, [r4]
+ mov r5, #0x800 @ wait for the clock to stabilise
+ cmp r3, #2
+ bne wait_clk_stable
+ bx lr
+wait_clk_stable:
+ subs r5, r5, #1
+ bne wait_clk_stable
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bx lr
+enable_sdrc:
+ ldr r4, omap34xx_cm_iclken1_core
+ ldr r5, [r4]
+ orr r5, r5, #0x2 @ enable iclk bit for SDRC
+ str r5, [r4]
+wait_sdrc_idle1:
+ ldr r4, omap34xx_cm_idlest1_core
+ ldr r5, [r4]
+ and r5, r5, #0x2
+ cmp r5, #0
+ bne wait_sdrc_idle1
+ ldr r4, omap34xx_sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+ bx lr
+wait_dll_lock:
+ ldr r4, omap34xx_sdrc_dlla_status
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x4
+ bne wait_dll_lock
+ bx lr
+wait_dll_unlock:
+ ldr r4, omap34xx_sdrc_dlla_status
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x0
+ bne wait_dll_unlock
+ bx lr
+configure_sdrc:
+ ldr r4, omap34xx_sdrc_rfr_ctrl
+ str r0, [r4]
+ ldr r4, omap34xx_sdrc_actim_ctrla
+ str r1, [r4]
+ ldr r4, omap34xx_sdrc_actim_ctrlb
+ str r2, [r4]
+ bx lr
+
+omap34xx_sdrc_power:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+omap34xx_cm_clksel1_pll:
+ .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap34xx_cm_idlest1_core:
+ .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
+omap34xx_cm_iclken1_core:
+ .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
+omap34xx_sdrc_rfr_ctrl:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap34xx_sdrc_actim_ctrla:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A)
+omap34xx_sdrc_actim_ctrlb:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B)
+omap34xx_sdrc_dlla_status:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+omap34xx_sdrc_dlla_ctrl:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
+core_m2_mask_val:
+ .word 0xE7FFFFFF
+
+ENTRY(omap34xx_sram_configure_core_dpll_sz)
+ .word . - omap34xx_sram_configure_core_dpll
+
+/*
+ * Reprogram GPMC
+ */
+ENTRY(omap34xx_sram_reprogram_gpmc)
+ stmfd sp!, {r0-r12, lr} @ regs to stack
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+
+ENTRY(omap34xx_sram_reprogram_gpmc_sz)
+ .word . - omap34xx_sram_reprogram_gpmc
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 2fc8f61..fb3f0d1 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -461,6 +461,67 @@ static inline int omap24xx_sram_init(void)
}
#endif
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
+u32 omap2_sram_reprogram_gpmc(u32 perf_level)
+{
+ if (!_omap2_sram_reprogram_gpmc)
+ omap_sram_error();
+
+ return _omap2_sram_reprogram_gpmc(perf_level);
+}
+
+static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
+ u32 freqsel, u32 m2);
+u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
+{
+ if (!_omap2_sram_configure_core_dpll)
+ omap_sram_error();
+
+ return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+}
+
+/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
+void restore_sram_functions(void)
+{
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
+
+ _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+ omap34xx_sram_reprogram_gpmc_sz);
+
+ _omap2_sram_configure_core_dpll =
+ omap_sram_push(omap34xx_sram_configure_core_dpll,
+ omap34xx_sram_configure_core_dpll_sz);
+}
+
+int __init omap34xx_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
+ omap34xx_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
+ omap34xx_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
+ omap34xx_sram_set_prcm_sz);
+
+ _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+ omap34xx_sram_reprogram_gpmc_sz);
+
+ _omap2_sram_configure_core_dpll =
+ omap_sram_push(omap34xx_sram_configure_core_dpll,
+ omap34xx_sram_configure_core_dpll_sz);
+
+ return 0;
+}
+#else
+static inline int omap34xx_sram_init(void)
+{
+ return 0;
+}
+#endif
+
int __init omap_sram_init(void)
{
omap_detect_sram();
@@ -470,6 +531,8 @@ int __init omap_sram_init(void)
omap1_sram_init();
else if (cpu_is_omap24xx())
omap24xx_sram_init();
+ else if (cpu_is_omap34xx())
+ omap34xx_sram_init();
return 0;
}
diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h
index 673b396..660da4d 100644
--- a/include/asm-arm/arch-omap/sdrc.h
+++ b/include/asm-arm/arch-omap/sdrc.h
@@ -25,6 +25,8 @@
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
+#define SDRC_ACTIM_CTRL_A 0x09c
+#define SDRC_ACTIM_CTRL_B 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
index cc57dab..830e0fa 100644
--- a/include/asm-arm/arch-omap/sram.h
+++ b/include/asm-arm/arch-omap/sram.h
@@ -43,4 +43,23 @@ extern void omap24xx_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
u32 mem_type);
extern unsigned long omap24xx_sram_reprogram_sdrc_sz;
+
+extern void omap34xx_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap34xx_sram_ddr_init_sz;
+
+extern void omap34xx_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap34xx_sram_reprogram_sdrc_sz;
+
+extern u32 omap34xx_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap34xx_sram_set_prcm_sz;
+
+extern u32 omap34xx_sram_reprogram_gpmc(u32 perf_level);
+extern unsigned long omap34xx_sram_reprogram_gpmc_sz;
+
+extern u32 omap34xx_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2);
+extern unsigned long omap34xx_sram_configure_core_dpll_sz;
+
#endif
prev parent reply other threads:[~2008-05-15 21:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-28 11:46 [PATCH 0/2] Add sram34xx.S Tony Lindgren
2008-03-28 11:46 ` [PATCH 1/2] ARM: OMAP3: Add 34xx SRAM functions Tony Lindgren
2008-03-28 11:46 ` [PATCH 2/2] ARCH: OMAP3: Make SRAM code from TI CDP compile and work Tony Lindgren
[not found] ` <1206704800-6768-4-git-send-email-tony@atomide.com>
2008-03-28 11:46 ` [PATCH] I2C: Fix twl4030 timeouts on omap3430 Tony Lindgren
2008-03-28 11:46 ` Tony Lindgren
2008-03-28 11:49 ` Tony Lindgren
2008-03-28 11:48 ` Tony Lindgren
2008-05-15 21:40 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080515214040.GU8928@atomide.com \
--to=tony@atomide.com \
--cc=karthik-dp@ti.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox