Re: N810: linux-2.6.26-rc2-omap1 with muru.com N810 patches (success)

[green <greenfreedom10@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1810 bytes --]

On Thu, 2008.05.15, 136, Tony Lindgren wrote:
> * green <greenfreedom10@gmail.com> [080515 12:45]:
> > Okay, I've got the zImage and updated patches; thanks.  This zImage does work, 
> > but fails to mount root device (maybe something I did wrong; I'll worry about 
> > that later).  Could you send the config you used?  Or maybe I'm doing 
> > something wrong when compiling.
> 
> The last patch in the series contains the changes to n800_defconfig.
> Also attached as .config.

I don't understand, then, why there are differences between the config 
generated by 'make n800_defconfig' and the config you attached.  Like 
CONFIG_FRAMEBUFFER_CONSOLE is Y in the attached config but N in the generated 
config (and others).

> > I'm compiling on an amd64 system with the following packages (and their 
> > dependencies) from emdebian.org:
> > binutils-arm-linux-gnueabi 2.18.1~cvs20080103-4
> > cpp-4.3-arm-linux-gnueabi 4.3.0-4
> > g++-4.3-arm-linux-gnueabi 4.3.0-4
> > gcc-4.3-arm-linux-gnueabi 4.3.0-4
> > 
> > and in the Makefile:
> > CROSS_COMPILE   ?= arm-linux-gnueabi-
> > 
> > For now I'll try with the latest from linux-omap-2.6 with your patches.
> 
> Yeah that should work. Just dor ARCH=arm CROSS_COMPILE=gcc-4.3-arm-linux-gnueabi-
> If in doubt, you can also try the codesourcery toolchain, but sounds
> like your compiler is just fine.

I have been using the Makefile instead, just changing this:
CROSS_COMPILE ?= arm-linux-gnueabi-

But that still doesn't work so:

I installed 4.2.3-5 of cpp, g++, and gcc and tried it again and finally it 
works.  So I guess I can blame the 4.3 packages, because I have been using them 
all this time in some form, both in the chroot and on the amd64 system.  I 
should have tried 4.2 earlier.

Thanks for your help.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]