* [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 @ 2008-05-15 14:42 Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat 2008-05-16 17:52 ` [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Tony Lindgren 0 siblings, 2 replies; 10+ messages in thread From: Nishant Kamat @ 2008-05-15 14:42 UTC (permalink / raw) To: linux-omap; +Cc: Nishant Kamat This patch adds the register defines for TWL4030 VAUX1. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- include/linux/i2c/twl4030.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 05d07f9..40af46e 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -77,6 +77,8 @@ /* Offsets to Power Registers */ #define TWL4030_VDAC_DEV_GRP 0x3B #define TWL4030_VDAC_DEDICATED 0x3E +#define TWL4030_VAUX1_DEV_GRP 0x17 +#define TWL4030_VAUX1_DEDICATED 0x1A #define TWL4030_VAUX2_DEV_GRP 0x1B #define TWL4030_VAUX2_DEDICATED 0x1E #define TWL4030_VAUX3_DEV_GRP 0x1F -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP. 2008-05-15 14:42 [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Nishant Kamat @ 2008-05-15 14:42 ` Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat 2008-05-16 17:53 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support " Tony Lindgren 2008-05-16 17:52 ` [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Tony Lindgren 1 sibling, 2 replies; 10+ messages in thread From: Nishant Kamat @ 2008-05-15 14:42 UTC (permalink / raw) To: linux-omap; +Cc: Nishant Kamat This adds basic board support for the OMAP3430 LDP development platform. It adds support for the touchscreen, RTC, UART, USB and MMC - all of which work with little or no changes w.r.t. the OMAP3430 SDP. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- arch/arm/mach-omap2/Kconfig | 4 + arch/arm/mach-omap2/Makefile | 3 + arch/arm/mach-omap2/board-ldp.c | 253 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-omap/board-ldp.h | 34 +++++ include/asm-arm/arch-omap/hardware.h | 4 + 5 files changed, 298 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/board-ldp.c create mode 100644 include/asm-arm/arch-omap/board-ldp.h diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5c229cc..d38f8ca 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -98,6 +98,10 @@ config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on ARCH_OMAP2 && ARCH_OMAP2430 +config MACH_OMAP_LDP + bool "OMAP 3 LDP board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + config MACH_OMAP_2430OSK bool "OMAP 2430 OSK board" depends on ARCH_OMAP2 && ARCH_OMAP24XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 552664c..b6eea89 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -44,6 +44,9 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ usb-musb.o usb-ehci.o \ hsmmc.o +obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ + hsmmc.o \ + usb-musb.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o \ board-apollon-mmc.o \ board-apollon-keys.o diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c new file mode 100644 index 0000000..2ac4c9b --- /dev/null +++ b/arch/arm/mach-omap2/board-ldp.c @@ -0,0 +1,253 @@ +/* + * linux/arch/arm/mach-omap2/board-ldp.c + * + * Copyright (C) 2008 Texas Instruments Inc. + * Nishant Kamat <nskamat@ti.com> + * + * Modified from mach-omap2/board-3430sdp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/workqueue.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl4030-rtc.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/mcspi.h> +#include <asm/arch/gpio.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include <asm/arch/gpmc.h> +#include <asm/arch/hsmmc.h> +#include <asm/arch/usb-musb.h> + +#include <asm/io.h> +#include <asm/delay.h> +#include <asm/arch/control.h> + +#define ENABLE_VAUX1_DEDICATED 0x03 +#define ENABLE_VAUX1_DEV_GRP 0x20 + +#define TWL4030_MSECURE_GPIO 22 + +static int ts_gpio; + +#ifdef CONFIG_RTC_DRV_TWL4030 +static int twl4030_rtc_init(void) +{ + int ret = 0; + + /* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */ + if (is_device_type_gp() && is_sil_rev_less_than(OMAP3430_REV_ES2_0)) { + u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C; + int mux_mask = 0x04; + u16 tmp; + + ret = omap_request_gpio(TWL4030_MSECURE_GPIO); + if (ret < 0) { + printk(KERN_ERR "twl4030_rtc_init: can't" + "reserve GPIO:%d !\n", TWL4030_MSECURE_GPIO); + goto out; + } + /* + * TWL4030 will be in secure mode if msecure line from OMAP + * is low. Make msecure line high in order to change the + * TWL4030 RTC time and calender registers. + */ + omap_set_gpio_direction(TWL4030_MSECURE_GPIO, 0); + + tmp = omap_readw(msecure_pad_config_reg); + tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */ + tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */ + omap_writew(tmp, msecure_pad_config_reg); + + omap_set_gpio_dataout(TWL4030_MSECURE_GPIO, 1); + } +out: + return ret; +} + +static void twl4030_rtc_exit(void) +{ + omap_free_gpio(TWL4030_MSECURE_GPIO); +} + +static struct twl4030rtc_platform_data ldp_twl4030rtc_data = { + .init = &twl4030_rtc_init, + .exit = &twl4030_rtc_exit, +}; + +static struct platform_device ldp_twl4030rtc_device = { + .name = "twl4030_rtc", + .id = -1, + .dev = { + .platform_data = &ldp_twl4030rtc_data, + }, +}; +#endif + +/** + * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq + * + * @return - void. If request gpio fails then Flag KERN_ERR. + */ +static void ads7846_dev_init(void) +{ + if (omap_request_gpio(ts_gpio) < 0) { + printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + return; + } + + omap_set_gpio_direction(ts_gpio, 1); + + omap_set_gpio_debounce(ts_gpio, 1); + omap_set_gpio_debounce_time(ts_gpio, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !omap_get_gpio_datain(ts_gpio); +} + +/* + * This enable(1)/disable(0) the voltage for TS: uses twl4030 calls + */ +static int ads7846_vaux_control(int vaux_cntrl) +{ + int ret = 0; + +#ifdef CONFIG_TWL4030_CORE + /* check for return value of ldo_use: if success it returns 0 */ + if (vaux_cntrl == VAUX_ENABLE) { + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VAUX1_DEDICATED, TWL4030_VAUX1_DEDICATED)) + return -EIO; + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VAUX1_DEV_GRP, TWL4030_VAUX1_DEV_GRP)) + return -EIO; + } else if (vaux_cntrl == VAUX_DISABLE) { + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + 0x00, TWL4030_VAUX1_DEDICATED)) + return -EIO; + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + 0x00, TWL4030_VAUX1_DEV_GRP)) + return -EIO; + } +#else + ret = -EIO; +#endif + return ret; +} + +static struct ads7846_platform_data tsc2046_config __initdata = { + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, + .vaux_control = ads7846_vaux_control, +}; + + +static struct omap2_mcspi_device_config tsc2046_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info ldp_spi_board_info[] __initdata = { + [0] = { + /* + * TSC2046 operates at a max freqency of 2MHz, so + * operate slightly below at 1.5MHz + */ + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &tsc2046_mcspi_config, + .irq = 0, + .platform_data = &tsc2046_config, + }, +}; + +static struct platform_device *ldp_devices[] __initdata = { +#ifdef CONFIG_RTC_DRV_TWL4030 + &ldp_twl4030rtc_device, +#endif +}; + +static void __init omap_ldp_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_uart_config ldp_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config ldp_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + }, +}; + +static struct omap_board_config_kernel ldp_config[] __initdata = { + { OMAP_TAG_UART, &ldp_uart_config }, + { OMAP_TAG_MMC, &ldp_mmc_config }, +}; + +static int __init omap_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, NULL, 0); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static void __init omap_ldp_init(void) +{ + platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); + omap_board_config = ldp_config; + omap_board_config_size = ARRAY_SIZE(ldp_config); + ts_gpio = 54; + ldp_spi_board_info[0].irq = OMAP_GPIO_IRQ(ts_gpio); + spi_register_board_info(ldp_spi_board_info, + ARRAY_SIZE(ldp_spi_board_info)); + ads7846_dev_init(); + omap_serial_init(); + usb_musb_init(); + hsmmc_init(); +} + +static void __init omap_ldp_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} +arch_initcall(omap_i2c_init); + +MACHINE_START(OMAP_LDP, "OMAP LDP board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_ldp_map_io, + .init_irq = omap_ldp_init_irq, + .init_machine = omap_ldp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h new file mode 100644 index 0000000..b227561 --- /dev/null +++ b/include/asm-arm/arch-omap/board-ldp.h @@ -0,0 +1,34 @@ +/* + * linux/include/asm-arm/arch-omap/board-ldp.h + * + * Hardware definitions for TI OMAP3 LDP. + * + * Copyright (C) 2008 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_LDP_H +#define __ASM_ARCH_OMAP_LDP_H + +#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ + +#endif /* __ASM_ARCH_OMAP_LDP_H */ diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h index 09f8ef8..fed9a76 100644 --- a/include/asm-arm/arch-omap/hardware.h +++ b/include/asm-arm/arch-omap/hardware.h @@ -343,6 +343,10 @@ #include "board-omap3beagle.h" #endif +#ifdef CONFIG_MACH_OMAP_LDP +#include "board-ldp.h" +#endif + #ifdef CONFIG_MACH_OMAP_APOLLON #include "board-apollon.h" #endif -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat @ 2008-05-15 14:42 ` Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support " Nishant Kamat 2008-05-16 17:54 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP Tony Lindgren 2008-05-16 17:53 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support " Tony Lindgren 1 sibling, 2 replies; 10+ messages in thread From: Nishant Kamat @ 2008-05-15 14:42 UTC (permalink / raw) To: linux-omap; +Cc: Nishant Kamat This patch adds a default config for the OMAP LDP platform. It supports UART, touchscreen, RTC, Mentor USB and MMC drivers. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- arch/arm/configs/omap_ldp_defconfig | 1196 +++++++++++++++++++++++++++++++++++ 1 files changed, 1196 insertions(+), 0 deletions(-) create mode 100644 arch/arm/configs/omap_ldp_defconfig diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig new file mode 100644 index 0000000..9a90975 --- /dev/null +++ b/arch/arm/configs/omap_ldp_defconfig @@ -0,0 +1,1196 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc2-omap1 +# Thu May 15 19:08:39 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +CONFIG_OMAP_DEBUG_SRAM_PATCH=y +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_LDP=y +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_BEAGLE is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_OMAP_STI is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_GPIO=y +CONFIG_TWL4030_MADC=y +# CONFIG_TWL4030_USB is not set +# CONFIG_TWL4030_PWRBUTTON is not set +# CONFIG_TWL4030_POWEROFF is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_LP5521 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +CONFIG_HDQ_MASTER_OMAP=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +CONFIG_W1_SLAVE_BQ27000=y +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_OMAP_AIC23 is not set +# CONFIG_SND_OMAP_TSC2101 is not set +# CONFIG_SND_SX1 is not set +# CONFIG_SND_OMAP_TSC2102 is not set +# CONFIG_SND_OMAP24XX_EAC is not set + +# +# SPI devices +# + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_UIO is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAP LDP 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat @ 2008-05-15 14:42 ` Nishant Kamat 2008-05-16 17:55 ` Tony Lindgren 2008-05-16 17:54 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP Tony Lindgren 1 sibling, 1 reply; 10+ messages in thread From: Nishant Kamat @ 2008-05-15 14:42 UTC (permalink / raw) To: linux-omap; +Cc: Nishant Kamat This patch adds ethernet support (smc911x) for OMAP LDP platform. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- arch/arm/configs/omap_ldp_defconfig | 164 ++++++++++++++++++++++++++++++++- arch/arm/mach-omap2/board-ldp.c | 51 ++++++++++ include/asm-arm/arch-omap/board-ldp.h | 6 + 3 files changed, 218 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index 9a90975..fb2880b 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc2-omap1 -# Thu May 15 19:08:39 2008 +# Thu May 15 19:09:22 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -37,8 +37,11 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set @@ -319,7 +322,86 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking # -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -335,18 +417,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_OMAP_STI is not set @@ -388,12 +473,61 @@ CONFIG_SCSI_WAIT_SCAN=m # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # # Input device support @@ -615,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set # # Multimedia drivers @@ -926,12 +1061,14 @@ CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y @@ -985,6 +1122,26 @@ CONFIG_TMPFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types @@ -1047,6 +1204,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set # # Kernel hacking diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 2ac4c9b..47e86bf 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -46,6 +46,26 @@ #define TWL4030_MSECURE_GPIO 22 +static struct resource ldp_smc911x_resources[] = { + [0] = { + .start = OMAP34XX_ETHR_START, + .end = OMAP34XX_ETHR_START + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device ldp_smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(ldp_smc911x_resources), + .resource = ldp_smc911x_resources, +}; + static int ts_gpio; #ifdef CONFIG_RTC_DRV_TWL4030 @@ -184,16 +204,47 @@ static struct spi_board_info ldp_spi_board_info[] __initdata = { }; static struct platform_device *ldp_devices[] __initdata = { + &ldp_smc911x_device, #ifdef CONFIG_RTC_DRV_TWL4030 &ldp_twl4030rtc_device, #endif }; +static inline void __init ldp_init_smc911x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + int eth_gpio = 0; + + eth_cs = LDP_SMC911X_CS; + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc911x\n"); + return; + } + + ldp_smc911x_resources[0].start = cs_mem_base + 0x0; + ldp_smc911x_resources[0].end = cs_mem_base + 0xf; + udelay(100); + + eth_gpio = LDP_SMC911X_GPIO; + + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + + if (omap_request_gpio(eth_gpio) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + eth_gpio); + return; + } + omap_set_gpio_direction(eth_gpio, 1); +} + static void __init omap_ldp_init_irq(void) { omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); + ldp_init_smc911x(); } static struct omap_uart_config ldp_uart_config __initdata = { diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h index b227561..97c15d9 100644 --- a/include/asm-arm/arch-omap/board-ldp.h +++ b/include/asm-arm/arch-omap/board-ldp.h @@ -29,6 +29,12 @@ #ifndef __ASM_ARCH_OMAP_LDP_H #define __ASM_ARCH_OMAP_LDP_H +#define DEBUG_BASE 0x08000000 + +#define OMAP34XX_ETHR_START DEBUG_BASE +#define LDP_SMC911X_CS 1 +#define LDP_SMC911X_GPIO 152 + #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ #endif /* __ASM_ARCH_OMAP_LDP_H */ -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAP LDP 2008-05-15 14:42 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support " Nishant Kamat @ 2008-05-16 17:55 ` Tony Lindgren 2008-05-19 9:50 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP Kamat, Nishant 0 siblings, 1 reply; 10+ messages in thread From: Tony Lindgren @ 2008-05-16 17:55 UTC (permalink / raw) To: Nishant Kamat; +Cc: linux-omap * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > This patch adds ethernet support (smc911x) for OMAP LDP platform. > > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > arch/arm/configs/omap_ldp_defconfig | 164 ++++++++++++++++++++++++++++++++- > arch/arm/mach-omap2/board-ldp.c | 51 ++++++++++ > include/asm-arm/arch-omap/board-ldp.h | 6 + > 3 files changed, 218 insertions(+), 3 deletions(-) > <snip> > diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c > index 2ac4c9b..47e86bf 100644 > --- a/arch/arm/mach-omap2/board-ldp.c > +++ b/arch/arm/mach-omap2/board-ldp.c > @@ -46,6 +46,26 @@ > > #define TWL4030_MSECURE_GPIO 22 > > +static struct resource ldp_smc911x_resources[] = { > + [0] = { > + .start = OMAP34XX_ETHR_START, > + .end = OMAP34XX_ETHR_START + SZ_4K, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = 0, > + .end = 0, > + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, > + }, > +}; > + > +static struct platform_device ldp_smc911x_device = { > + .name = "smc911x", > + .id = -1, > + .num_resources = ARRAY_SIZE(ldp_smc911x_resources), > + .resource = ldp_smc911x_resources, > +}; > + > static int ts_gpio; > > #ifdef CONFIG_RTC_DRV_TWL4030 > @@ -184,16 +204,47 @@ static struct spi_board_info ldp_spi_board_info[] __initdata = { > }; > > static struct platform_device *ldp_devices[] __initdata = { > + &ldp_smc911x_device, > #ifdef CONFIG_RTC_DRV_TWL4030 > &ldp_twl4030rtc_device, > #endif > }; > > +static inline void __init ldp_init_smc911x(void) > +{ > + int eth_cs; > + unsigned long cs_mem_base; > + int eth_gpio = 0; > + > + eth_cs = LDP_SMC911X_CS; > + > + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { > + printk(KERN_ERR "Failed to request GPMC mem for smc911x\n"); > + return; > + } > + > + ldp_smc911x_resources[0].start = cs_mem_base + 0x0; > + ldp_smc911x_resources[0].end = cs_mem_base + 0xf; > + udelay(100); > + > + eth_gpio = LDP_SMC911X_GPIO; > + > + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); > + > + if (omap_request_gpio(eth_gpio) < 0) { > + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", > + eth_gpio); > + return; > + } > + omap_set_gpio_direction(eth_gpio, 1); > +} > + > static void __init omap_ldp_init_irq(void) > { > omap2_init_common_hw(); > omap_init_irq(); > omap_gpio_init(); > + ldp_init_smc911x(); > } > > static struct omap_uart_config ldp_uart_config __initdata = { > diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h > index b227561..97c15d9 100644 > --- a/include/asm-arm/arch-omap/board-ldp.h > +++ b/include/asm-arm/arch-omap/board-ldp.h > @@ -29,6 +29,12 @@ > #ifndef __ASM_ARCH_OMAP_LDP_H > #define __ASM_ARCH_OMAP_LDP_H > > +#define DEBUG_BASE 0x08000000 > + > +#define OMAP34XX_ETHR_START DEBUG_BASE > +#define LDP_SMC911X_CS 1 > +#define LDP_SMC911X_GPIO 152 > + > #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ > > #endif /* __ASM_ARCH_OMAP_LDP_H */ These redefines will conflict when compiling in support for multiple boards. They should be passed in the platform_data. Tony ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP 2008-05-16 17:55 ` Tony Lindgren @ 2008-05-19 9:50 ` Kamat, Nishant 2008-05-21 15:51 ` Tony Lindgren 0 siblings, 1 reply; 10+ messages in thread From: Kamat, Nishant @ 2008-05-19 9:50 UTC (permalink / raw) To: Tony Lindgren; +Cc: linux-omap Tony, > From: Tony Lindgren [mailto:tony@atomide.com] > > * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > > > +#define DEBUG_BASE 0x08000000 > > + > > +#define OMAP34XX_ETHR_START DEBUG_BASE > > +#define LDP_SMC911X_CS 1 > > +#define LDP_SMC911X_GPIO 152 > > + > > These redefines will conflict when compiling in support for multiple > boards. They should be passed in the platform_data. > If I understand correctly, the problem is about using the same #define names as 3430 SDP, right? How about this patch: ------------------------------------ From: Nishant Kamat <nskamat@ti.com> This patch adds ethernet support (smc911x) for OMAP LDP platform. Signed-off-by: Nishant Kamat <nskamat@ti.com> --- arch/arm/configs/omap_ldp_defconfig | 164 ++++++++++++++++++++++++++++++++- arch/arm/mach-omap2/board-ldp.c | 51 ++++++++++ include/asm-arm/arch-omap/board-ldp.h | 4 + 3 files changed, 216 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index 9a90975..fb2880b 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc2-omap1 -# Thu May 15 19:08:39 2008 +# Thu May 15 19:09:22 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -37,8 +37,11 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set @@ -319,7 +322,86 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking # -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -335,18 +417,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_OMAP_STI is not set @@ -388,12 +473,61 @@ CONFIG_SCSI_WAIT_SCAN=m # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # # Input device support @@ -615,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set # # Multimedia drivers @@ -926,12 +1061,14 @@ CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y @@ -985,6 +1122,26 @@ CONFIG_TMPFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types @@ -1047,6 +1204,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set # # Kernel hacking diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 2ac4c9b..f29c62d 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -46,6 +46,26 @@ #define TWL4030_MSECURE_GPIO 22 +static struct resource ldp_smc911x_resources[] = { + [0] = { + .start = LDP_ETHR_START, + .end = LDP_ETHR_START + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device ldp_smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(ldp_smc911x_resources), + .resource = ldp_smc911x_resources, +}; + static int ts_gpio; #ifdef CONFIG_RTC_DRV_TWL4030 @@ -184,16 +204,47 @@ static struct spi_board_info ldp_spi_board_info[] __initdata = { }; static struct platform_device *ldp_devices[] __initdata = { + &ldp_smc911x_device, #ifdef CONFIG_RTC_DRV_TWL4030 &ldp_twl4030rtc_device, #endif }; +static inline void __init ldp_init_smc911x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + int eth_gpio = 0; + + eth_cs = LDP_SMC911X_CS; + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc911x\n"); + return; + } + + ldp_smc911x_resources[0].start = cs_mem_base + 0x0; + ldp_smc911x_resources[0].end = cs_mem_base + 0xf; + udelay(100); + + eth_gpio = LDP_SMC911X_GPIO; + + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + + if (omap_request_gpio(eth_gpio) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + eth_gpio); + return; + } + omap_set_gpio_direction(eth_gpio, 1); +} + static void __init omap_ldp_init_irq(void) { omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); + ldp_init_smc911x(); } static struct omap_uart_config ldp_uart_config __initdata = { diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h index b227561..b6197b0 100644 --- a/include/asm-arm/arch-omap/board-ldp.h +++ b/include/asm-arm/arch-omap/board-ldp.h @@ -29,6 +29,10 @@ #ifndef __ASM_ARCH_OMAP_LDP_H #define __ASM_ARCH_OMAP_LDP_H +#define LDP_ETHR_START 0x08000000 +#define LDP_SMC911X_CS 1 +#define LDP_SMC911X_GPIO 152 + #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ #endif /* __ASM_ARCH_OMAP_LDP_H */ -- 1.5.3.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP 2008-05-19 9:50 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP Kamat, Nishant @ 2008-05-21 15:51 ` Tony Lindgren 0 siblings, 0 replies; 10+ messages in thread From: Tony Lindgren @ 2008-05-21 15:51 UTC (permalink / raw) To: Kamat, Nishant; +Cc: linux-omap * Kamat, Nishant <nskamat@ti.com> [080519 02:50]: > Tony, > > > From: Tony Lindgren [mailto:tony@atomide.com] > > > > * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > > > > > +#define DEBUG_BASE 0x08000000 > > > + > > > +#define OMAP34XX_ETHR_START DEBUG_BASE > > > +#define LDP_SMC911X_CS 1 > > > +#define LDP_SMC911X_GPIO 152 > > > + > > > > These redefines will conflict when compiling in support for multiple > > boards. They should be passed in the platform_data. > > > > If I understand correctly, the problem is about using the same #define > names as 3430 SDP, right? How about this patch: Yeah that's the problem. Can you please send the defconfig changes in a separate patch? Tony > ------------------------------------ > From: Nishant Kamat <nskamat@ti.com> > > This patch adds ethernet support (smc911x) for OMAP LDP platform. > > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > arch/arm/configs/omap_ldp_defconfig | 164 > ++++++++++++++++++++++++++++++++- > arch/arm/mach-omap2/board-ldp.c | 51 ++++++++++ > include/asm-arm/arch-omap/board-ldp.h | 4 + > 3 files changed, 216 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/configs/omap_ldp_defconfig > b/arch/arm/configs/omap_ldp_defconfig > index 9a90975..fb2880b 100644 > --- a/arch/arm/configs/omap_ldp_defconfig > +++ b/arch/arm/configs/omap_ldp_defconfig > @@ -1,7 +1,7 @@ > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.26-rc2-omap1 > -# Thu May 15 19:08:39 2008 > +# Thu May 15 19:09:22 2008 > # > CONFIG_ARM=y > CONFIG_SYS_SUPPORTS_APM_EMULATION=y > @@ -37,8 +37,11 @@ CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_SYSVIPC_SYSCTL=y > +# CONFIG_POSIX_MQUEUE is not set > CONFIG_BSD_PROCESS_ACCT=y > # CONFIG_BSD_PROCESS_ACCT_V3 is not set > +# CONFIG_TASKSTATS is not set > +# CONFIG_AUDIT is not set > # CONFIG_IKCONFIG is not set > CONFIG_LOG_BUF_SHIFT=14 > # CONFIG_CGROUPS is not set > @@ -319,7 +322,86 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y > # > # Networking > # > -# CONFIG_NET is not set > +CONFIG_NET=y > + > +# > +# Networking options > +# > +CONFIG_PACKET=y > +# CONFIG_PACKET_MMAP is not set > +CONFIG_UNIX=y > +CONFIG_XFRM=y > +# CONFIG_XFRM_USER is not set > +# CONFIG_XFRM_SUB_POLICY is not set > +# CONFIG_XFRM_MIGRATE is not set > +# CONFIG_XFRM_STATISTICS is not set > +CONFIG_NET_KEY=y > +# CONFIG_NET_KEY_MIGRATE is not set > +CONFIG_INET=y > +# CONFIG_IP_MULTICAST is not set > +# CONFIG_IP_ADVANCED_ROUTER is not set > +CONFIG_IP_FIB_HASH=y > +CONFIG_IP_PNP=y > +CONFIG_IP_PNP_DHCP=y > +CONFIG_IP_PNP_BOOTP=y > +CONFIG_IP_PNP_RARP=y > +# CONFIG_NET_IPIP is not set > +# CONFIG_NET_IPGRE is not set > +# CONFIG_ARPD is not set > +# CONFIG_SYN_COOKIES is not set > +# CONFIG_INET_AH is not set > +# CONFIG_INET_ESP is not set > +# CONFIG_INET_IPCOMP is not set > +# CONFIG_INET_XFRM_TUNNEL is not set > +# CONFIG_INET_TUNNEL is not set > +CONFIG_INET_XFRM_MODE_TRANSPORT=y > +CONFIG_INET_XFRM_MODE_TUNNEL=y > +CONFIG_INET_XFRM_MODE_BEET=y > +# CONFIG_INET_LRO is not set > +CONFIG_INET_DIAG=y > +CONFIG_INET_TCP_DIAG=y > +# CONFIG_TCP_CONG_ADVANCED is not set > +CONFIG_TCP_CONG_CUBIC=y > +CONFIG_DEFAULT_TCP_CONG="cubic" > +# CONFIG_TCP_MD5SIG is not set > +# CONFIG_IPV6 is not set > +# CONFIG_NETWORK_SECMARK is not set > +# CONFIG_NETFILTER is not set > +# CONFIG_IP_DCCP is not set > +# CONFIG_IP_SCTP is not set > +# CONFIG_TIPC is not set > +# CONFIG_ATM is not set > +# CONFIG_BRIDGE is not set > +# CONFIG_VLAN_8021Q is not set > +# CONFIG_DECNET is not set > +# CONFIG_LLC2 is not set > +# CONFIG_IPX is not set > +# CONFIG_ATALK is not set > +# CONFIG_X25 is not set > +# CONFIG_LAPB is not set > +# CONFIG_ECONET is not set > +# CONFIG_WAN_ROUTER is not set > +# CONFIG_NET_SCHED is not set > + > +# > +# Network testing > +# > +# CONFIG_NET_PKTGEN is not set > +# CONFIG_HAMRADIO is not set > +# CONFIG_CAN is not set > +# CONFIG_IRDA is not set > +# CONFIG_BT is not set > +# CONFIG_AF_RXRPC is not set > + > +# > +# Wireless > +# > +# CONFIG_CFG80211 is not set > +# CONFIG_WIRELESS_EXT is not set > +# CONFIG_MAC80211 is not set > +# CONFIG_IEEE80211 is not set > +# CONFIG_RFKILL is not set > +# CONFIG_NET_9P is not set > > # > # Device Drivers > @@ -335,18 +417,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y > # CONFIG_DEBUG_DRIVER is not set > # CONFIG_DEBUG_DEVRES is not set > # CONFIG_SYS_HYPERVISOR is not set > +# CONFIG_CONNECTOR is not set > # CONFIG_MTD is not set > # CONFIG_PARPORT is not set > CONFIG_BLK_DEV=y > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=y > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > +# CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_UB is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=16384 > # CONFIG_BLK_DEV_XIP is not set > # CONFIG_CDROM_PKTCDVD is not set > +# CONFIG_ATA_OVER_ETH is not set > CONFIG_MISC_DEVICES=y > # CONFIG_EEPROM_93CX6 is not set > # CONFIG_OMAP_STI is not set > @@ -388,12 +473,61 @@ CONFIG_SCSI_WAIT_SCAN=m > # > # CONFIG_SCSI_SPI_ATTRS is not set > # CONFIG_SCSI_FC_ATTRS is not set > +# CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_LIBSAS is not set > # CONFIG_SCSI_SRP_ATTRS is not set > CONFIG_SCSI_LOWLEVEL=y > +# CONFIG_ISCSI_TCP is not set > # CONFIG_SCSI_DEBUG is not set > # CONFIG_ATA is not set > # CONFIG_MD is not set > +CONFIG_NETDEVICES=y > +# CONFIG_NETDEVICES_MULTIQUEUE is not set > +# CONFIG_DUMMY is not set > +# CONFIG_BONDING is not set > +# CONFIG_MACVLAN is not set > +# CONFIG_EQUALIZER is not set > +# CONFIG_TUN is not set > +# CONFIG_VETH is not set > +# CONFIG_PHYLIB is not set > +CONFIG_NET_ETHERNET=y > +CONFIG_MII=y > +# CONFIG_AX88796 is not set > +# CONFIG_SMC91X is not set > +# CONFIG_DM9000 is not set > +# CONFIG_ENC28J60 is not set > +CONFIG_SMC911X=y > +# CONFIG_IBM_NEW_EMAC_ZMII is not set > +# CONFIG_IBM_NEW_EMAC_RGMII is not set > +# CONFIG_IBM_NEW_EMAC_TAH is not set > +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set > +# CONFIG_B44 is not set > +CONFIG_NETDEV_1000=y > +# CONFIG_E1000E_ENABLED is not set > +CONFIG_NETDEV_10000=y > + > +# > +# Wireless LAN > +# > +# CONFIG_WLAN_PRE80211 is not set > +# CONFIG_WLAN_80211 is not set > +# CONFIG_IWLWIFI_LEDS is not set > + > +# > +# USB Network Adapters > +# > +# CONFIG_USB_CATC is not set > +# CONFIG_USB_KAWETH is not set > +# CONFIG_USB_PEGASUS is not set > +# CONFIG_USB_RTL8150 is not set > +# CONFIG_USB_USBNET is not set > +# CONFIG_WAN is not set > +# CONFIG_PPP is not set > +# CONFIG_SLIP is not set > +# CONFIG_NETCONSOLE is not set > +# CONFIG_NETPOLL is not set > +# CONFIG_NET_POLL_CONTROLLER is not set > +# CONFIG_ISDN is not set > > # > # Input device support > @@ -615,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y > # Multimedia core support > # > # CONFIG_VIDEO_DEV is not set > +# CONFIG_DVB_CORE is not set > > # > # Multimedia drivers > @@ -926,12 +1061,14 @@ CONFIG_EXT3_FS=y > CONFIG_JBD=y > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > -# CONFIG_FS_POSIX_ACL is not set > +CONFIG_FS_POSIX_ACL=y > # CONFIG_XFS_FS is not set > +# CONFIG_OCFS2_FS is not set > CONFIG_DNOTIFY=y > CONFIG_INOTIFY=y > CONFIG_INOTIFY_USER=y > CONFIG_QUOTA=y > +# CONFIG_QUOTA_NETLINK_INTERFACE is not set > CONFIG_PRINT_QUOTA_WARNING=y > # CONFIG_QFMT_V1 is not set > CONFIG_QFMT_V2=y > @@ -985,6 +1122,26 @@ CONFIG_TMPFS=y > # CONFIG_ROMFS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > +CONFIG_NETWORK_FILESYSTEMS=y > +CONFIG_NFS_FS=y > +CONFIG_NFS_V3=y > +CONFIG_NFS_V3_ACL=y > +# CONFIG_NFS_V4 is not set > +# CONFIG_NFSD is not set > +CONFIG_ROOT_NFS=y > +CONFIG_LOCKD=y > +CONFIG_LOCKD_V4=y > +CONFIG_NFS_ACL_SUPPORT=y > +CONFIG_NFS_COMMON=y > +CONFIG_SUNRPC=y > +# CONFIG_SUNRPC_BIND34 is not set > +# CONFIG_RPCSEC_GSS_KRB5 is not set > +# CONFIG_RPCSEC_GSS_SPKM3 is not set > +# CONFIG_SMB_FS is not set > +# CONFIG_CIFS is not set > +# CONFIG_NCP_FS is not set > +# CONFIG_CODA_FS is not set > +# CONFIG_AFS_FS is not set > > # > # Partition Types > @@ -1047,6 +1204,7 @@ CONFIG_NLS_ISO8859_1=y > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > +# CONFIG_DLM is not set > > # > # Kernel hacking > diff --git a/arch/arm/mach-omap2/board-ldp.c > b/arch/arm/mach-omap2/board-ldp.c > index 2ac4c9b..f29c62d 100644 > --- a/arch/arm/mach-omap2/board-ldp.c > +++ b/arch/arm/mach-omap2/board-ldp.c > @@ -46,6 +46,26 @@ > > #define TWL4030_MSECURE_GPIO 22 > > +static struct resource ldp_smc911x_resources[] = { > + [0] = { > + .start = LDP_ETHR_START, > + .end = LDP_ETHR_START + SZ_4K, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = 0, > + .end = 0, > + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, > + }, > +}; > + > +static struct platform_device ldp_smc911x_device = { > + .name = "smc911x", > + .id = -1, > + .num_resources = ARRAY_SIZE(ldp_smc911x_resources), > + .resource = ldp_smc911x_resources, > +}; > + > static int ts_gpio; > > #ifdef CONFIG_RTC_DRV_TWL4030 > @@ -184,16 +204,47 @@ static struct spi_board_info ldp_spi_board_info[] > __initdata = { > }; > > static struct platform_device *ldp_devices[] __initdata = { > + &ldp_smc911x_device, > #ifdef CONFIG_RTC_DRV_TWL4030 > &ldp_twl4030rtc_device, > #endif > }; > > +static inline void __init ldp_init_smc911x(void) > +{ > + int eth_cs; > + unsigned long cs_mem_base; > + int eth_gpio = 0; > + > + eth_cs = LDP_SMC911X_CS; > + > + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { > + printk(KERN_ERR "Failed to request GPMC mem for > smc911x\n"); > + return; > + } > + > + ldp_smc911x_resources[0].start = cs_mem_base + 0x0; > + ldp_smc911x_resources[0].end = cs_mem_base + 0xf; > + udelay(100); > + > + eth_gpio = LDP_SMC911X_GPIO; > + > + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); > + > + if (omap_request_gpio(eth_gpio) < 0) { > + printk(KERN_ERR "Failed to request GPIO%d for smc911x > IRQ\n", > + eth_gpio); > + return; > + } > + omap_set_gpio_direction(eth_gpio, 1); > +} > + > static void __init omap_ldp_init_irq(void) > { > omap2_init_common_hw(); > omap_init_irq(); > omap_gpio_init(); > + ldp_init_smc911x(); > } > > static struct omap_uart_config ldp_uart_config __initdata = { > diff --git a/include/asm-arm/arch-omap/board-ldp.h > b/include/asm-arm/arch-omap/board-ldp.h > index b227561..b6197b0 100644 > --- a/include/asm-arm/arch-omap/board-ldp.h > +++ b/include/asm-arm/arch-omap/board-ldp.h > @@ -29,6 +29,10 @@ > #ifndef __ASM_ARCH_OMAP_LDP_H > #define __ASM_ARCH_OMAP_LDP_H > > +#define LDP_ETHR_START 0x08000000 > +#define LDP_SMC911X_CS 1 > +#define LDP_SMC911X_GPIO 152 > + > #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ > > #endif /* __ASM_ARCH_OMAP_LDP_H */ > -- > 1.5.3.2 ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support " Nishant Kamat @ 2008-05-16 17:54 ` Tony Lindgren 1 sibling, 0 replies; 10+ messages in thread From: Tony Lindgren @ 2008-05-16 17:54 UTC (permalink / raw) To: Nishant Kamat; +Cc: linux-omap * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > This patch adds a default config for the OMAP LDP platform. It supports > UART, touchscreen, RTC, Mentor USB and MMC drivers. Pushing. Tony > > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > arch/arm/configs/omap_ldp_defconfig | 1196 +++++++++++++++++++++++++++++++++++ > 1 files changed, 1196 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/configs/omap_ldp_defconfig > > diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig > new file mode 100644 > index 0000000..9a90975 > --- /dev/null > +++ b/arch/arm/configs/omap_ldp_defconfig > @@ -0,0 +1,1196 @@ > +# > +# Automatically generated make config: don't edit > +# Linux kernel version: 2.6.26-rc2-omap1 > +# Thu May 15 19:08:39 2008 > +# > +CONFIG_ARM=y > +CONFIG_SYS_SUPPORTS_APM_EMULATION=y > +CONFIG_GENERIC_GPIO=y > +CONFIG_GENERIC_TIME=y > +CONFIG_GENERIC_CLOCKEVENTS=y > +CONFIG_MMU=y > +# CONFIG_NO_IOPORT is not set > +CONFIG_GENERIC_HARDIRQS=y > +CONFIG_STACKTRACE_SUPPORT=y > +CONFIG_LOCKDEP_SUPPORT=y > +CONFIG_TRACE_IRQFLAGS_SUPPORT=y > +CONFIG_HARDIRQS_SW_RESEND=y > +CONFIG_GENERIC_IRQ_PROBE=y > +CONFIG_RWSEM_GENERIC_SPINLOCK=y > +# CONFIG_ARCH_HAS_ILOG2_U32 is not set > +# CONFIG_ARCH_HAS_ILOG2_U64 is not set > +CONFIG_GENERIC_HWEIGHT=y > +CONFIG_GENERIC_CALIBRATE_DELAY=y > +CONFIG_ARCH_SUPPORTS_AOUT=y > +CONFIG_ZONE_DMA=y > +CONFIG_VECTORS_BASE=0xffff0000 > +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > + > +# > +# General setup > +# > +CONFIG_EXPERIMENTAL=y > +CONFIG_BROKEN_ON_SMP=y > +CONFIG_INIT_ENV_ARG_LIMIT=32 > +CONFIG_LOCALVERSION="" > +CONFIG_LOCALVERSION_AUTO=y > +CONFIG_SWAP=y > +CONFIG_SYSVIPC=y > +CONFIG_SYSVIPC_SYSCTL=y > +CONFIG_BSD_PROCESS_ACCT=y > +# CONFIG_BSD_PROCESS_ACCT_V3 is not set > +# CONFIG_IKCONFIG is not set > +CONFIG_LOG_BUF_SHIFT=14 > +# CONFIG_CGROUPS is not set > +CONFIG_GROUP_SCHED=y > +CONFIG_FAIR_GROUP_SCHED=y > +# CONFIG_RT_GROUP_SCHED is not set > +CONFIG_USER_SCHED=y > +# CONFIG_CGROUP_SCHED is not set > +CONFIG_SYSFS_DEPRECATED=y > +CONFIG_SYSFS_DEPRECATED_V2=y > +# CONFIG_RELAY is not set > +# CONFIG_NAMESPACES is not set > +CONFIG_BLK_DEV_INITRD=y > +CONFIG_INITRAMFS_SOURCE="" > +CONFIG_CC_OPTIMIZE_FOR_SIZE=y > +CONFIG_SYSCTL=y > +CONFIG_EMBEDDED=y > +CONFIG_UID16=y > +# CONFIG_SYSCTL_SYSCALL is not set > +CONFIG_KALLSYMS=y > +# CONFIG_KALLSYMS_ALL is not set > +CONFIG_KALLSYMS_EXTRA_PASS=y > +CONFIG_HOTPLUG=y > +CONFIG_PRINTK=y > +CONFIG_BUG=y > +CONFIG_ELF_CORE=y > +CONFIG_COMPAT_BRK=y > +CONFIG_BASE_FULL=y > +CONFIG_FUTEX=y > +CONFIG_ANON_INODES=y > +CONFIG_EPOLL=y > +CONFIG_SIGNALFD=y > +CONFIG_TIMERFD=y > +CONFIG_EVENTFD=y > +CONFIG_SHMEM=y > +CONFIG_VM_EVENT_COUNTERS=y > +CONFIG_SLAB=y > +# CONFIG_SLUB is not set > +# CONFIG_SLOB is not set > +# CONFIG_PROFILING is not set > +# CONFIG_MARKERS is not set > +CONFIG_HAVE_OPROFILE=y > +# CONFIG_KPROBES is not set > +CONFIG_HAVE_KPROBES=y > +CONFIG_HAVE_KRETPROBES=y > +# CONFIG_HAVE_DMA_ATTRS is not set > +CONFIG_PROC_PAGE_MONITOR=y > +CONFIG_SLABINFO=y > +CONFIG_RT_MUTEXES=y > +# CONFIG_TINY_SHMEM is not set > +CONFIG_BASE_SMALL=0 > +CONFIG_MODULES=y > +# CONFIG_MODULE_FORCE_LOAD is not set > +CONFIG_MODULE_UNLOAD=y > +# CONFIG_MODULE_FORCE_UNLOAD is not set > +CONFIG_MODVERSIONS=y > +CONFIG_MODULE_SRCVERSION_ALL=y > +CONFIG_KMOD=y > +CONFIG_BLOCK=y > +# CONFIG_LBD is not set > +# CONFIG_BLK_DEV_IO_TRACE is not set > +# CONFIG_LSF is not set > +# CONFIG_BLK_DEV_BSG is not set > + > +# > +# IO Schedulers > +# > +CONFIG_IOSCHED_NOOP=y > +CONFIG_IOSCHED_AS=y > +CONFIG_IOSCHED_DEADLINE=y > +CONFIG_IOSCHED_CFQ=y > +CONFIG_DEFAULT_AS=y > +# CONFIG_DEFAULT_DEADLINE is not set > +# CONFIG_DEFAULT_CFQ is not set > +# CONFIG_DEFAULT_NOOP is not set > +CONFIG_DEFAULT_IOSCHED="anticipatory" > +CONFIG_CLASSIC_RCU=y > + > +# > +# System Type > +# > +# CONFIG_ARCH_AAEC2000 is not set > +# CONFIG_ARCH_INTEGRATOR is not set > +# CONFIG_ARCH_REALVIEW is not set > +# CONFIG_ARCH_VERSATILE is not set > +# CONFIG_ARCH_AT91 is not set > +# CONFIG_ARCH_CLPS7500 is not set > +# CONFIG_ARCH_CLPS711X is not set > +# CONFIG_ARCH_CO285 is not set > +# CONFIG_ARCH_EBSA110 is not set > +# CONFIG_ARCH_EP93XX is not set > +# CONFIG_ARCH_FOOTBRIDGE is not set > +# CONFIG_ARCH_NETX is not set > +# CONFIG_ARCH_H720X is not set > +# CONFIG_ARCH_IMX is not set > +# CONFIG_ARCH_IOP13XX is not set > +# CONFIG_ARCH_IOP32X is not set > +# CONFIG_ARCH_IOP33X is not set > +# CONFIG_ARCH_IXP23XX is not set > +# CONFIG_ARCH_IXP2000 is not set > +# CONFIG_ARCH_IXP4XX is not set > +# CONFIG_ARCH_L7200 is not set > +# CONFIG_ARCH_KS8695 is not set > +# CONFIG_ARCH_NS9XXX is not set > +# CONFIG_ARCH_MXC is not set > +# CONFIG_ARCH_ORION5X is not set > +# CONFIG_ARCH_PNX4008 is not set > +# CONFIG_ARCH_PXA is not set > +# CONFIG_ARCH_RPC is not set > +# CONFIG_ARCH_SA1100 is not set > +# CONFIG_ARCH_S3C2410 is not set > +# CONFIG_ARCH_SHARK is not set > +# CONFIG_ARCH_LH7A40X is not set > +# CONFIG_ARCH_DAVINCI is not set > +CONFIG_ARCH_OMAP=y > +# CONFIG_ARCH_MSM7X00A is not set > + > +# > +# TI OMAP Implementations > +# > +CONFIG_ARCH_OMAP_OTG=y > +# CONFIG_ARCH_OMAP1 is not set > +# CONFIG_ARCH_OMAP2 is not set > +CONFIG_ARCH_OMAP3=y > + > +# > +# OMAP Feature Selections > +# > +CONFIG_OMAP_DEBUG_SRAM_PATCH=y > +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set > +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set > +# CONFIG_OMAP_RESET_CLOCKS is not set > +CONFIG_OMAP_BOOT_TAG=y > +CONFIG_OMAP_BOOT_REASON=y > +# CONFIG_OMAP_COMPONENT_VERSION is not set > +# CONFIG_OMAP_GPIO_SWITCH is not set > +CONFIG_OMAP_MUX=y > +CONFIG_OMAP_MUX_DEBUG=y > +CONFIG_OMAP_MUX_WARNINGS=y > +CONFIG_OMAP_MCBSP=y > +# CONFIG_OMAP_MMU_FWK is not set > +# CONFIG_OMAP_MBOX_FWK is not set > +# CONFIG_OMAP_MPU_TIMER is not set > +CONFIG_OMAP_32K_TIMER=y > +CONFIG_OMAP_32K_TIMER_HZ=128 > +CONFIG_OMAP_DM_TIMER=y > +# CONFIG_OMAP_LL_DEBUG_UART1 is not set > +# CONFIG_OMAP_LL_DEBUG_UART2 is not set > +CONFIG_OMAP_LL_DEBUG_UART3=y > +CONFIG_OMAP_SERIAL_WAKE=y > +CONFIG_ARCH_OMAP34XX=y > +CONFIG_ARCH_OMAP3430=y > + > +# > +# OMAP Board Type > +# > +CONFIG_MACH_OMAP_LDP=y > +# CONFIG_MACH_OMAP_3430SDP is not set > +# CONFIG_MACH_OMAP3EVM is not set > +# CONFIG_MACH_OMAP3_BEAGLE is not set > + > +# > +# Boot options > +# > + > +# > +# Power management > +# > + > +# > +# Processor Type > +# > +CONFIG_CPU_32=y > +CONFIG_CPU_32v6K=y > +CONFIG_CPU_V7=y > +CONFIG_CPU_32v7=y > +CONFIG_CPU_ABRT_EV7=y > +CONFIG_CPU_PABRT_IFAR=y > +CONFIG_CPU_CACHE_V7=y > +CONFIG_CPU_CACHE_VIPT=y > +CONFIG_CPU_COPY_V6=y > +CONFIG_CPU_TLB_V7=y > +CONFIG_CPU_HAS_ASID=y > +CONFIG_CPU_CP15=y > +CONFIG_CPU_CP15_MMU=y > + > +# > +# Processor Features > +# > +CONFIG_ARM_THUMB=y > +# CONFIG_ARM_THUMBEE is not set > +# CONFIG_CPU_ICACHE_DISABLE is not set > +# CONFIG_CPU_DCACHE_DISABLE is not set > +# CONFIG_CPU_BPREDICT_DISABLE is not set > +CONFIG_HAS_TLS_REG=y > +# CONFIG_OUTER_CACHE is not set > + > +# > +# Bus support > +# > +# CONFIG_PCI_SYSCALL is not set > +# CONFIG_ARCH_SUPPORTS_MSI is not set > +# CONFIG_PCCARD is not set > + > +# > +# Kernel Features > +# > +CONFIG_TICK_ONESHOT=y > +CONFIG_NO_HZ=y > +CONFIG_HIGH_RES_TIMERS=y > +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y > +# CONFIG_PREEMPT is not set > +CONFIG_HZ=128 > +CONFIG_AEABI=y > +CONFIG_OABI_COMPAT=y > +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set > +CONFIG_SELECT_MEMORY_MODEL=y > +CONFIG_FLATMEM_MANUAL=y > +# CONFIG_DISCONTIGMEM_MANUAL is not set > +# CONFIG_SPARSEMEM_MANUAL is not set > +CONFIG_FLATMEM=y > +CONFIG_FLAT_NODE_MEM_MAP=y > +# CONFIG_SPARSEMEM_STATIC is not set > +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set > +CONFIG_PAGEFLAGS_EXTENDED=y > +CONFIG_SPLIT_PTLOCK_CPUS=4 > +# CONFIG_RESOURCES_64BIT is not set > +CONFIG_ZONE_DMA_FLAG=1 > +CONFIG_BOUNCE=y > +CONFIG_VIRT_TO_BUS=y > +# CONFIG_LEDS is not set > +CONFIG_ALIGNMENT_TRAP=y > + > +# > +# Boot options > +# > +CONFIG_ZBOOT_ROM_TEXT=0x0 > +CONFIG_ZBOOT_ROM_BSS=0x0 > +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" > +# CONFIG_XIP_KERNEL is not set > +# CONFIG_KEXEC is not set > + > +# > +# CPU Frequency scaling > +# > +# CONFIG_CPU_FREQ is not set > + > +# > +# Floating point emulation > +# > + > +# > +# At least one emulation must be selected > +# > +CONFIG_FPE_NWFPE=y > +# CONFIG_FPE_NWFPE_XP is not set > +# CONFIG_FPE_FASTFPE is not set > +CONFIG_VFP=y > +CONFIG_VFPv3=y > +# CONFIG_NEON is not set > + > +# > +# Userspace binary formats > +# > +CONFIG_BINFMT_ELF=y > +# CONFIG_BINFMT_AOUT is not set > +CONFIG_BINFMT_MISC=y > + > +# > +# Power management options > +# > +CONFIG_PM=y > +# CONFIG_PM_DEBUG is not set > +# CONFIG_SUSPEND is not set > +# CONFIG_APM_EMULATION is not set > +CONFIG_ARCH_SUSPEND_POSSIBLE=y > + > +# > +# Networking > +# > +# CONFIG_NET is not set > + > +# > +# Device Drivers > +# > + > +# > +# Generic Driver Options > +# > +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" > +CONFIG_STANDALONE=y > +CONFIG_PREVENT_FIRMWARE_BUILD=y > +# CONFIG_FW_LOADER is not set > +# CONFIG_DEBUG_DRIVER is not set > +# CONFIG_DEBUG_DEVRES is not set > +# CONFIG_SYS_HYPERVISOR is not set > +# CONFIG_MTD is not set > +# CONFIG_PARPORT is not set > +CONFIG_BLK_DEV=y > +# CONFIG_BLK_DEV_COW_COMMON is not set > +CONFIG_BLK_DEV_LOOP=y > +# CONFIG_BLK_DEV_CRYPTOLOOP is not set > +# CONFIG_BLK_DEV_UB is not set > +CONFIG_BLK_DEV_RAM=y > +CONFIG_BLK_DEV_RAM_COUNT=16 > +CONFIG_BLK_DEV_RAM_SIZE=16384 > +# CONFIG_BLK_DEV_XIP is not set > +# CONFIG_CDROM_PKTCDVD is not set > +CONFIG_MISC_DEVICES=y > +# CONFIG_EEPROM_93CX6 is not set > +# CONFIG_OMAP_STI is not set > +# CONFIG_ENCLOSURE_SERVICES is not set > +CONFIG_HAVE_IDE=y > +# CONFIG_IDE is not set > + > +# > +# SCSI device support > +# > +# CONFIG_RAID_ATTRS is not set > +CONFIG_SCSI=y > +CONFIG_SCSI_DMA=y > +# CONFIG_SCSI_TGT is not set > +# CONFIG_SCSI_NETLINK is not set > +CONFIG_SCSI_PROC_FS=y > + > +# > +# SCSI support type (disk, tape, CD-ROM) > +# > +CONFIG_BLK_DEV_SD=y > +# CONFIG_CHR_DEV_ST is not set > +# CONFIG_CHR_DEV_OSST is not set > +# CONFIG_BLK_DEV_SR is not set > +# CONFIG_CHR_DEV_SG is not set > +# CONFIG_CHR_DEV_SCH is not set > + > +# > +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs > +# > +# CONFIG_SCSI_MULTI_LUN is not set > +# CONFIG_SCSI_CONSTANTS is not set > +# CONFIG_SCSI_LOGGING is not set > +# CONFIG_SCSI_SCAN_ASYNC is not set > +CONFIG_SCSI_WAIT_SCAN=m > + > +# > +# SCSI Transports > +# > +# CONFIG_SCSI_SPI_ATTRS is not set > +# CONFIG_SCSI_FC_ATTRS is not set > +# CONFIG_SCSI_SAS_LIBSAS is not set > +# CONFIG_SCSI_SRP_ATTRS is not set > +CONFIG_SCSI_LOWLEVEL=y > +# CONFIG_SCSI_DEBUG is not set > +# CONFIG_ATA is not set > +# CONFIG_MD is not set > + > +# > +# Input device support > +# > +CONFIG_INPUT=y > +# CONFIG_INPUT_FF_MEMLESS is not set > +# CONFIG_INPUT_POLLDEV is not set > + > +# > +# Userland interfaces > +# > +# CONFIG_INPUT_MOUSEDEV is not set > +# CONFIG_INPUT_JOYDEV is not set > +CONFIG_INPUT_EVDEV=y > +# CONFIG_INPUT_EVBUG is not set > + > +# > +# Input Device Drivers > +# > +# CONFIG_INPUT_KEYBOARD is not set > +# CONFIG_INPUT_MOUSE is not set > +# CONFIG_INPUT_JOYSTICK is not set > +# CONFIG_INPUT_TABLET is not set > +CONFIG_INPUT_TOUCHSCREEN=y > +CONFIG_TOUCHSCREEN_ADS7846=y > +# CONFIG_TOUCHSCREEN_FUJITSU is not set > +# CONFIG_TOUCHSCREEN_GUNZE is not set > +# CONFIG_TOUCHSCREEN_ELO is not set > +# CONFIG_TOUCHSCREEN_MTOUCH is not set > +# CONFIG_TOUCHSCREEN_MK712 is not set > +# CONFIG_TOUCHSCREEN_PENMOUNT is not set > +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set > +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set > +# CONFIG_TOUCHSCREEN_TSC2005 is not set > +# CONFIG_TOUCHSCREEN_TSC2102 is not set > +# CONFIG_TOUCHSCREEN_TSC210X is not set > +# CONFIG_TOUCHSCREEN_UCB1400 is not set > +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set > +# CONFIG_INPUT_MISC is not set > + > +# > +# Hardware I/O ports > +# > +# CONFIG_SERIO is not set > +# CONFIG_GAMEPORT is not set > + > +# > +# Character devices > +# > +CONFIG_VT=y > +CONFIG_VT_CONSOLE=y > +CONFIG_HW_CONSOLE=y > +# CONFIG_VT_HW_CONSOLE_BINDING is not set > +CONFIG_DEVKMEM=y > +# CONFIG_SERIAL_NONSTANDARD is not set > + > +# > +# Serial drivers > +# > +CONFIG_SERIAL_8250=y > +CONFIG_SERIAL_8250_CONSOLE=y > +CONFIG_SERIAL_8250_NR_UARTS=32 > +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > +CONFIG_SERIAL_8250_EXTENDED=y > +CONFIG_SERIAL_8250_MANY_PORTS=y > +CONFIG_SERIAL_8250_SHARE_IRQ=y > +CONFIG_SERIAL_8250_DETECT_IRQ=y > +CONFIG_SERIAL_8250_RSA=y > + > +# > +# Non-8250 serial port support > +# > +CONFIG_SERIAL_CORE=y > +CONFIG_SERIAL_CORE_CONSOLE=y > +CONFIG_UNIX98_PTYS=y > +# CONFIG_LEGACY_PTYS is not set > +# CONFIG_IPMI_HANDLER is not set > +CONFIG_HW_RANDOM=y > +# CONFIG_NVRAM is not set > +# CONFIG_R3964 is not set > +# CONFIG_RAW_DRIVER is not set > +# CONFIG_TCG_TPM is not set > +CONFIG_I2C=y > +CONFIG_I2C_BOARDINFO=y > +CONFIG_I2C_CHARDEV=y > + > +# > +# I2C Hardware Bus support > +# > +# CONFIG_I2C_GPIO is not set > +# CONFIG_I2C_OCORES is not set > +CONFIG_I2C_OMAP=y > +# CONFIG_I2C_PARPORT_LIGHT is not set > +# CONFIG_I2C_SIMTEC is not set > +# CONFIG_I2C_TAOS_EVM is not set > +# CONFIG_I2C_STUB is not set > +# CONFIG_I2C_TINY_USB is not set > +# CONFIG_I2C_PCA_PLATFORM is not set > + > +# > +# Miscellaneous I2C Chip support > +# > +# CONFIG_DS1682 is not set > +# CONFIG_SENSORS_EEPROM is not set > +# CONFIG_SENSORS_PCF8574 is not set > +# CONFIG_PCF8575 is not set > +# CONFIG_SENSORS_PCF8591 is not set > +# CONFIG_ISP1301_OMAP is not set > +# CONFIG_TPS65010 is not set > +# CONFIG_SENSORS_TLV320AIC23 is not set > +CONFIG_TWL4030_CORE=y > +CONFIG_TWL4030_GPIO=y > +CONFIG_TWL4030_MADC=y > +# CONFIG_TWL4030_USB is not set > +# CONFIG_TWL4030_PWRBUTTON is not set > +# CONFIG_TWL4030_POWEROFF is not set > +# CONFIG_SENSORS_MAX6875 is not set > +# CONFIG_SENSORS_TSL2550 is not set > +# CONFIG_LP5521 is not set > +# CONFIG_I2C_DEBUG_CORE is not set > +# CONFIG_I2C_DEBUG_ALGO is not set > +# CONFIG_I2C_DEBUG_BUS is not set > +# CONFIG_I2C_DEBUG_CHIP is not set > +CONFIG_SPI=y > +# CONFIG_SPI_DEBUG is not set > +CONFIG_SPI_MASTER=y > + > +# > +# SPI Master Controller Drivers > +# > +# CONFIG_SPI_BITBANG is not set > +CONFIG_SPI_OMAP24XX=y > + > +# > +# SPI Protocol Masters > +# > +# CONFIG_SPI_AT25 is not set > +# CONFIG_SPI_TSC2101 is not set > +# CONFIG_SPI_TSC2102 is not set > +# CONFIG_SPI_TSC210X is not set > +# CONFIG_SPI_TSC2301 is not set > +# CONFIG_SPI_SPIDEV is not set > +# CONFIG_SPI_TLE62X0 is not set > +CONFIG_HAVE_GPIO_LIB=y > + > +# > +# GPIO Support > +# > +# CONFIG_DEBUG_GPIO is not set > + > +# > +# I2C GPIO expanders: > +# > +# CONFIG_GPIO_PCA953X is not set > +# CONFIG_GPIO_PCF857X is not set > + > +# > +# SPI GPIO expanders: > +# > +# CONFIG_GPIO_MCP23S08 is not set > +CONFIG_W1=y > + > +# > +# 1-wire Bus Masters > +# > +# CONFIG_W1_MASTER_DS2490 is not set > +# CONFIG_W1_MASTER_DS2482 is not set > +# CONFIG_W1_MASTER_DS1WM is not set > +CONFIG_HDQ_MASTER_OMAP=y > +# CONFIG_W1_MASTER_GPIO is not set > + > +# > +# 1-wire Slaves > +# > +# CONFIG_W1_SLAVE_THERM is not set > +# CONFIG_W1_SLAVE_SMEM is not set > +# CONFIG_W1_SLAVE_DS2433 is not set > +# CONFIG_W1_SLAVE_DS2760 is not set > +CONFIG_W1_SLAVE_BQ27000=y > +CONFIG_POWER_SUPPLY=y > +# CONFIG_POWER_SUPPLY_DEBUG is not set > +# CONFIG_PDA_POWER is not set > +# CONFIG_BATTERY_DS2760 is not set > +# CONFIG_BATTERY_BQ27x00 is not set > +# CONFIG_HWMON is not set > +CONFIG_WATCHDOG=y > +CONFIG_WATCHDOG_NOWAYOUT=y > + > +# > +# Watchdog Device Drivers > +# > +# CONFIG_SOFT_WATCHDOG is not set > +CONFIG_OMAP_WATCHDOG=y > + > +# > +# USB-based Watchdog Cards > +# > +# CONFIG_USBPCWATCHDOG is not set > + > +# > +# Sonics Silicon Backplane > +# > +CONFIG_SSB_POSSIBLE=y > +# CONFIG_SSB is not set > + > +# > +# Multifunction device drivers > +# > +# CONFIG_MFD_SM501 is not set > +# CONFIG_MFD_ASIC3 is not set > +# CONFIG_HTC_EGPIO is not set > +# CONFIG_HTC_PASIC3 is not set > + > +# > +# Multimedia devices > +# > + > +# > +# Multimedia core support > +# > +# CONFIG_VIDEO_DEV is not set > + > +# > +# Multimedia drivers > +# > +CONFIG_DAB=y > +# CONFIG_USB_DABUSB is not set > + > +# > +# Graphics support > +# > +# CONFIG_VGASTATE is not set > +CONFIG_VIDEO_OUTPUT_CONTROL=m > +# CONFIG_FB is not set > +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set > + > +# > +# Display device support > +# > +# CONFIG_DISPLAY_SUPPORT is not set > + > +# > +# Console display driver support > +# > +# CONFIG_VGA_CONSOLE is not set > +CONFIG_DUMMY_CONSOLE=y > + > +# > +# Sound > +# > +CONFIG_SOUND=y > + > +# > +# Advanced Linux Sound Architecture > +# > +CONFIG_SND=y > +# CONFIG_SND_SEQUENCER is not set > +# CONFIG_SND_MIXER_OSS is not set > +# CONFIG_SND_PCM_OSS is not set > +# CONFIG_SND_DYNAMIC_MINORS is not set > +CONFIG_SND_SUPPORT_OLD_API=y > +CONFIG_SND_VERBOSE_PROCFS=y > +# CONFIG_SND_VERBOSE_PRINTK is not set > +# CONFIG_SND_DEBUG is not set > + > +# > +# Generic devices > +# > +# CONFIG_SND_DUMMY is not set > +# CONFIG_SND_MTPAV is not set > +# CONFIG_SND_SERIAL_U16550 is not set > +# CONFIG_SND_MPU401 is not set > + > +# > +# ALSA ARM devices > +# > +# CONFIG_SND_OMAP_AIC23 is not set > +# CONFIG_SND_OMAP_TSC2101 is not set > +# CONFIG_SND_SX1 is not set > +# CONFIG_SND_OMAP_TSC2102 is not set > +# CONFIG_SND_OMAP24XX_EAC is not set > + > +# > +# SPI devices > +# > + > +# > +# USB devices > +# > +# CONFIG_SND_USB_AUDIO is not set > +# CONFIG_SND_USB_CAIAQ is not set > + > +# > +# System on Chip audio support > +# > +# CONFIG_SND_SOC is not set > + > +# > +# ALSA SoC audio for Freescale SOCs > +# > + > +# > +# SoC Audio for the Texas Instruments OMAP > +# > + > +# > +# Open Sound System > +# > +# CONFIG_SOUND_PRIME is not set > +CONFIG_HID_SUPPORT=y > +CONFIG_HID=y > +# CONFIG_HID_DEBUG is not set > +# CONFIG_HIDRAW is not set > + > +# > +# USB Input Devices > +# > +CONFIG_USB_HID=y > +# CONFIG_USB_HIDINPUT_POWERBOOK is not set > +# CONFIG_HID_FF is not set > +# CONFIG_USB_HIDDEV is not set > +CONFIG_USB_SUPPORT=y > +CONFIG_USB_ARCH_HAS_HCD=y > +CONFIG_USB_ARCH_HAS_OHCI=y > +CONFIG_USB_ARCH_HAS_EHCI=y > +CONFIG_USB=y > +# CONFIG_USB_DEBUG is not set > +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set > + > +# > +# Miscellaneous USB options > +# > +CONFIG_USB_DEVICEFS=y > +CONFIG_USB_DEVICE_CLASS=y > +# CONFIG_USB_DYNAMIC_MINORS is not set > +CONFIG_USB_SUSPEND=y > +CONFIG_USB_OTG=y > +# CONFIG_USB_OTG_WHITELIST is not set > +# CONFIG_USB_OTG_BLACKLIST_HUB is not set > + > +# > +# USB Host Controller Drivers > +# > +# CONFIG_USB_C67X00_HCD is not set > +# CONFIG_USB_EHCI_HCD is not set > +# CONFIG_USB_ISP116X_HCD is not set > +# CONFIG_USB_ISP1760_HCD is not set > +# CONFIG_USB_OHCI_HCD is not set > +# CONFIG_USB_SL811_HCD is not set > +# CONFIG_USB_R8A66597_HCD is not set > +CONFIG_USB_MUSB_HDRC=y > +CONFIG_USB_MUSB_SOC=y > + > +# > +# OMAP 343x high speed USB support > +# > +# CONFIG_USB_MUSB_HOST is not set > +# CONFIG_USB_MUSB_PERIPHERAL is not set > +CONFIG_USB_MUSB_OTG=y > +CONFIG_USB_GADGET_MUSB_HDRC=y > +CONFIG_USB_MUSB_HDRC_HCD=y > +# CONFIG_MUSB_PIO_ONLY is not set > +CONFIG_USB_INVENTRA_DMA=y > +# CONFIG_USB_TI_CPPI_DMA is not set > +CONFIG_USB_MUSB_LOGLEVEL=0 > + > +# > +# USB Device Class drivers > +# > +# CONFIG_USB_ACM is not set > +# CONFIG_USB_PRINTER is not set > + > +# > +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > +# > + > +# > +# may also be needed; see USB_STORAGE Help for more information > +# > +# CONFIG_USB_STORAGE is not set > +# CONFIG_USB_LIBUSUAL is not set > + > +# > +# USB Imaging devices > +# > +# CONFIG_USB_MDC800 is not set > +# CONFIG_USB_MICROTEK is not set > +CONFIG_USB_MON=y > + > +# > +# USB port drivers > +# > +# CONFIG_USB_SERIAL is not set > + > +# > +# USB Miscellaneous drivers > +# > +# CONFIG_USB_EMI62 is not set > +# CONFIG_USB_EMI26 is not set > +# CONFIG_USB_ADUTUX is not set > +# CONFIG_USB_AUERSWALD is not set > +# CONFIG_USB_RIO500 is not set > +# CONFIG_USB_LEGOTOWER is not set > +# CONFIG_USB_LCD is not set > +# CONFIG_USB_BERRY_CHARGE is not set > +# CONFIG_USB_LED is not set > +# CONFIG_USB_CYPRESS_CY7C63 is not set > +# CONFIG_USB_CYTHERM is not set > +# CONFIG_USB_PHIDGET is not set > +# CONFIG_USB_IDMOUSE is not set > +# CONFIG_USB_FTDI_ELAN is not set > +# CONFIG_USB_APPLEDISPLAY is not set > +# CONFIG_USB_LD is not set > +# CONFIG_USB_TRANCEVIBRATOR is not set > +# CONFIG_USB_IOWARRIOR is not set > +# CONFIG_USB_TEST is not set > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_DEBUG=y > +CONFIG_USB_GADGET_DEBUG_FILES=y > +CONFIG_USB_GADGET_SELECTED=y > +# CONFIG_USB_GADGET_AMD5536UDC is not set > +# CONFIG_USB_GADGET_ATMEL_USBA is not set > +# CONFIG_USB_GADGET_FSL_USB2 is not set > +# CONFIG_USB_GADGET_NET2280 is not set > +# CONFIG_USB_GADGET_PXA2XX is not set > +# CONFIG_USB_GADGET_M66592 is not set > +# CONFIG_USB_GADGET_PXA27X is not set > +# CONFIG_USB_GADGET_GOKU is not set > +# CONFIG_USB_GADGET_LH7A40X is not set > +# CONFIG_USB_GADGET_OMAP is not set > +# CONFIG_USB_GADGET_S3C2410 is not set > +# CONFIG_USB_GADGET_AT91 is not set > +# CONFIG_USB_GADGET_DUMMY_HCD is not set > +CONFIG_USB_GADGET_DUALSPEED=y > +CONFIG_USB_ZERO=m > +# CONFIG_USB_ZERO_HNPTEST is not set > +# CONFIG_USB_ETH is not set > +# CONFIG_USB_GADGETFS is not set > +CONFIG_USB_FILE_STORAGE=m > +CONFIG_USB_FILE_STORAGE_TEST=y > +CONFIG_USB_G_SERIAL=m > +# CONFIG_USB_MIDI_GADGET is not set > +# CONFIG_USB_G_PRINTER is not set > +CONFIG_MMC=y > +# CONFIG_MMC_DEBUG is not set > +# CONFIG_MMC_UNSAFE_RESUME is not set > + > +# > +# MMC/SD Card Drivers > +# > +CONFIG_MMC_BLOCK=y > +CONFIG_MMC_BLOCK_BOUNCE=y > +# CONFIG_SDIO_UART is not set > + > +# > +# MMC/SD Host Controller Drivers > +# > +CONFIG_MMC_OMAP_HS=y > +# CONFIG_MMC_SPI is not set > +# CONFIG_NEW_LEDS is not set > +CONFIG_RTC_LIB=y > +CONFIG_RTC_CLASS=y > +CONFIG_RTC_HCTOSYS=y > +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > +# CONFIG_RTC_DEBUG is not set > + > +# > +# RTC interfaces > +# > +CONFIG_RTC_INTF_SYSFS=y > +CONFIG_RTC_INTF_PROC=y > +CONFIG_RTC_INTF_DEV=y > +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set > +# CONFIG_RTC_DRV_TEST is not set > + > +# > +# I2C RTC drivers > +# > +# CONFIG_RTC_DRV_DS1307 is not set > +# CONFIG_RTC_DRV_DS1374 is not set > +# CONFIG_RTC_DRV_DS1672 is not set > +# CONFIG_RTC_DRV_MAX6900 is not set > +# CONFIG_RTC_DRV_RS5C372 is not set > +# CONFIG_RTC_DRV_ISL1208 is not set > +# CONFIG_RTC_DRV_X1205 is not set > +# CONFIG_RTC_DRV_PCF8563 is not set > +# CONFIG_RTC_DRV_PCF8583 is not set > +# CONFIG_RTC_DRV_M41T80 is not set > +CONFIG_RTC_DRV_TWL4030=y > +# CONFIG_RTC_DRV_S35390A is not set > + > +# > +# SPI RTC drivers > +# > +# CONFIG_RTC_DRV_MAX6902 is not set > +# CONFIG_RTC_DRV_R9701 is not set > +# CONFIG_RTC_DRV_RS5C348 is not set > + > +# > +# Platform RTC drivers > +# > +# CONFIG_RTC_DRV_CMOS is not set > +# CONFIG_RTC_DRV_DS1511 is not set > +# CONFIG_RTC_DRV_DS1553 is not set > +# CONFIG_RTC_DRV_DS1742 is not set > +# CONFIG_RTC_DRV_STK17TA8 is not set > +# CONFIG_RTC_DRV_M48T86 is not set > +# CONFIG_RTC_DRV_M48T59 is not set > +# CONFIG_RTC_DRV_V3020 is not set > + > +# > +# on-CPU RTC drivers > +# > +# CONFIG_UIO is not set > + > +# > +# CBUS support > +# > +# CONFIG_CBUS is not set > + > +# > +# File systems > +# > +CONFIG_EXT2_FS=y > +# CONFIG_EXT2_FS_XATTR is not set > +# CONFIG_EXT2_FS_XIP is not set > +CONFIG_EXT3_FS=y > +# CONFIG_EXT3_FS_XATTR is not set > +# CONFIG_EXT4DEV_FS is not set > +CONFIG_JBD=y > +# CONFIG_REISERFS_FS is not set > +# CONFIG_JFS_FS is not set > +# CONFIG_FS_POSIX_ACL is not set > +# CONFIG_XFS_FS is not set > +CONFIG_DNOTIFY=y > +CONFIG_INOTIFY=y > +CONFIG_INOTIFY_USER=y > +CONFIG_QUOTA=y > +CONFIG_PRINT_QUOTA_WARNING=y > +# CONFIG_QFMT_V1 is not set > +CONFIG_QFMT_V2=y > +CONFIG_QUOTACTL=y > +# CONFIG_AUTOFS_FS is not set > +# CONFIG_AUTOFS4_FS is not set > +# CONFIG_FUSE_FS is not set > + > +# > +# CD-ROM/DVD Filesystems > +# > +# CONFIG_ISO9660_FS is not set > +# CONFIG_UDF_FS is not set > + > +# > +# DOS/FAT/NT Filesystems > +# > +CONFIG_FAT_FS=y > +CONFIG_MSDOS_FS=y > +CONFIG_VFAT_FS=y > +CONFIG_FAT_DEFAULT_CODEPAGE=437 > +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > +# CONFIG_NTFS_FS is not set > + > +# > +# Pseudo filesystems > +# > +CONFIG_PROC_FS=y > +CONFIG_PROC_SYSCTL=y > +CONFIG_SYSFS=y > +CONFIG_TMPFS=y > +# CONFIG_TMPFS_POSIX_ACL is not set > +# CONFIG_HUGETLB_PAGE is not set > +# CONFIG_CONFIGFS_FS is not set > + > +# > +# Miscellaneous filesystems > +# > +# CONFIG_ADFS_FS is not set > +# CONFIG_AFFS_FS is not set > +# CONFIG_HFS_FS is not set > +# CONFIG_HFSPLUS_FS is not set > +# CONFIG_BEFS_FS is not set > +# CONFIG_BFS_FS is not set > +# CONFIG_EFS_FS is not set > +# CONFIG_CRAMFS is not set > +# CONFIG_VXFS_FS is not set > +# CONFIG_MINIX_FS is not set > +# CONFIG_HPFS_FS is not set > +# CONFIG_QNX4FS_FS is not set > +# CONFIG_ROMFS_FS is not set > +# CONFIG_SYSV_FS is not set > +# CONFIG_UFS_FS is not set > + > +# > +# Partition Types > +# > +CONFIG_PARTITION_ADVANCED=y > +# CONFIG_ACORN_PARTITION is not set > +# CONFIG_OSF_PARTITION is not set > +# CONFIG_AMIGA_PARTITION is not set > +# CONFIG_ATARI_PARTITION is not set > +# CONFIG_MAC_PARTITION is not set > +CONFIG_MSDOS_PARTITION=y > +# CONFIG_BSD_DISKLABEL is not set > +# CONFIG_MINIX_SUBPARTITION is not set > +# CONFIG_SOLARIS_X86_PARTITION is not set > +# CONFIG_UNIXWARE_DISKLABEL is not set > +# CONFIG_LDM_PARTITION is not set > +# CONFIG_SGI_PARTITION is not set > +# CONFIG_ULTRIX_PARTITION is not set > +# CONFIG_SUN_PARTITION is not set > +# CONFIG_KARMA_PARTITION is not set > +# CONFIG_EFI_PARTITION is not set > +# CONFIG_SYSV68_PARTITION is not set > +CONFIG_NLS=y > +CONFIG_NLS_DEFAULT="iso8859-1" > +CONFIG_NLS_CODEPAGE_437=y > +# CONFIG_NLS_CODEPAGE_737 is not set > +# CONFIG_NLS_CODEPAGE_775 is not set > +# CONFIG_NLS_CODEPAGE_850 is not set > +# CONFIG_NLS_CODEPAGE_852 is not set > +# CONFIG_NLS_CODEPAGE_855 is not set > +# CONFIG_NLS_CODEPAGE_857 is not set > +# CONFIG_NLS_CODEPAGE_860 is not set > +# CONFIG_NLS_CODEPAGE_861 is not set > +# CONFIG_NLS_CODEPAGE_862 is not set > +# CONFIG_NLS_CODEPAGE_863 is not set > +# CONFIG_NLS_CODEPAGE_864 is not set > +# CONFIG_NLS_CODEPAGE_865 is not set > +# CONFIG_NLS_CODEPAGE_866 is not set > +# CONFIG_NLS_CODEPAGE_869 is not set > +# CONFIG_NLS_CODEPAGE_936 is not set > +# CONFIG_NLS_CODEPAGE_950 is not set > +# CONFIG_NLS_CODEPAGE_932 is not set > +# CONFIG_NLS_CODEPAGE_949 is not set > +# CONFIG_NLS_CODEPAGE_874 is not set > +# CONFIG_NLS_ISO8859_8 is not set > +# CONFIG_NLS_CODEPAGE_1250 is not set > +# CONFIG_NLS_CODEPAGE_1251 is not set > +# CONFIG_NLS_ASCII is not set > +CONFIG_NLS_ISO8859_1=y > +# CONFIG_NLS_ISO8859_2 is not set > +# CONFIG_NLS_ISO8859_3 is not set > +# CONFIG_NLS_ISO8859_4 is not set > +# CONFIG_NLS_ISO8859_5 is not set > +# CONFIG_NLS_ISO8859_6 is not set > +# CONFIG_NLS_ISO8859_7 is not set > +# CONFIG_NLS_ISO8859_9 is not set > +# CONFIG_NLS_ISO8859_13 is not set > +# CONFIG_NLS_ISO8859_14 is not set > +# CONFIG_NLS_ISO8859_15 is not set > +# CONFIG_NLS_KOI8_R is not set > +# CONFIG_NLS_KOI8_U is not set > +# CONFIG_NLS_UTF8 is not set > + > +# > +# Kernel hacking > +# > +# CONFIG_PRINTK_TIME is not set > +CONFIG_ENABLE_WARN_DEPRECATED=y > +CONFIG_ENABLE_MUST_CHECK=y > +CONFIG_FRAME_WARN=1024 > +CONFIG_MAGIC_SYSRQ=y > +# CONFIG_UNUSED_SYMBOLS is not set > +# CONFIG_DEBUG_FS is not set > +# CONFIG_HEADERS_CHECK is not set > +CONFIG_DEBUG_KERNEL=y > +# CONFIG_DEBUG_SHIRQ is not set > +CONFIG_DETECT_SOFTLOCKUP=y > +CONFIG_SCHED_DEBUG=y > +# CONFIG_SCHEDSTATS is not set > +# CONFIG_TIMER_STATS is not set > +# CONFIG_DEBUG_OBJECTS is not set > +# CONFIG_DEBUG_SLAB is not set > +# CONFIG_DEBUG_RT_MUTEXES is not set > +# CONFIG_RT_MUTEX_TESTER is not set > +# CONFIG_DEBUG_SPINLOCK is not set > +CONFIG_DEBUG_MUTEXES=y > +# CONFIG_DEBUG_LOCK_ALLOC is not set > +# CONFIG_PROVE_LOCKING is not set > +# CONFIG_LOCK_STAT is not set > +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set > +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set > +# CONFIG_DEBUG_KOBJECT is not set > +# CONFIG_DEBUG_BUGVERBOSE is not set > +CONFIG_DEBUG_INFO=y > +# CONFIG_DEBUG_VM is not set > +# CONFIG_DEBUG_WRITECOUNT is not set > +# CONFIG_DEBUG_LIST is not set > +# CONFIG_DEBUG_SG is not set > +CONFIG_FRAME_POINTER=y > +# CONFIG_BOOT_PRINTK_DELAY is not set > +# CONFIG_RCU_TORTURE_TEST is not set > +# CONFIG_BACKTRACE_SELF_TEST is not set > +# CONFIG_FAULT_INJECTION is not set > +# CONFIG_SAMPLES is not set > +# CONFIG_DEBUG_USER is not set > +# CONFIG_DEBUG_ERRORS is not set > +# CONFIG_DEBUG_STACK_USAGE is not set > +CONFIG_DEBUG_LL=y > +# CONFIG_DEBUG_ICEDCC is not set > + > +# > +# Security options > +# > +# CONFIG_KEYS is not set > +# CONFIG_SECURITY is not set > +# CONFIG_SECURITY_FILE_CAPABILITIES is not set > +CONFIG_CRYPTO=y > + > +# > +# Crypto core or helper > +# > +CONFIG_CRYPTO_ALGAPI=y > +CONFIG_CRYPTO_BLKCIPHER=y > +CONFIG_CRYPTO_MANAGER=y > +# CONFIG_CRYPTO_GF128MUL is not set > +# CONFIG_CRYPTO_NULL is not set > +# CONFIG_CRYPTO_CRYPTD is not set > +# CONFIG_CRYPTO_AUTHENC is not set > +# CONFIG_CRYPTO_TEST is not set > + > +# > +# Authenticated Encryption with Associated Data > +# > +# CONFIG_CRYPTO_CCM is not set > +# CONFIG_CRYPTO_GCM is not set > +# CONFIG_CRYPTO_SEQIV is not set > + > +# > +# Block modes > +# > +CONFIG_CRYPTO_CBC=y > +# CONFIG_CRYPTO_CTR is not set > +# CONFIG_CRYPTO_CTS is not set > +CONFIG_CRYPTO_ECB=m > +# CONFIG_CRYPTO_LRW is not set > +CONFIG_CRYPTO_PCBC=m > +# CONFIG_CRYPTO_XTS is not set > + > +# > +# Hash modes > +# > +# CONFIG_CRYPTO_HMAC is not set > +# CONFIG_CRYPTO_XCBC is not set > + > +# > +# Digest > +# > +# CONFIG_CRYPTO_CRC32C is not set > +# CONFIG_CRYPTO_MD4 is not set > +CONFIG_CRYPTO_MD5=y > +# CONFIG_CRYPTO_MICHAEL_MIC is not set > +# CONFIG_CRYPTO_SHA1 is not set > +# CONFIG_CRYPTO_SHA256 is not set > +# CONFIG_CRYPTO_SHA512 is not set > +# CONFIG_CRYPTO_TGR192 is not set > +# CONFIG_CRYPTO_WP512 is not set > + > +# > +# Ciphers > +# > +# CONFIG_CRYPTO_AES is not set > +# CONFIG_CRYPTO_ANUBIS is not set > +# CONFIG_CRYPTO_ARC4 is not set > +# CONFIG_CRYPTO_BLOWFISH is not set > +# CONFIG_CRYPTO_CAMELLIA is not set > +# CONFIG_CRYPTO_CAST5 is not set > +# CONFIG_CRYPTO_CAST6 is not set > +CONFIG_CRYPTO_DES=y > +# CONFIG_CRYPTO_FCRYPT is not set > +# CONFIG_CRYPTO_KHAZAD is not set > +# CONFIG_CRYPTO_SALSA20 is not set > +# CONFIG_CRYPTO_SEED is not set > +# CONFIG_CRYPTO_SERPENT is not set > +# CONFIG_CRYPTO_TEA is not set > +# CONFIG_CRYPTO_TWOFISH is not set > + > +# > +# Compression > +# > +# CONFIG_CRYPTO_DEFLATE is not set > +# CONFIG_CRYPTO_LZO is not set > +CONFIG_CRYPTO_HW=y > + > +# > +# Library routines > +# > +CONFIG_BITREVERSE=y > +# CONFIG_GENERIC_FIND_FIRST_BIT is not set > +# CONFIG_GENERIC_FIND_NEXT_BIT is not set > +CONFIG_CRC_CCITT=y > +# CONFIG_CRC16 is not set > +# CONFIG_CRC_ITU_T is not set > +CONFIG_CRC32=y > +# CONFIG_CRC7 is not set > +CONFIG_LIBCRC32C=y > +CONFIG_PLIST=y > +CONFIG_HAS_IOMEM=y > +CONFIG_HAS_IOPORT=y > +CONFIG_HAS_DMA=y > -- > 1.5.3.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP. 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat @ 2008-05-16 17:53 ` Tony Lindgren 1 sibling, 0 replies; 10+ messages in thread From: Tony Lindgren @ 2008-05-16 17:53 UTC (permalink / raw) To: Nishant Kamat; +Cc: linux-omap * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > This adds basic board support for the OMAP3430 LDP development platform. > It adds support for the touchscreen, RTC, UART, USB and MMC - all of which > work with little or no changes w.r.t. the OMAP3430 SDP. Pushing. Tony > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > arch/arm/mach-omap2/Kconfig | 4 + > arch/arm/mach-omap2/Makefile | 3 + > arch/arm/mach-omap2/board-ldp.c | 253 +++++++++++++++++++++++++++++++++ > include/asm-arm/arch-omap/board-ldp.h | 34 +++++ > include/asm-arm/arch-omap/hardware.h | 4 + > 5 files changed, 298 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-omap2/board-ldp.c > create mode 100644 include/asm-arm/arch-omap/board-ldp.h > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 5c229cc..d38f8ca 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -98,6 +98,10 @@ config MACH_OMAP_2430SDP > bool "OMAP 2430 SDP board" > depends on ARCH_OMAP2 && ARCH_OMAP2430 > > +config MACH_OMAP_LDP > + bool "OMAP 3 LDP board" > + depends on ARCH_OMAP3 && ARCH_OMAP34XX > + > config MACH_OMAP_2430OSK > bool "OMAP 2430 OSK board" > depends on ARCH_OMAP2 && ARCH_OMAP24XX > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > index 552664c..b6eea89 100644 > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -44,6 +44,9 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ > obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ > usb-musb.o usb-ehci.o \ > hsmmc.o > +obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ > + hsmmc.o \ > + usb-musb.o > obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o \ > board-apollon-mmc.o \ > board-apollon-keys.o > diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c > new file mode 100644 > index 0000000..2ac4c9b > --- /dev/null > +++ b/arch/arm/mach-omap2/board-ldp.c > @@ -0,0 +1,253 @@ > +/* > + * linux/arch/arm/mach-omap2/board-ldp.c > + * > + * Copyright (C) 2008 Texas Instruments Inc. > + * Nishant Kamat <nskamat@ti.com> > + * > + * Modified from mach-omap2/board-3430sdp.c > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/kernel.h> > +#include <linux/init.h> > +#include <linux/platform_device.h> > +#include <linux/delay.h> > +#include <linux/input.h> > +#include <linux/workqueue.h> > +#include <linux/err.h> > +#include <linux/clk.h> > +#include <linux/spi/spi.h> > +#include <linux/spi/ads7846.h> > +#include <linux/i2c/twl4030.h> > +#include <linux/i2c/twl4030-rtc.h> > + > +#include <asm/hardware.h> > +#include <asm/mach-types.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > + > +#include <asm/arch/mcspi.h> > +#include <asm/arch/gpio.h> > +#include <asm/arch/board.h> > +#include <asm/arch/common.h> > +#include <asm/arch/gpmc.h> > +#include <asm/arch/hsmmc.h> > +#include <asm/arch/usb-musb.h> > + > +#include <asm/io.h> > +#include <asm/delay.h> > +#include <asm/arch/control.h> > + > +#define ENABLE_VAUX1_DEDICATED 0x03 > +#define ENABLE_VAUX1_DEV_GRP 0x20 > + > +#define TWL4030_MSECURE_GPIO 22 > + > +static int ts_gpio; > + > +#ifdef CONFIG_RTC_DRV_TWL4030 > +static int twl4030_rtc_init(void) > +{ > + int ret = 0; > + > + /* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */ > + if (is_device_type_gp() && is_sil_rev_less_than(OMAP3430_REV_ES2_0)) { > + u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C; > + int mux_mask = 0x04; > + u16 tmp; > + > + ret = omap_request_gpio(TWL4030_MSECURE_GPIO); > + if (ret < 0) { > + printk(KERN_ERR "twl4030_rtc_init: can't" > + "reserve GPIO:%d !\n", TWL4030_MSECURE_GPIO); > + goto out; > + } > + /* > + * TWL4030 will be in secure mode if msecure line from OMAP > + * is low. Make msecure line high in order to change the > + * TWL4030 RTC time and calender registers. > + */ > + omap_set_gpio_direction(TWL4030_MSECURE_GPIO, 0); > + > + tmp = omap_readw(msecure_pad_config_reg); > + tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */ > + tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */ > + omap_writew(tmp, msecure_pad_config_reg); > + > + omap_set_gpio_dataout(TWL4030_MSECURE_GPIO, 1); > + } > +out: > + return ret; > +} > + > +static void twl4030_rtc_exit(void) > +{ > + omap_free_gpio(TWL4030_MSECURE_GPIO); > +} > + > +static struct twl4030rtc_platform_data ldp_twl4030rtc_data = { > + .init = &twl4030_rtc_init, > + .exit = &twl4030_rtc_exit, > +}; > + > +static struct platform_device ldp_twl4030rtc_device = { > + .name = "twl4030_rtc", > + .id = -1, > + .dev = { > + .platform_data = &ldp_twl4030rtc_data, > + }, > +}; > +#endif > + > +/** > + * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq > + * > + * @return - void. If request gpio fails then Flag KERN_ERR. > + */ > +static void ads7846_dev_init(void) > +{ > + if (omap_request_gpio(ts_gpio) < 0) { > + printk(KERN_ERR "can't get ads746 pen down GPIO\n"); > + return; > + } > + > + omap_set_gpio_direction(ts_gpio, 1); > + > + omap_set_gpio_debounce(ts_gpio, 1); > + omap_set_gpio_debounce_time(ts_gpio, 0xa); > +} > + > +static int ads7846_get_pendown_state(void) > +{ > + return !omap_get_gpio_datain(ts_gpio); > +} > + > +/* > + * This enable(1)/disable(0) the voltage for TS: uses twl4030 calls > + */ > +static int ads7846_vaux_control(int vaux_cntrl) > +{ > + int ret = 0; > + > +#ifdef CONFIG_TWL4030_CORE > + /* check for return value of ldo_use: if success it returns 0 */ > + if (vaux_cntrl == VAUX_ENABLE) { > + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + ENABLE_VAUX1_DEDICATED, TWL4030_VAUX1_DEDICATED)) > + return -EIO; > + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + ENABLE_VAUX1_DEV_GRP, TWL4030_VAUX1_DEV_GRP)) > + return -EIO; > + } else if (vaux_cntrl == VAUX_DISABLE) { > + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + 0x00, TWL4030_VAUX1_DEDICATED)) > + return -EIO; > + if (ret != twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + 0x00, TWL4030_VAUX1_DEV_GRP)) > + return -EIO; > + } > +#else > + ret = -EIO; > +#endif > + return ret; > +} > + > +static struct ads7846_platform_data tsc2046_config __initdata = { > + .get_pendown_state = ads7846_get_pendown_state, > + .keep_vref_on = 1, > + .vaux_control = ads7846_vaux_control, > +}; > + > + > +static struct omap2_mcspi_device_config tsc2046_mcspi_config = { > + .turbo_mode = 0, > + .single_channel = 1, /* 0: slave, 1: master */ > +}; > + > +static struct spi_board_info ldp_spi_board_info[] __initdata = { > + [0] = { > + /* > + * TSC2046 operates at a max freqency of 2MHz, so > + * operate slightly below at 1.5MHz > + */ > + .modalias = "ads7846", > + .bus_num = 1, > + .chip_select = 0, > + .max_speed_hz = 1500000, > + .controller_data = &tsc2046_mcspi_config, > + .irq = 0, > + .platform_data = &tsc2046_config, > + }, > +}; > + > +static struct platform_device *ldp_devices[] __initdata = { > +#ifdef CONFIG_RTC_DRV_TWL4030 > + &ldp_twl4030rtc_device, > +#endif > +}; > + > +static void __init omap_ldp_init_irq(void) > +{ > + omap2_init_common_hw(); > + omap_init_irq(); > + omap_gpio_init(); > +} > + > +static struct omap_uart_config ldp_uart_config __initdata = { > + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > +}; > + > +static struct omap_mmc_config ldp_mmc_config __initdata = { > + .mmc [0] = { > + .enabled = 1, > + .wire4 = 1, > + }, > +}; > + > +static struct omap_board_config_kernel ldp_config[] __initdata = { > + { OMAP_TAG_UART, &ldp_uart_config }, > + { OMAP_TAG_MMC, &ldp_mmc_config }, > +}; > + > +static int __init omap_i2c_init(void) > +{ > + omap_register_i2c_bus(1, 2600, NULL, 0); > + omap_register_i2c_bus(2, 400, NULL, 0); > + omap_register_i2c_bus(3, 400, NULL, 0); > + return 0; > +} > + > +static void __init omap_ldp_init(void) > +{ > + platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); > + omap_board_config = ldp_config; > + omap_board_config_size = ARRAY_SIZE(ldp_config); > + ts_gpio = 54; > + ldp_spi_board_info[0].irq = OMAP_GPIO_IRQ(ts_gpio); > + spi_register_board_info(ldp_spi_board_info, > + ARRAY_SIZE(ldp_spi_board_info)); > + ads7846_dev_init(); > + omap_serial_init(); > + usb_musb_init(); > + hsmmc_init(); > +} > + > +static void __init omap_ldp_map_io(void) > +{ > + omap2_set_globals_343x(); > + omap2_map_common_io(); > +} > +arch_initcall(omap_i2c_init); > + > +MACHINE_START(OMAP_LDP, "OMAP LDP board") > + .phys_io = 0x48000000, > + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, > + .boot_params = 0x80000100, > + .map_io = omap_ldp_map_io, > + .init_irq = omap_ldp_init_irq, > + .init_machine = omap_ldp_init, > + .timer = &omap_timer, > +MACHINE_END > diff --git a/include/asm-arm/arch-omap/board-ldp.h b/include/asm-arm/arch-omap/board-ldp.h > new file mode 100644 > index 0000000..b227561 > --- /dev/null > +++ b/include/asm-arm/arch-omap/board-ldp.h > @@ -0,0 +1,34 @@ > +/* > + * linux/include/asm-arm/arch-omap/board-ldp.h > + * > + * Hardware definitions for TI OMAP3 LDP. > + * > + * Copyright (C) 2008 Texas Instruments Inc. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + * > + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED > + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF > + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN > + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, > + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT > + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON > + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF > + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + * > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, write to the Free Software Foundation, Inc., > + * 675 Mass Ave, Cambridge, MA 02139, USA. > + */ > + > +#ifndef __ASM_ARCH_OMAP_LDP_H > +#define __ASM_ARCH_OMAP_LDP_H > + > +#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ > + > +#endif /* __ASM_ARCH_OMAP_LDP_H */ > diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h > index 09f8ef8..fed9a76 100644 > --- a/include/asm-arm/arch-omap/hardware.h > +++ b/include/asm-arm/arch-omap/hardware.h > @@ -343,6 +343,10 @@ > #include "board-omap3beagle.h" > #endif > > +#ifdef CONFIG_MACH_OMAP_LDP > +#include "board-ldp.h" > +#endif > + > #ifdef CONFIG_MACH_OMAP_APOLLON > #include "board-apollon.h" > #endif > -- > 1.5.3.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 2008-05-15 14:42 [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat @ 2008-05-16 17:52 ` Tony Lindgren 1 sibling, 0 replies; 10+ messages in thread From: Tony Lindgren @ 2008-05-16 17:52 UTC (permalink / raw) To: Nishant Kamat; +Cc: linux-omap * Nishant Kamat <nskamat@ti.com> [080515 07:45]: > This patch adds the register defines for TWL4030 VAUX1. Pushing. Tony > Signed-off-by: Nishant Kamat <nskamat@ti.com> > --- > include/linux/i2c/twl4030.h | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h > index 05d07f9..40af46e 100644 > --- a/include/linux/i2c/twl4030.h > +++ b/include/linux/i2c/twl4030.h > @@ -77,6 +77,8 @@ > /* Offsets to Power Registers */ > #define TWL4030_VDAC_DEV_GRP 0x3B > #define TWL4030_VDAC_DEDICATED 0x3E > +#define TWL4030_VAUX1_DEV_GRP 0x17 > +#define TWL4030_VAUX1_DEDICATED 0x1A > #define TWL4030_VAUX2_DEV_GRP 0x1B > #define TWL4030_VAUX2_DEDICATED 0x1E > #define TWL4030_VAUX3_DEV_GRP 0x1F > -- > 1.5.3.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2008-05-21 15:51 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-05-15 14:42 [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config " Nishant Kamat 2008-05-15 14:42 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support " Nishant Kamat 2008-05-16 17:55 ` Tony Lindgren 2008-05-19 9:50 ` [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP Kamat, Nishant 2008-05-21 15:51 ` Tony Lindgren 2008-05-16 17:54 ` [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP Tony Lindgren 2008-05-16 17:53 ` [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support " Tony Lindgren 2008-05-16 17:52 ` [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1 Tony Lindgren
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox