From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 0/9] 34XX: PM: Support for retention on suspend and idle Date: Tue, 20 May 2008 15:13:58 -0700 Message-ID: <20080520221357.GQ23002@atomide.com> References: <878wyav7ti.fsf@trdhcp146196.ntc.nokia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mho-02-bos.mailhop.org ([63.208.196.179]:53250 "EHLO mho-02-bos.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760177AbYETWN4 (ORCPT ); Tue, 20 May 2008 18:13:56 -0400 Content-Disposition: inline In-Reply-To: <878wyav7ti.fsf@trdhcp146196.ntc.nokia.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: =?iso-8859-1?Q?H=F6gander?= Jouni Cc: linux-omap@vger.kernel.org, paul@pwsan.com * H=F6gander Jouni [080516 03:54]: > This patch set adds suspend and pm idle support for omap3. There are > still lots of missing stuff so omap doesn't enter full retention > without workaround patches. Workaround patches are sent in separate > set. >=20 > You can try these by applying this set and workaround set. Then boot > the device and do "echo mem > /sys/power/state". Dynamic retention ca= n > be tried by "echo 1 > /sys/power/sleep_while_idle". There is one > pending patch by Felipe Balbi (ARCH: OMAP: MUSB: Do not block sleep) > addition to this and workaround set which is needed dynamic idle to > work. Enabling dynamic idle has nasty side effect that serial console > stops to work. This happens only if you enable it by "echo 1 > > /sys/power/sleep_while_idle" >=20 > I have tested these patches on TI 3430 SDP ES2.0 board. Pushing this series today. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html