public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/3] mtd omap2 nand driver: extend to work with omap3 boards
@ 2008-06-01  6:38 Steve Sakoman
  2008-06-10 21:27 ` Tony Lindgren
  0 siblings, 1 reply; 5+ messages in thread
From: Steve Sakoman @ 2008-06-01  6:38 UTC (permalink / raw)
  To: linux-omap@vger.kernel.org

From: Teerth Reddy <teerth@ti.com>, Steve Sakoman <steve@sakoman.com>

Extend omap2 mtd nand driver to work with ARCH_OMAP3 boards

Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
 Kconfig |    6 -
 omap2.c |  230 ++++++++++++++++++++++++++++++++++++++++------------------------
 2 files changed, 147 insertions(+), 89 deletions(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3d5e432..02b9ced 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -70,10 +70,10 @@ config MTD_NAND_AMS_DELTA
 	  Support for NAND flash on Amstrad E3 (Delta).

 config MTD_NAND_OMAP2
-	tristate "NAND Flash device on OMAP 2420H4/2430SDP boards"
-	depends on (ARM && ARCH_OMAP2 && MTD_NAND)
+	tristate "NAND Flash device on OMAP2 and OMAP3"
+	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
 	help
-          Support for NAND flash on Texas Instruments 2430SDP/2420H4 platforms.
+          Support for NAND flash on Texas Instruments OMAP2 and OMAP3
platforms.

 config MTD_NAND_OMAP
 	tristate "NAND Flash device on OMAP H3/H2/P2 boards"
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 3b7307c..3aac1d2 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -111,15 +111,6 @@
 static const char *part_probes[] = { "cmdlinepart", NULL };
 #endif

-static int hw_ecc = 1;
-
-/* new oob placement block for use with hardware ecc generation */
-static struct nand_ecclayout omap_hw_eccoob = {
-	.eccbytes = 12,
-	.eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
-	.oobfree = {{16, 32}, {33, 63} },
-};
-
 struct omap_nand_info {
 	struct nand_hw_control		controller;
 	struct omap_nand_platform_data	*pdata;
@@ -133,6 +124,13 @@ struct omap_nand_info {
 	void __iomem			*gpmc_cs_baseaddr;
 	void __iomem			*gpmc_baseaddr;
 };
+
+/*
+ * omap_nand_wp - This function enable or disable the Write Protect feature on
+ * NAND device
+ * @mtd: MTD device structure
+ * @mode: WP ON/OFF
+ */
 static void omap_nand_wp(struct mtd_info *mtd, int mode)
 {
 	struct omap_nand_info *info = container_of(mtd,
@@ -189,11 +187,11 @@ static void omap_hwcontrol(struct mtd_info *mtd,
int cmd, unsigned int ctrl)
 }

 /*
-* omap_read_buf - read data from NAND controller into buffer
-* @mtd: MTD device structure
-* @buf: buffer to store date
-* @len: number of bytes to read
-*/
+ * omap_read_buf - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
 static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct omap_nand_info *info = container_of(mtd,
@@ -207,11 +205,11 @@ static void omap_read_buf(struct mtd_info *mtd,
u_char *buf, int len)
 }

 /*
-* omap_write_buf - write buffer to NAND controller
-* @mtd: MTD device structure
-* @buf: data buffer
-* @len: number of bytes to write
-*/
+ * omap_write_buf - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
 static void omap_write_buf(struct mtd_info *mtd, const u_char * buf, int len)
 {
 	struct omap_nand_info *info = container_of(mtd,
@@ -250,10 +248,16 @@ static int omap_verify_buf(struct mtd_info *mtd,
const u_char * buf, int len)
 	return 0;
 }

+#ifdef CONFIG_MTD_NAND_OMAP_HWECC
+/*
+ * omap_hwecc_init-Initialize the Hardware ECC for NAND flash in GPMC
controller
+ * @mtd: MTD device structure
+ */
 static void omap_hwecc_init(struct mtd_info *mtd)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
+	register struct nand_chip *chip = mtd->priv;
 	unsigned long val = 0x0;

 	/* Read from ECC Control Register */
@@ -264,16 +268,15 @@ static void omap_hwecc_init(struct mtd_info *mtd)

 	/* Read from ECC Size Config Register */
 	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
-	/* ECCSIZE1=512 | ECCSIZE0=8bytes | Select eccResultsize[0123] */
-	val = ((0x000000FF<<22) | (0x00000003<<12) | (0x0000000F));
+	/* ECCSIZE1=512 | Select eccResultsize[0-3] */
+	val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
 	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
-
-
 }

 /*
- * This function will generate true ECC value, which can be used
+ * gen_true_ecc - This function will generate true ECC value, which can be used
  * when correcting data read from NAND flash memory core
+ * @ecc_buf: buffer to store ecc code
  */
 static void gen_true_ecc(u8 *ecc_buf)
 {
@@ -289,8 +292,12 @@ static void gen_true_ecc(u8 *ecc_buf)
 }

 /*
- * This function compares two ECC's and indicates if there is an error.
- * If the error can be corrected it will be corrected to the buffer
+ * omap_compare_ecc - This function compares two ECC's and indicates if there
+ * is an error. If the error can be corrected it will be corrected to the
+ * buffer
+ * @ecc_data1:  ecc code from nand spare area
+ * @ecc_data2:  ecc code from hardware register obtained from hardware ecc
+ * @page_data:  page data
  */
 static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
 			    u8 *ecc_data2,	/* read from register */
@@ -409,6 +416,14 @@ static int omap_compare_ecc(u8 *ecc_data1,	/*
read from NAND memory */
 	}
 }

+/*
+ * omap_correct_data - Compares the ecc read from nand spare area with ECC
+ * registers values and corrects one bit error if it has occured
+ * @mtd: MTD device structure
+ * @dat: page data
+ * @read_ecc: ecc read from nand flash
+ * @calc_ecc: ecc read from ECC registers
+ */
 static int omap_correct_data(struct mtd_info *mtd, u_char * dat,
 				u_char * read_ecc, u_char * calc_ecc)
 {
@@ -436,65 +451,64 @@ static int omap_correct_data(struct mtd_info
*mtd, u_char * dat,
 }

 /*
-** Generate non-inverted ECC bytes.
-**
-** Using noninverted ECC can be considered ugly since writing a blank
-** page ie. padding will clear the ECC bytes. This is no problem as long
-** nobody is trying to write data on the seemingly unused page.
-**
-** Reading an erased page will produce an ECC mismatch between
-** generated and read ECC bytes that has to be dealt with separately.
-*/
+ * omap_calcuate_ecc - Generate non-inverted ECC bytes.
+ * Using noninverted ECC can be considered ugly since writing a blank
+ * page ie. padding will clear the ECC bytes. This is no problem as long
+ * nobody is trying to write data on the seemingly unused page. Reading
+ * an erased page will produce an ECC mismatch between generated and read
+ * ECC bytes that has to be dealt with separately.
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ */
 static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 				u_char *ecc_code)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
 	unsigned long val = 0x0;
-	unsigned long reg, n;
-
-	/* Ex NAND_ECC_HW12_2048 */
-	if ((info->nand.ecc.mode == NAND_ECC_HW) &&
-		(info->nand.ecc.size  == 2048))
-		n = 4;
-	else
-		n = 1;
+	unsigned long reg;

 	/* Start Reading from HW ECC1_Result = 0x200 */
 	reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
-	while (n--) {
-		val = __raw_readl(reg);
-		*ecc_code++ = val;		/* P128e, ..., P1e */
-		*ecc_code++ = val >> 16;	/* P128o, ..., P1o */
-		/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
-		*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-		reg += 4;
-	}
+	val = __raw_readl(reg);
+	*ecc_code++ = val;          /* P128e, ..., P1e */
+	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
+	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+	reg += 4;

 	return 0;
-} /* omap_calculate_ecc */
+}

+/*
+ * omap_enable_hwecc - This function enables the hardware ecc functionality
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ */
 static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
+	register struct nand_chip *chip = mtd->priv;
+	unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
 	unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);

 	switch (mode) {
 	case NAND_ECC_READ    :
 		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
-		val = (1 << 7) | (0x0) | (0x1) ;
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
 		break;
 	case NAND_ECC_READSYN :
-		__raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
-		val = (1 << 7) | (0x0) | (0x1) ;
+		 __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
 		break;
 	case NAND_ECC_WRITE   :
 		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
-		val = (1 << 7) | (0x0) | (0x1) ;
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
 		break;
 	default:
 		DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n",
@@ -504,7 +518,38 @@ static void omap_enable_hwecc(struct mtd_info
*mtd, int mode)

 	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG);
 }
+#endif

+/*
+ * omap_wait - Wait function is called during Program and erase
+ * operations and the way it is called from MTD layer, we should wait
+ * till the NAND chip is ready after the programming/erase operation
+ * has completed.
+ * @mtd: MTD device structure
+ * @chip: NAND Chip structure
+ */
+static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+	register struct nand_chip *this = mtd->priv;
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	int status = 0;
+
+	this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_COMMAND;
+	this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA;
+
+	while (!(status & 0x40)) {
+		 __raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W);
+		status = __raw_readb(this->IO_ADDR_R);
+	}
+	return status;
+}
+
+/*
+ * omap_dev_ready - calls the platform specific dev_ready function
+ * @mtd: MTD device structure
+ */
 static int omap_dev_ready(struct mtd_info *mtd)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
@@ -534,7 +579,7 @@ static int __devinit omap_nand_probe(struct
platform_device *pdev)
 	struct omap_nand_info		*info;
 	struct omap_nand_platform_data	*pdata;
 	int				err;
-	unsigned long val;
+	unsigned long 			val;


 	pdata = pdev->dev.platform_data;
@@ -568,15 +613,20 @@ static int __devinit omap_nand_probe(struct
platform_device *pdev)
 	}

 	/* Enable RD PIN Monitoring Reg */
-	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
-	val |= WR_RD_PIN_MONITORING;
-	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
+	if (pdata->dev_ready) {
+		val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
+		val |= WR_RD_PIN_MONITORING;
+		gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
+	}

 	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7);
 	val &= ~(0xf << 8);
 	val |=  (0xc & 0xf) << 8;
 	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val);

+	/* NAND write protect off */
+	omap_nand_wp(&info->mtd, NAND_WP_OFF);
+
 	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
 				pdev->dev.driver->name)) {
 		err = -EBUSY;
@@ -597,29 +647,39 @@ static int __devinit omap_nand_probe(struct
platform_device *pdev)
 	info->nand.write_buf  = omap_write_buf;
 	info->nand.verify_buf = omap_verify_buf;

-	info->nand.dev_ready  = omap_dev_ready;
-	info->nand.chip_delay = 0;
-
-	/* Options */
-	info->nand.options   = NAND_BUSWIDTH_16;
-	info->nand.options  |= NAND_SKIP_BBTSCAN;
-
-	if (hw_ecc) {
-		/* init HW ECC */
-		omap_hwecc_init(&info->mtd);
-
-		info->nand.ecc.calculate = omap_calculate_ecc;
-		info->nand.ecc.hwctl     = omap_enable_hwecc;
-		info->nand.ecc.correct   = omap_correct_data;
-		info->nand.ecc.mode      = NAND_ECC_HW;
-		info->nand.ecc.bytes     = 12;
-		info->nand.ecc.size      = 2048;
-		info->nand.ecc.layout    = &omap_hw_eccoob;
-
+	/*
+	* If RDY/BSY line is connected to OMAP then use the omap ready funcrtion
+	* and the generic nand_wait function which reads the status register
+	* after monitoring the RDY/BSY line.Otherwise use a standard chip delay
+	* which is slightly more than tR (AC Timing) of the NAND device and read
+	* status register until you get a failure or success
+	*/
+	if (pdata->dev_ready) {
+		info->nand.dev_ready = omap_dev_ready;
+		info->nand.chip_delay = 0;
 	} else {
-		info->nand.ecc.mode = NAND_ECC_SOFT;
+		info->nand.waitfunc = omap_wait;
+		info->nand.chip_delay = 50;
 	}

+	info->nand.options  |= NAND_SKIP_BBTSCAN;
+	if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000)
+								== 0x1000)
+		info->nand.options  |= NAND_BUSWIDTH_16;
+
+#ifdef CONFIG_MTD_NAND_OMAP_HWECC
+	info->nand.ecc.bytes		= 3;
+	info->nand.ecc.size		= 512;
+	info->nand.ecc.calculate	= omap_calculate_ecc;
+	info->nand.ecc.hwctl		= omap_enable_hwecc;
+	info->nand.ecc.correct		= omap_correct_data;
+	info->nand.ecc.mode		= NAND_ECC_HW;
+
+	/* init HW ECC */
+	omap_hwecc_init(&info->mtd);
+#else
+	info->nand.ecc.mode = NAND_ECC_SOFT;
+#endif

 	/* DIP switches on some boards change between 8 and 16 bit
 	 * bus widths for flash.  Try the other width if the first try fails.
@@ -636,14 +696,12 @@ static int __devinit omap_nand_probe(struct
platform_device *pdev)
 	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
 	if (err > 0)
 		add_mtd_partitions(&info->mtd, info->parts, err);
-	else if (err < 0 && pdata->parts)
+	else if (err <= 0 && pdata->parts)
 		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
 	else
 #endif
 		add_mtd_device(&info->mtd);

-	omap_nand_wp(&info->mtd, NAND_WP_OFF);
-
 	platform_set_drvdata(pdev, &info->mtd);

 	return 0;

^ permalink raw reply related	[flat|nested] 5+ messages in thread
* [PATCH 1/3] mtd omap2 nand driver: extend to work with omap3 boards
@ 2008-06-11 18:18 Steve Sakoman
  2008-06-23 11:35 ` Tony Lindgren
  0 siblings, 1 reply; 5+ messages in thread
From: Steve Sakoman @ 2008-06-11 18:18 UTC (permalink / raw)
  To: linux-omap; +Cc: Teerth Reddy, Steve Sakoman

From: Teerth Reddy <teerth@ti.com>, Steve Sakoman <steve@sakoman.com>

Extend omap2 mtd nand driver to work with ARCH_OMAP3 boards

Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
 Kconfig |    6 -
 omap2.c |  230 ++++++++++++++++++++++++++++++++++++++++------------------------
 2 files changed, 147 insertions(+), 89 deletions(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3d5e432..02b9ced 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -70,10 +70,10 @@ config MTD_NAND_AMS_DELTA
 	  Support for NAND flash on Amstrad E3 (Delta).
 
 config MTD_NAND_OMAP2
-	tristate "NAND Flash device on OMAP 2420H4/2430SDP boards"
-	depends on (ARM && ARCH_OMAP2 && MTD_NAND)
+	tristate "NAND Flash device on OMAP2 and OMAP3"
+	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
 	help
-          Support for NAND flash on Texas Instruments 2430SDP/2420H4 platforms.
+          Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
 
 config MTD_NAND_OMAP
 	tristate "NAND Flash device on OMAP H3/H2/P2 boards"
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 3b7307c..3aac1d2 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -111,15 +111,6 @@
 static const char *part_probes[] = { "cmdlinepart", NULL };
 #endif
 
-static int hw_ecc = 1;
-
-/* new oob placement block for use with hardware ecc generation */
-static struct nand_ecclayout omap_hw_eccoob = {
-	.eccbytes = 12,
-	.eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
-	.oobfree = {{16, 32}, {33, 63} },
-};
-
 struct omap_nand_info {
 	struct nand_hw_control		controller;
 	struct omap_nand_platform_data	*pdata;
@@ -133,6 +124,13 @@ struct omap_nand_info {
 	void __iomem			*gpmc_cs_baseaddr;
 	void __iomem			*gpmc_baseaddr;
 };
+
+/*
+ * omap_nand_wp - This function enable or disable the Write Protect feature on
+ * NAND device
+ * @mtd: MTD device structure
+ * @mode: WP ON/OFF
+ */
 static void omap_nand_wp(struct mtd_info *mtd, int mode)
 {
 	struct omap_nand_info *info = container_of(mtd,
@@ -189,11 +187,11 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 }
 
 /*
-* omap_read_buf - read data from NAND controller into buffer
-* @mtd: MTD device structure
-* @buf: buffer to store date
-* @len: number of bytes to read
-*/
+ * omap_read_buf - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
 static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct omap_nand_info *info = container_of(mtd,
@@ -207,11 +205,11 @@ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 }
 
 /*
-* omap_write_buf - write buffer to NAND controller
-* @mtd: MTD device structure
-* @buf: data buffer
-* @len: number of bytes to write
-*/
+ * omap_write_buf - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
 static void omap_write_buf(struct mtd_info *mtd, const u_char * buf, int len)
 {
 	struct omap_nand_info *info = container_of(mtd,
@@ -250,10 +248,16 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
 	return 0;
 }
 
+#ifdef CONFIG_MTD_NAND_OMAP_HWECC
+/*
+ * omap_hwecc_init-Initialize the Hardware ECC for NAND flash in GPMC controller
+ * @mtd: MTD device structure
+ */
 static void omap_hwecc_init(struct mtd_info *mtd)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
+	register struct nand_chip *chip = mtd->priv;
 	unsigned long val = 0x0;
 
 	/* Read from ECC Control Register */
@@ -264,16 +268,15 @@ static void omap_hwecc_init(struct mtd_info *mtd)
 
 	/* Read from ECC Size Config Register */
 	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
-	/* ECCSIZE1=512 | ECCSIZE0=8bytes | Select eccResultsize[0123] */
-	val = ((0x000000FF<<22) | (0x00000003<<12) | (0x0000000F));
+	/* ECCSIZE1=512 | Select eccResultsize[0-3] */
+	val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
 	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
-
-
 }
 
 /*
- * This function will generate true ECC value, which can be used
+ * gen_true_ecc - This function will generate true ECC value, which can be used
  * when correcting data read from NAND flash memory core
+ * @ecc_buf: buffer to store ecc code
  */
 static void gen_true_ecc(u8 *ecc_buf)
 {
@@ -289,8 +292,12 @@ static void gen_true_ecc(u8 *ecc_buf)
 }
 
 /*
- * This function compares two ECC's and indicates if there is an error.
- * If the error can be corrected it will be corrected to the buffer
+ * omap_compare_ecc - This function compares two ECC's and indicates if there
+ * is an error. If the error can be corrected it will be corrected to the
+ * buffer
+ * @ecc_data1:  ecc code from nand spare area
+ * @ecc_data2:  ecc code from hardware register obtained from hardware ecc
+ * @page_data:  page data
  */
 static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
 			    u8 *ecc_data2,	/* read from register */
@@ -409,6 +416,14 @@ static int omap_compare_ecc(u8 *ecc_data1,	/* read from NAND memory */
 	}
 }
 
+/*
+ * omap_correct_data - Compares the ecc read from nand spare area with ECC
+ * registers values and corrects one bit error if it has occured
+ * @mtd: MTD device structure
+ * @dat: page data
+ * @read_ecc: ecc read from nand flash
+ * @calc_ecc: ecc read from ECC registers
+ */
 static int omap_correct_data(struct mtd_info *mtd, u_char * dat,
 				u_char * read_ecc, u_char * calc_ecc)
 {
@@ -436,65 +451,64 @@ static int omap_correct_data(struct mtd_info *mtd, u_char * dat,
 }
 
 /*
-** Generate non-inverted ECC bytes.
-**
-** Using noninverted ECC can be considered ugly since writing a blank
-** page ie. padding will clear the ECC bytes. This is no problem as long
-** nobody is trying to write data on the seemingly unused page.
-**
-** Reading an erased page will produce an ECC mismatch between
-** generated and read ECC bytes that has to be dealt with separately.
-*/
+ * omap_calcuate_ecc - Generate non-inverted ECC bytes.
+ * Using noninverted ECC can be considered ugly since writing a blank
+ * page ie. padding will clear the ECC bytes. This is no problem as long
+ * nobody is trying to write data on the seemingly unused page. Reading
+ * an erased page will produce an ECC mismatch between generated and read
+ * ECC bytes that has to be dealt with separately.
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ */
 static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 				u_char *ecc_code)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
 	unsigned long val = 0x0;
-	unsigned long reg, n;
-
-	/* Ex NAND_ECC_HW12_2048 */
-	if ((info->nand.ecc.mode == NAND_ECC_HW) &&
-		(info->nand.ecc.size  == 2048))
-		n = 4;
-	else
-		n = 1;
+	unsigned long reg;
 
 	/* Start Reading from HW ECC1_Result = 0x200 */
 	reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
-	while (n--) {
-		val = __raw_readl(reg);
-		*ecc_code++ = val;		/* P128e, ..., P1e */
-		*ecc_code++ = val >> 16;	/* P128o, ..., P1o */
-		/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
-		*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-		reg += 4;
-	}
+	val = __raw_readl(reg);
+	*ecc_code++ = val;          /* P128e, ..., P1e */
+	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
+	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+	reg += 4;
 
 	return 0;
-} /* omap_calculate_ecc */
+}
 
+/*
+ * omap_enable_hwecc - This function enables the hardware ecc functionality
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ */
 static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
+	register struct nand_chip *chip = mtd->priv;
+	unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
 	unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);
 
 	switch (mode) {
 	case NAND_ECC_READ    :
 		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
-		val = (1 << 7) | (0x0) | (0x1) ;
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
 		break;
 	case NAND_ECC_READSYN :
-		__raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
-		val = (1 << 7) | (0x0) | (0x1) ;
+		 __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
 		break;
 	case NAND_ECC_WRITE   :
 		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* ECC 16 bit col) | ( CS 0 )  | ECC Enable */
-		val = (1 << 7) | (0x0) | (0x1) ;
+		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
 		break;
 	default:
 		DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n",
@@ -504,7 +518,38 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
 
 	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG);
 }
+#endif
 
+/*
+ * omap_wait - Wait function is called during Program and erase
+ * operations and the way it is called from MTD layer, we should wait
+ * till the NAND chip is ready after the programming/erase operation
+ * has completed.
+ * @mtd: MTD device structure
+ * @chip: NAND Chip structure
+ */
+static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+	register struct nand_chip *this = mtd->priv;
+	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+							mtd);
+	int status = 0;
+
+	this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr +
+						GPMC_CS_NAND_COMMAND;
+	this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA;
+
+	while (!(status & 0x40)) {
+		 __raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W);
+		status = __raw_readb(this->IO_ADDR_R);
+	}
+	return status;
+}
+
+/*
+ * omap_dev_ready - calls the platform specific dev_ready function
+ * @mtd: MTD device structure
+ */
 static int omap_dev_ready(struct mtd_info *mtd)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
@@ -534,7 +579,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	struct omap_nand_info		*info;
 	struct omap_nand_platform_data	*pdata;
 	int				err;
-	unsigned long val;
+	unsigned long 			val;
 
 
 	pdata = pdev->dev.platform_data;
@@ -568,15 +613,20 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	}
 
 	/* Enable RD PIN Monitoring Reg */
-	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
-	val |= WR_RD_PIN_MONITORING;
-	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
+	if (pdata->dev_ready) {
+		val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
+		val |= WR_RD_PIN_MONITORING;
+		gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
+	}
 
 	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7);
 	val &= ~(0xf << 8);
 	val |=  (0xc & 0xf) << 8;
 	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val);
 
+	/* NAND write protect off */
+	omap_nand_wp(&info->mtd, NAND_WP_OFF);
+
 	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
 				pdev->dev.driver->name)) {
 		err = -EBUSY;
@@ -597,29 +647,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	info->nand.write_buf  = omap_write_buf;
 	info->nand.verify_buf = omap_verify_buf;
 
-	info->nand.dev_ready  = omap_dev_ready;
-	info->nand.chip_delay = 0;
-
-	/* Options */
-	info->nand.options   = NAND_BUSWIDTH_16;
-	info->nand.options  |= NAND_SKIP_BBTSCAN;
-
-	if (hw_ecc) {
-		/* init HW ECC */
-		omap_hwecc_init(&info->mtd);
-
-		info->nand.ecc.calculate = omap_calculate_ecc;
-		info->nand.ecc.hwctl     = omap_enable_hwecc;
-		info->nand.ecc.correct   = omap_correct_data;
-		info->nand.ecc.mode      = NAND_ECC_HW;
-		info->nand.ecc.bytes     = 12;
-		info->nand.ecc.size      = 2048;
-		info->nand.ecc.layout    = &omap_hw_eccoob;
-
+	/*
+	* If RDY/BSY line is connected to OMAP then use the omap ready funcrtion
+	* and the generic nand_wait function which reads the status register
+	* after monitoring the RDY/BSY line.Otherwise use a standard chip delay
+	* which is slightly more than tR (AC Timing) of the NAND device and read
+	* status register until you get a failure or success
+	*/
+	if (pdata->dev_ready) {
+		info->nand.dev_ready = omap_dev_ready;
+		info->nand.chip_delay = 0;
 	} else {
-		info->nand.ecc.mode = NAND_ECC_SOFT;
+		info->nand.waitfunc = omap_wait;
+		info->nand.chip_delay = 50;
 	}
 
+	info->nand.options  |= NAND_SKIP_BBTSCAN;
+	if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000)
+								== 0x1000)
+		info->nand.options  |= NAND_BUSWIDTH_16;
+
+#ifdef CONFIG_MTD_NAND_OMAP_HWECC
+	info->nand.ecc.bytes		= 3;
+	info->nand.ecc.size		= 512;
+	info->nand.ecc.calculate	= omap_calculate_ecc;
+	info->nand.ecc.hwctl		= omap_enable_hwecc;
+	info->nand.ecc.correct		= omap_correct_data;
+	info->nand.ecc.mode		= NAND_ECC_HW;
+
+	/* init HW ECC */
+	omap_hwecc_init(&info->mtd);
+#else
+	info->nand.ecc.mode = NAND_ECC_SOFT;
+#endif
 
 	/* DIP switches on some boards change between 8 and 16 bit
 	 * bus widths for flash.  Try the other width if the first try fails.
@@ -636,14 +696,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
 	if (err > 0)
 		add_mtd_partitions(&info->mtd, info->parts, err);
-	else if (err < 0 && pdata->parts)
+	else if (err <= 0 && pdata->parts)
 		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
 	else
 #endif
 		add_mtd_device(&info->mtd);
 
-	omap_nand_wp(&info->mtd, NAND_WP_OFF);
-
 	platform_set_drvdata(pdev, &info->mtd);
 
 	return 0;

^ permalink raw reply related	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-06-23 15:12 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-01  6:38 [PATCH 1/3] mtd omap2 nand driver: extend to work with omap3 boards Steve Sakoman
2008-06-10 21:27 ` Tony Lindgren
  -- strict thread matches above, loose matches on Subject: below --
2008-06-11 18:18 Steve Sakoman
2008-06-23 11:35 ` Tony Lindgren
2008-06-23 15:11   ` Koen Kooi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox