public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Arun KS <getarunks@gmail.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [ PATCH 2/3 ] net:smc911x Modify driver to also work with omap24xx
Date: Thu, 3 Jul 2008 13:14:56 +0300	[thread overview]
Message-ID: <20080703101452.GF14276@atomide.com> (raw)
In-Reply-To: <dfeb90390806260817o3d2dd180qbe97c77be44de94@mail.gmail.com>

* Arun KS <getarunks@gmail.com> [080626 18:17]:
> On Thu, Jun 26, 2008 at 5:52 PM, Tony Lindgren <tony@atomide.com> wrote:
> > Hi,
> >
> > * Arun KS <getarunks@gmail.com> [080624 15:14]:
> >> net:smc911x Modify driver to also work with omap24xx
> >
> > Few comments below.
> >
> > Also, can you please send this to the Linux netdev mailing list?
> > Also Cc linux-omap list too.
> >
> >> Signed-off-by: Arun KS <arunks@mistralsolutions.com>
> >> ---
> >>  drivers/net/Kconfig   |    2 +-
> >>  drivers/net/smc911x.h |    5 +++++
> >>  2 files changed, 6 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> >> index 61ecee7..17d0a9c 100644
> >> --- a/drivers/net/Kconfig
> >> +++ b/drivers/net/Kconfig
> >> @@ -955,7 +955,7 @@ config SMC911X
> >>     tristate "SMSC LAN911[5678] support"
> >>     select CRC32
> >>     select MII
> >> -   depends on ARCH_PXA || SH_MAGIC_PANEL_R2 || ARCH_OMAP34XX
> >> +   depends on ARCH_PXA || SH_MAGIC_PANEL_R2 || ARCH_OMAP34XX || ARCH_OMAP24XX
> >>     help
> >>       This is a driver for SMSC's LAN911x series of Ethernet chipsets
> >>       including the new LAN9115, LAN9116, LAN9117, and LAN9118.
> >
> > Maybe have ARCH_OMAP24XX before ARCH_OMAP34XX to be consistent
> > how it's done elsewhere.
> >
> >
> >> diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
> >> index dad93a8..0f406a0 100644
> >> --- a/drivers/net/smc911x.h
> >> +++ b/drivers/net/smc911x.h
> >> @@ -47,6 +47,11 @@
> >>    #define SMC_USE_32BIT        1
> >>    #define SMC_IRQ_SENSE        IRQF_TRIGGER_LOW
> >>    #define SMC_MEM_RESERVED 1
> >> +#elif defined(CONFIG_ARCH_OMAP24XX)
> >> +  #define SMC_USE_16BIT        0
> >> +  #define SMC_USE_32BIT        1
> >> +  #define SMC_IRQ_SENSE        IRQF_TRIGGER_LOW
> >> +  #define SMC_MEM_RESERVED 1
> Here i used the tab itself, when this patch is applied it comes pretty fine in
> the code. I checked the patch with checkpatch.pl also. Can you tell me
> what is going wrong?
> 
> After code formating issues are resolved i can resend the patch again.

OK, I was just looking the patch. I trust you on the formatting issue :)

Tony

> 
> Regards,
> Arun
> >>  #endif
> >
> > You should probably use tabs here in the new code even if old code
> > does not.
> >
> > Regards,
> >
> > Tony
> >
> >>
> >>
> >> --
> >> 1.5.3.4
> >
> >> From 8b45bfd40aca7d5f89195f95d668bae78e2dbba9 Mon Sep 17 00:00:00 2001
> >> From: Arun KS <arunks@mistralsolutions.com>
> >> Date: Tue, 24 Jun 2008 17:33:08 +0530
> >> Subject: [PATCH] net:smc911x Modify driver to also work with omap24xx
> >>
> >> net:smc911x Modify driver to also work with omap24xx
> >>
> >> Signed-off-by: Arun KS <arunks@mistralsolutions.com>
> >> ---
> >>  drivers/net/Kconfig   |    2 +-
> >>  drivers/net/smc911x.h |    5 +++++
> >>  2 files changed, 6 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> >> index 61ecee7..17d0a9c 100644
> >> --- a/drivers/net/Kconfig
> >> +++ b/drivers/net/Kconfig
> >> @@ -955,7 +955,7 @@ config SMC911X
> >>       tristate "SMSC LAN911[5678] support"
> >>       select CRC32
> >>       select MII
> >> -     depends on ARCH_PXA || SH_MAGIC_PANEL_R2 || ARCH_OMAP34XX
> >> +     depends on ARCH_PXA || SH_MAGIC_PANEL_R2 || ARCH_OMAP34XX || ARCH_OMAP24XX
> >>       help
> >>         This is a driver for SMSC's LAN911x series of Ethernet chipsets
> >>         including the new LAN9115, LAN9116, LAN9117, and LAN9118.
> >> diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
> >> index dad93a8..0f406a0 100644
> >> --- a/drivers/net/smc911x.h
> >> +++ b/drivers/net/smc911x.h
> >> @@ -47,6 +47,11 @@
> >>    #define SMC_USE_32BIT              1
> >>    #define SMC_IRQ_SENSE              IRQF_TRIGGER_LOW
> >>    #define SMC_MEM_RESERVED   1
> >> +#elif defined(CONFIG_ARCH_OMAP24XX)
> >> +  #define SMC_USE_16BIT              0
> >> +  #define SMC_USE_32BIT              1
> >> +  #define SMC_IRQ_SENSE              IRQF_TRIGGER_LOW
> >> +  #define SMC_MEM_RESERVED   1
> >>  #endif
> >>
> >>
> >> --
> >> 1.5.3.4
> >>
> >
> >

      reply	other threads:[~2008-07-03 12:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-24 12:14 [ PATCH 2/3 ] net:smc911x Modify driver to also work with omap24xx Arun KS
2008-06-26 12:22 ` Tony Lindgren
2008-06-26 15:17   ` Arun KS
2008-07-03 10:14     ` Tony Lindgren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080703101452.GF14276@atomide.com \
    --to=tony@atomide.com \
    --cc=getarunks@gmail.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox