From: Paul Walmsley <paul@pwsan.com>
To: linux-omap@vger.kernel.org
Cc: Rajendra Nayak <rnayak@ti.com>
Subject: [PATCH 5/9] OMAP2 SDRC: add timing data for Micron MT46H32M32LF-6
Date: Mon, 07 Jul 2008 20:54:59 -0600 [thread overview]
Message-ID: <20080708025447.11646.48874.stgit@localhost.localdomain> (raw)
In-Reply-To: <20080708025225.11646.55912.stgit@localhost.localdomain>
Add timing data for the Micron MT46H32M32LF-6 SDRAM chip, used on the
OMAP3 Beagle and EVM boards. Original timing data is from the Micron
datasheet PDF downloaded from:
http://download.micron.com/pdf/datasheets/dram/mobile/1gb_ddr_mobile_sdram_t48m.pdf
Thanks to Rajendra Nayak <rnayak@ti.com> for his help identifying
the chips used on Beagle & OMAP3EVM.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/board-omap3beagle.c | 4 +-
arch/arm/mach-omap2/board-omap3evm.c | 4 +-
arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h | 55 +++++++++++++++++++++
include/asm-arm/arch-omap/sdrc.h | 2 -
4 files changed, 62 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3523611..bf4b430 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -33,6 +33,8 @@
#include <asm/arch/hsmmc.h>
#include <asm/arch/common.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
+
static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
@@ -47,7 +49,7 @@ static int __init omap3_beagle_i2c_init(void)
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 1ba8a45..df81706 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -37,6 +37,8 @@
#include <asm/arch/common.h>
#include <asm/arch/mcspi.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
+
static struct resource omap3evm_smc911x_resources[] = {
[0] = {
.start = OMAP3EVM_ETHR_START,
@@ -188,7 +190,7 @@ static struct platform_device omap3evm_kp_device = {
static void __init omap3_evm_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
omap3evm_init_smc911x();
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 0000000..f0ec104
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <asm/arch/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf_sdrc_params[] = {
+ [0] = {
+ .rate = 165941176,
+ .actim_ctrla = 0x9a9db4c6,
+ .actim_ctrlb = 0x00011217,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 133333333,
+ .actim_ctrla = 0x7a19b485,
+ .actim_ctrlb = 0x00011213,
+ .rfr_ctrl = 0x0003de01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 82970588,
+ .actim_ctrla = 0x51512283,
+ .actim_ctrlb = 0x0001120c,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [3] = {
+ .rate = 66666666,
+ .actim_ctrla = 0x410d2243,
+ .actim_ctrlb = 0x0001120a,
+ .rfr_ctrl = 0x0001d601,
+ .mr = 0x00000032,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h
index 00ba539..1d974a0 100644
--- a/include/asm-arm/arch-omap/sdrc.h
+++ b/include/asm-arm/arch-omap/sdrc.h
@@ -102,7 +102,7 @@ struct omap_sdrc_params {
u32 mr;
};
-void __init omap2_sdrc_init(void);
+void __init omap2_sdrc_init(struct omap_sdrc_params *);
struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
#ifdef CONFIG_ARCH_OMAP2
next prev parent reply other threads:[~2008-07-08 2:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-08 2:54 [PATCH 0/9] OMAP2/3 SDRC/clock: control CORE M2 divider, clean up SDRC Paul Walmsley
2008-07-08 2:54 ` [PATCH 1/9] OMAP2 SDRC: move mach-omap2/memory.h into include/asm-arm/arch-omap/sdrc.h Paul Walmsley
2008-07-08 2:54 ` [PATCH 2/9] OMAP2 SDRC: rename memory.c to sdrc2xxx.c Paul Walmsley
2008-07-08 2:54 ` [PATCH 3/9] OMAP2 SDRC: separate common OMAP2/3 code from OMAP2xxx code Paul Walmsley
2008-07-08 2:54 ` [PATCH 4/9] OMAP2 SDRC: add SDRAM timing parameter infrastructure Paul Walmsley
2008-07-08 2:54 ` Paul Walmsley [this message]
2008-08-12 17:07 ` [PATCH 5/9] OMAP2 SDRC: add timing data for Micron MT46H32M32LF-6 Steve Sakoman
2008-08-12 21:42 ` Paul Walmsley
2008-07-08 2:55 ` [PATCH 6/9] OMAP2 SDRC: add timing data for Qimonda HYB18M512160AF-6 Paul Walmsley
2008-07-08 2:55 ` [PATCH 7/9] OMAP3 SRAM: remove unused functions; rename remainder Paul Walmsley
2008-07-08 2:55 ` [PATCH 8/9] OMAP3 clock/SRAM: fix CORE DPLL M2 divider mask Paul Walmsley
2008-07-08 2:55 ` [PATCH 9/9] OMAP3 clock: add omap3_core_dpll_m2_set_rate() Paul Walmsley
2008-07-08 4:20 ` Paul Walmsley
2008-07-08 4:37 ` [PATCH 0/9] OMAP2/3 SDRC/clock: control CORE M2 divider, clean up SDRC Rajendra Nayak
2008-07-08 22:12 ` Paul Walmsley
2008-07-08 23:12 ` Woodruff, Richard
2008-07-08 23:46 ` Paul Walmsley
2008-07-08 23:55 ` Woodruff, Richard
2008-07-09 1:06 ` Paul Walmsley
2008-07-15 7:58 ` Paul Walmsley
2008-07-09 4:42 ` Rajendra Nayak
2008-08-05 12:13 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080708025447.11646.48874.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-omap@vger.kernel.org \
--cc=rnayak@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox