* [PATCH 0/3 v2] OMAP3 Beagle: Enable nand support
@ 2008-08-04 15:57 Dirk Behme
2008-08-05 9:09 ` Tony Lindgren
0 siblings, 1 reply; 2+ messages in thread
From: Dirk Behme @ 2008-08-04 15:57 UTC (permalink / raw)
To: linux-omap@vger.kernel.org; +Cc: Steve Sakoman
This series of patches adds NAND support to the BeagleBoard.
The first patch in the series builds on work by Teerth Reddy
<teerth@ti.com> and Steve Sakoman <sakoman@gmail.com> to extend the
omap2 nand driver to work with both omap2 and omap3 architectures (as
well as adding/clarifying comments).
The second patch adds the beagle nand support, and the final patch
enables the nand driver and jffs2 support in the beagle defconfig.
The patch set was reviewed by Khasim Syed Mohammed <khasim@ti.com>
prior to this submission. It was tested on Rev A and B BeagleBoards.
This v2 replaces http://marc.info/?l=linux-omap&m=121230229625544&w=2
Changes in v2:
- Apply cleanly to recent git (defconfig, drivers/mtd/nand/omap2.c)
- Beagle has only NAND. This results in small config. Move
configuration to board-omap3beagle.c and don't create a new file
board-omap3beagle-flash.c for it.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH 0/3 v2] OMAP3 Beagle: Enable nand support
2008-08-04 15:57 [PATCH 0/3 v2] OMAP3 Beagle: Enable nand support Dirk Behme
@ 2008-08-05 9:09 ` Tony Lindgren
0 siblings, 0 replies; 2+ messages in thread
From: Tony Lindgren @ 2008-08-05 9:09 UTC (permalink / raw)
To: Dirk Behme; +Cc: linux-omap@vger.kernel.org, Steve Sakoman
* Dirk Behme <dirk.behme@googlemail.com> [080804 19:01]:
> This series of patches adds NAND support to the BeagleBoard.
>
> The first patch in the series builds on work by Teerth Reddy
> <teerth@ti.com> and Steve Sakoman <sakoman@gmail.com> to extend the
> omap2 nand driver to work with both omap2 and omap3 architectures (as
> well as adding/clarifying comments).
>
> The second patch adds the beagle nand support, and the final patch
> enables the nand driver and jffs2 support in the beagle defconfig.
>
> The patch set was reviewed by Khasim Syed Mohammed <khasim@ti.com> prior
> to this submission. It was tested on Rev A and B BeagleBoards.
>
> This v2 replaces http://marc.info/?l=linux-omap&m=121230229625544&w=2
>
> Changes in v2:
>
> - Apply cleanly to recent git (defconfig, drivers/mtd/nand/omap2.c)
> - Beagle has only NAND. This results in small config. Move configuration
> to board-omap3beagle.c and don't create a new file
> board-omap3beagle-flash.c for it.
Pushing this series today.
Tony
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-08-05 9:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-04 15:57 [PATCH 0/3 v2] OMAP3 Beagle: Enable nand support Dirk Behme
2008-08-05 9:09 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox