From: Tony Lindgren <tony@atomide.com>
To: chandra shekhar <x0044955@ti.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH 2/2] McBSP preamble patch for 34xx support,
Date: Fri, 8 Aug 2008 09:26:16 +0300 [thread overview]
Message-ID: <20080808062612.GD24923@atomide.com> (raw)
In-Reply-To: <34251.192.168.10.89.1218175609.squirrel@dbdmail.itg.ti.com>
Hi,
* chandra shekhar <x0044955@ti.com> [080808 09:07]:
> Hi,
>
> this patch modifies the read write function to do
> 16/32 bit read write depending on CPU.
>
> Regards,
> Chandra Shekhar
>
> Signed-off-by: Chandra Shekhar< x0044955@ti.com>
> ---
> arch/arm/mach-omap1/mcbsp.c | 1 +
> arch/arm/mach-omap2/mcbsp.c | 3 +++
> arch/arm/plat-omap/mcbsp.c | 24 +++++++++++++++++++++++-
> include/asm-arm/arch-omap/mcbsp.h | 5 +----
> 4 files changed, 28 insertions(+), 5 deletions(-)
>
> Index: linux-omap-2.6/arch/arm/mach-omap1/mcbsp.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap1/mcbsp.c 2008-08-07
> 16:40:14.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap1/mcbsp.c 2008-08-07 16:46:30.000000000 +0530
> @@ -248,6 +248,7 @@
> GFP_KERNEL);
> if (!mcbsp_ptr)
> return -ENOMEM;
> + mcbsp_32_bit_ops = 0;
>
> if (cpu_is_omap730())
> omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
> Index: linux-omap-2.6/arch/arm/mach-omap2/mcbsp.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/mcbsp.c 2008-08-07
> 16:41:17.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/mcbsp.c 2008-08-07 16:50:53.000000000 +0530
> @@ -232,6 +232,7 @@
>
> if (cpu_is_omap24xx())
> omap_mcbsp_count = OMAP24XX_MCBSP_PDATA_SZ;
> +
> if (cpu_is_omap34xx())
> omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
>
> @@ -246,6 +247,8 @@
> if (cpu_is_omap34xx())
> omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
> OMAP34XX_MCBSP_PDATA_SZ);
> + if (!cpu_is_omap2420())
> + mcbsp_32_bit_ops = 1;
>
> return omap_mcbsp_init();
> }
> Index: linux-omap-2.6/arch/arm/plat-omap/mcbsp.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/plat-omap/mcbsp.c 2008-08-07
> 16:39:51.000000000 +0530
> +++ linux-omap-2.6/arch/arm/plat-omap/mcbsp.c 2008-08-07 16:45:00.000000000 +0530
> @@ -29,9 +29,31 @@
>
> struct omap_mcbsp **mcbsp_ptr;
> int omap_mcbsp_count;
> +int mcbsp_32_bit_ops;
> +
> +void omap_mcbsp_write(u32 io_base, u16 reg, u32 val)
> +{
> + if (!mcbsp_32_bit_ops)
> + __raw_writew((u16)val, io_base + reg);
> + else
> + __raw_writel(val, io_base + reg);
> +}
> +
> +int omap_mcbsp_read(u32 io_base, u16 reg)
> +{
> + if (!mcbsp_32_bit_ops)
> + return __raw_readw(io_base + reg);
> + else
> + return __raw_readl(io_base + reg);
> +}
> +
The 16 vs 32-bit test above would be better done with cpu_is_omap2420()
than setting mcbsp_32_bit_ops. If 2420 is not selected, the test gets
optimized out as cpu_is_omap2420() is defined as 0.
Regards,
Tony
> +#define OMAP_MCBSP_READ(base, reg) \
> + omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg)
> +#define OMAP_MCBSP_WRITE(base, reg, val) \
> + omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val)
>
> #define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
> -#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
> +#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
>
> static void omap_mcbsp_dump_reg(u8 id)
> {
> Index: linux-omap-2.6/include/asm-arm/arch-omap/mcbsp.h
> ===================================================================
> --- linux-omap-2.6.orig/include/asm-arm/arch-omap/mcbsp.h 2008-08-07
> 16:41:17.000000000 +0530
> +++ linux-omap-2.6/include/asm-arm/arch-omap/mcbsp.h 2008-08-07
> 16:45:00.000000000 +0530
> @@ -139,10 +139,6 @@
>
> #endif
>
> -#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg)
> -#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) +
> OMAP_MCBSP_REG_##reg)
> -
> -
> /************************** McBSP SPCR1 bit definitions ***********************/
> #define RRST 0x0001
> #define RRDY 0x0002
> @@ -369,6 +365,7 @@
> };
> extern struct omap_mcbsp **mcbsp_ptr;
> extern int omap_mcbsp_count;
> +extern int mcbsp_32_bit_ops;
>
> int omap_mcbsp_init(void);
> void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-08-08 6:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-08 6:06 [PATCH 2/2] McBSP preamble patch for 34xx support, chandra shekhar
2008-08-08 6:26 ` Tony Lindgren [this message]
2008-08-08 6:52 ` shekhar, chandra
2008-08-08 6:59 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080808062612.GD24923@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap@vger.kernel.org \
--cc=x0044955@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox