Re: [PATCH 0/2] OMAP2/3: fix clock/clockdomain bugs

[Tony Lindgren <tony@atomide.com>]

* Paul Walmsley <paul@pwsan.com> [080813 00:34]:
> This series fixes two bugs that cause N800 to panic on boot:
> 
> - a OMAP2xxx clock code bug, which caused an "Unhandled fault:
>   alignment exception (0x001) at 0xc02....." panic; and
> 
> - an OMAP2/3 clockdomain bug, which caused an "Unable to handle kernel
>   paging request at virtual address 5f75706d" panic.
> 
> These bugs were exposed by 0e5194e1a84c219bebbb78f305b7a8eabc4a3656 and
> 718fc6cd4db902aa2242a736cc3feb8744a4c71a.

Great, thanks! Pushing today.

> With the following patches applied on git head, N800 boots fine, but
> only if CONFIG_DEBUG_LL is enabled.  If it is disabled, it hangs at
> some point in early boot.  Don't know why.

Maybe it needs flasher --enable-rd-mode --set-rd-flags=serial-console?

> These patches also boot-tested cleanly on 2430SDP and 3430SDP, both
> with and without CONFIG_DEBUG_LL.

Good

Tony

>    text    data     bss     dec     hex filename
> 3217805  149808   85008 3452621  34aecd vmlinux.n800.orig
> 3217837  149808   85008 3452653  34aeed vmlinux.n800
> 
>  arch/arm/mach-omap2/clock24xx.c   |    2 ++
>  arch/arm/mach-omap2/clockdomain.c |    6 ++++++
>  2 files changed, 8 insertions(+), 0 deletions(-)
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html