Re: [PATCH] [MTD] OneNAND OMAP3: add delay for GPIO

[Tony Lindgren <tony@atomide.com>]

* Adrian Hunter <ext-adrian.hunter@nokia.com> [080814 14:21]:
> On OMAP3, the driver was occasionally not seeing the GPIO
> interrupt.  Adding a small delay of one register read
> eliminates the problem.

Pushing to linux-omap tree.

Tony

> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
> ---
> drivers/mtd/onenand/omap2.c |    9 +++++++--
> 1 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
> index 2bd8746..bf6bba5 100644
> --- a/drivers/mtd/onenand/omap2.c
> +++ b/drivers/mtd/onenand/omap2.c
> @@ -141,8 +141,13 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
>
> 		/* Turn interrupts on */
> 		syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
> -		syscfg |= ONENAND_SYS_CFG1_IOBE;
> -		write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
> +		if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
> +			syscfg |= ONENAND_SYS_CFG1_IOBE;
> +			write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
> +			if (cpu_is_omap34xx())
> +				/* Add a delay to let GPIO settle */
> +				syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
> +		}
>
> 		INIT_COMPLETION(c->irq_done);
> 		if (c->gpio_irq) {
> -- 
> 1.5.4.3
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html