Re: [patch 2.6.27-rc3-omap1] tweak musb_hdrc SOC init code

[Tony Lindgren <tony@atomide.com>]

* David Brownell <david-b@pacbell.net> [080902 12:58]:
> On Tuesday 02 September 2008, Felipe Balbi wrote:
> > 
> > > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > 
> > Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
> > 
> > > +
> > > +     /* REVISIT charge pump on TWL4030 can supply up to
> > > +      * 100 mA ... but this value is board-specific, like
> > > +      * "mode", and should be passed to usb_musb_init().
> > > +      */
> > > +     .power          = 50,                   /* up to 100 mA */
> > 
> > We can add some parameters to usb_musb_init();
> > Something similar should be done to hsmmc_init(), as of now it only
> > registers one slot and some boards have more than one.
> 
> Let's wait till the twl4030 usb init gets some board-specific
> parameterization.  The MUSB init code should be called after
> the TWL4030 is initialized, so it can use TWL facilities right
> away.

Pushing this to l-o tree today.

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html