Re: [PATCH] Patch for Touch Screen noise on OMAP3EVM.

[Tony Lindgren <tony@atomide.com>]

* anaveen@mistralsolutions.com <anaveen@mistralsolutions.com> [080907 22:54]:
> 
> 
> When git kernel tree is used on a OMAP3EVM board file for touch screen  
> testing, it shows lot of jitter. With this patch the jitter can be  
> reduced.

This does not seem to apply, can you please refresh?

Thanks,

Tony

> Signed-off-by: Naveen Atmakuri <anaveen@mistralsolutions.com>
> ---
>   arch/arm/mach-omap2/board-omap3evm.c |   10 ++++++++++
>   1 files changed, 10 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c  
> b/arch/arm/mach-omap2/board-omap3evm.c
> index 4963f0f..9a4784e 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -27,6 +27,8 @@
>   #include <asm/mach-types.h>
>   #include <asm/mach/arch.h>
>   #include <asm/mach/map.h>
> +#include <linux/io.h>
> +#include <linux/delay.h>
> 
>   #include <mach/gpio.h>
>   #include <mach/keypad.h>
> @@ -132,8 +134,16 @@ static int ads7846_get_pendown_state(void)
>   }
> 
>   struct ads7846_platform_data ads7846_config = {
> +	.x_max                  = 0x0fff,
> +	.y_max                  = 0x0fff,
> +	.x_plate_ohms           = 180,
> +	.pressure_max           = 255,
> +	.debounce_max           = 10,
> +	.debounce_tol           = 3,
> +	.debounce_rep           = 1,
>   	.get_pendown_state	= ads7846_get_pendown_state,
>   	.keep_vref_on		= 1,
> +	.settle_delay_usecs     = 150,
>   };
> 
>   static struct omap2_mcspi_device_config ads7846_mcspi_config = {
> -- 
> 1.5.6
> 
> Warm Regards,
> Naveen Atmakuri.
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html