From: "George G. Davis" <gdavis@mvista.com>
To: Felipe Balbi <felipe.balbi@nokia.com>
Cc: linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>,
Russel King <rmk@dyn-67.arm.linux.org.uk>,
wim@iguana.be, David Brownell <david-b@pacbell.net>
Subject: Re: [PATCH] watchdog: another ioremap() fix
Date: Thu, 18 Sep 2008 14:29:19 -0400 [thread overview]
Message-ID: <20080918182919.GL17377@mvista.com> (raw)
In-Reply-To: <1221746146-18252-1-git-send-email-felipe.balbi@nokia.com>
On Thu, Sep 18, 2008 at 04:55:46PM +0300, Felipe Balbi wrote:
> convert to use ioremap() and __raw_{read/write} friends.
>
> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: George G. Davis <gdavis@mvista.com>
> ---
> drivers/watchdog/omap_wdt.c | 52 +++++++++++++++++++++++++-----------------
> 1 files changed, 31 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
> index b111dec..e395743 100644
> --- a/drivers/watchdog/omap_wdt.c
> +++ b/drivers/watchdog/omap_wdt.c
> @@ -71,12 +71,12 @@ static void omap_wdt_ping(struct omap_wdt_dev *wdev)
> {
> void __iomem *base = wdev->base;
> /* wait for posted write to complete */
> - while ((omap_readl(base + OMAP_WATCHDOG_WPS)) & 0x08)
> + while ((__raw_readl(base + OMAP_WATCHDOG_WPS)) & 0x08)
> cpu_relax();
> wdt_trgr_pattern = ~wdt_trgr_pattern;
> - omap_writel(wdt_trgr_pattern, (base + OMAP_WATCHDOG_TGR));
> + __raw_writel(wdt_trgr_pattern, (base + OMAP_WATCHDOG_TGR));
> /* wait for posted write to complete */
> - while ((omap_readl(base + OMAP_WATCHDOG_WPS)) & 0x08)
> + while ((__raw_readl(base + OMAP_WATCHDOG_WPS)) & 0x08)
> cpu_relax();
> /* reloaded WCRR from WLDR */
> }
> @@ -86,11 +86,11 @@ static void omap_wdt_enable(struct omap_wdt_dev *wdev)
> void __iomem *base;
> base = wdev->base;
> /* Sequence to enable the watchdog */
> - omap_writel(0xBBBB, base + OMAP_WATCHDOG_SPR);
> - while ((omap_readl(base + OMAP_WATCHDOG_WPS)) & 0x10)
> + __raw_writel(0xBBBB, base + OMAP_WATCHDOG_SPR);
> + while ((__raw_readl(base + OMAP_WATCHDOG_WPS)) & 0x10)
> cpu_relax();
> - omap_writel(0x4444, base + OMAP_WATCHDOG_SPR);
> - while ((omap_readl(base + OMAP_WATCHDOG_WPS)) & 0x10)
> + __raw_writel(0x4444, base + OMAP_WATCHDOG_SPR);
> + while ((__raw_readl(base + OMAP_WATCHDOG_WPS)) & 0x10)
> cpu_relax();
> }
>
> @@ -99,11 +99,11 @@ static void omap_wdt_disable(struct omap_wdt_dev *wdev)
> void __iomem *base;
> base = wdev->base;
> /* sequence required to disable watchdog */
> - omap_writel(0xAAAA, base + OMAP_WATCHDOG_SPR); /* TIMER_MODE */
> - while (omap_readl(base + OMAP_WATCHDOG_WPS) & 0x10)
> + __raw_writel(0xAAAA, base + OMAP_WATCHDOG_SPR); /* TIMER_MODE */
> + while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x10)
> cpu_relax();
> - omap_writel(0x5555, base + OMAP_WATCHDOG_SPR); /* TIMER_MODE */
> - while (omap_readl(base + OMAP_WATCHDOG_WPS) & 0x10)
> + __raw_writel(0x5555, base + OMAP_WATCHDOG_SPR); /* TIMER_MODE */
> + while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x10)
> cpu_relax();
> }
>
> @@ -123,10 +123,10 @@ static void omap_wdt_set_timeout(struct omap_wdt_dev *wdev)
> base = wdev->base;
>
> /* just count up at 32 KHz */
> - while (omap_readl(base + OMAP_WATCHDOG_WPS) & 0x04)
> + while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x04)
> cpu_relax();
> - omap_writel(pre_margin, base + OMAP_WATCHDOG_LDR);
> - while (omap_readl(base + OMAP_WATCHDOG_WPS) & 0x04)
> + __raw_writel(pre_margin, base + OMAP_WATCHDOG_LDR);
> + while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x04)
> cpu_relax();
> }
>
> @@ -152,10 +152,10 @@ static int omap_wdt_open(struct inode *inode, struct file *file)
> }
>
> /* initialize prescaler */
> - while (omap_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
> + while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
> cpu_relax();
> - omap_writel((1 << 5) | (PTV << 2), base + OMAP_WATCHDOG_CNTRL);
> - while (omap_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
> + __raw_writel((1 << 5) | (PTV << 2), base + OMAP_WATCHDOG_CNTRL);
> + while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
> cpu_relax();
>
> file->private_data = (void *) wdev;
> @@ -225,7 +225,7 @@ omap_wdt_ioctl(struct inode *inode, struct file *file,
> return put_user(0, (int __user *)arg);
> case WDIOC_GETBOOTSTATUS:
> if (cpu_is_omap16xx())
> - return put_user(omap_readw(ARM_SYSST),
> + return put_user(__raw_readw(ARM_SYSST),
> (int __user *)arg);
> if (cpu_is_omap24xx())
> return put_user(omap_prcm_get_reset_sources(),
> @@ -324,7 +324,12 @@ static int __init omap_wdt_probe(struct platform_device *pdev)
> goto fail;
> }
> }
> - wdev->base = (void __iomem *) (mem->start);
> + wdev->base = ioremap(res->start, res->end - res->start + 1);
> + if (!wdev->base) {
> + ret = -ENOMEM;
> + goto fail;
> + }
> +
> platform_set_drvdata(pdev, wdev);
>
> omap_wdt_disable(wdev);
> @@ -340,11 +345,11 @@ static int __init omap_wdt_probe(struct platform_device *pdev)
> goto fail;
>
> pr_info("OMAP Watchdog Timer Rev 0x%02x: initial timeout %d sec\n",
> - omap_readl(wdev->base + OMAP_WATCHDOG_REV) & 0xFF,
> + __raw_readl(wdev->base + OMAP_WATCHDOG_REV) & 0xFF,
> timer_margin);
>
> /* autogate OCP interface clock */
> - omap_writel(0x01, wdev->base + OMAP_WATCHDOG_SYS_CONFIG);
> + __raw_writel(0x01, wdev->base + OMAP_WATCHDOG_SYS_CONFIG);
>
> omap_wdt_dev = pdev;
>
> @@ -359,6 +364,8 @@ fail:
> clk_put(wdev->mpu_wdt_ick);
> if (wdev->mpu_wdt_fck)
> clk_put(wdev->mpu_wdt_fck);
> + if (wdev->base)
> + iounmap(wdev->base);
> kfree(wdev);
> }
> if (mem) {
> @@ -396,6 +403,9 @@ static int omap_wdt_remove(struct platform_device *pdev)
> clk_put(wdev->mpu_wdt_fck);
> wdev->mpu_wdt_fck = NULL;
> }
> + if (wdev->base)
> + iounmap(wdev->base);
> +
arch/arm/plat-omap/devices.c
> kfree(wdev);
> omap_wdt_dev = NULL;
> return 0;
> --
> 1.6.0.1.308.gede4c
next prev parent reply other threads:[~2008-09-18 18:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-18 13:55 [PATCH] watchdog: another ioremap() fix Felipe Balbi
2008-09-18 17:03 ` David Brownell
2008-09-18 17:26 ` Felipe Balbi
2008-09-19 8:06 ` Wim Van Sebroeck
2008-09-18 19:50 ` Russell King - ARM Linux
2008-09-18 20:02 ` Felipe Balbi
2008-09-18 20:15 ` Russell King - ARM Linux
2008-09-18 20:34 ` Russell King - ARM Linux
2008-09-18 20:55 ` Felipe Balbi
2008-09-19 8:30 ` Wim Van Sebroeck
2008-09-18 20:10 ` David Brownell
2008-09-21 18:20 ` Tony Lindgren
2008-09-18 18:29 ` George G. Davis [this message]
2008-09-18 18:40 ` Felipe Balbi
2008-09-18 18:45 ` George G. Davis
2008-09-18 18:49 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080918182919.GL17377@mvista.com \
--to=gdavis@mvista.com \
--cc=david-b@pacbell.net \
--cc=felipe.balbi@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=rmk@dyn-67.arm.linux.org.uk \
--cc=tony@atomide.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox