* [PATCH 0/0] Refreshed omap2 patches, v3
@ 2008-10-03 11:56 Tony Lindgren
2008-10-03 11:56 ` [PATCH 01/07] ARM: OMAP2 Provide function to enable/disable uart clocks Tony Lindgren
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: Tony Lindgren @ 2008-10-03 11:56 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap, Tony Lindgren
Hi all,
Here are the refreshed omap2 patches that are still remaining
from the earlier series [1] before the header move and other
omap changes in Russell's devel branch.
Some of the patches have been moved to Paul Walmsley's queue [2],
and some to new omap3 queue, and some patches have been updated
to merge in some new additions and fixes.
I'll repost the omap3 queue shortly following these patches.
Regards,
Tony
[1] http://article.gmane.org/gmane.linux.ports.arm.omap/10390
[2] http://thread.gmane.org/gmane.linux.ports.arm.omap/12320
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 01/07] ARM: OMAP2 Provide function to enable/disable uart clocks
2008-10-03 11:56 [PATCH 0/0] Refreshed omap2 patches, v3 Tony Lindgren
@ 2008-10-03 11:56 ` Tony Lindgren
2008-10-03 11:56 ` [PATCH 02/07] ARM: OMAP2: Move sleep.S into sleep24xx.S Tony Lindgren
2008-10-03 12:13 ` [PATCH 0/0] Refreshed omap2 patches, v3 Tony Lindgren
2008-10-08 7:42 ` git-pull request for omap2 changes (Re: [PATCH 0/0] Refreshed omap2 patches, v3) Tony Lindgren
2 siblings, 1 reply; 14+ messages in thread
From: Tony Lindgren @ 2008-10-03 11:56 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap, Jouni Hogander, Tony Lindgren
From: Jouni Hogander <jouni.hogander@nokia.com>
This patch adds common function to enable/disable omap2/3 uart
clocks. Enabled uarts are passed by bootloader in atags and clocks for
these enabled uarts are touched.
Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0cbe452..4dcf39c 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -3,7 +3,7 @@
*
* OMAP2 serial support.
*
- * Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2005-2008 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* Based off of arch/arm/mach-omap/omap1/serial.c
@@ -22,12 +22,8 @@
#include <mach/common.h>
#include <mach/board.h>
-static struct clk * uart1_ick = NULL;
-static struct clk * uart1_fck = NULL;
-static struct clk * uart2_ick = NULL;
-static struct clk * uart2_fck = NULL;
-static struct clk * uart3_ick = NULL;
-static struct clk * uart3_fck = NULL;
+static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
+static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
static struct plat_serial8250_port serial_platform_data[] = {
{
@@ -37,7 +33,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = OMAP16XX_BASE_BAUD * 16,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
@@ -45,7 +41,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = OMAP16XX_BASE_BAUD * 16,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
@@ -53,7 +49,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = OMAP16XX_BASE_BAUD * 16,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
@@ -86,10 +82,27 @@ static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
}
-void __init omap_serial_init()
+void omap_serial_enable_clocks(int enable)
+{
+ int i;
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+ if (uart_ick[i] && uart_fck[i]) {
+ if (enable) {
+ clk_enable(uart_ick[i]);
+ clk_enable(uart_fck[i]);
+ } else {
+ clk_disable(uart_ick[i]);
+ clk_disable(uart_fck[i]);
+ }
+ }
+ }
+}
+
+void __init omap_serial_init(void)
{
int i;
const struct omap_uart_config *info;
+ char name[16];
/*
* Make sure the serial ports are muxed on at this point.
@@ -97,8 +110,7 @@ void __init omap_serial_init()
* if not needed.
*/
- info = omap_get_config(OMAP_TAG_UART,
- struct omap_uart_config);
+ info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
if (info == NULL)
return;
@@ -112,53 +124,21 @@ void __init omap_serial_init()
continue;
}
- switch (i) {
- case 0:
- uart1_ick = clk_get(NULL, "uart1_ick");
- if (IS_ERR(uart1_ick))
- printk("Could not get uart1_ick\n");
- else {
- clk_enable(uart1_ick);
- }
-
- uart1_fck = clk_get(NULL, "uart1_fck");
- if (IS_ERR(uart1_fck))
- printk("Could not get uart1_fck\n");
- else {
- clk_enable(uart1_fck);
- }
- break;
- case 1:
- uart2_ick = clk_get(NULL, "uart2_ick");
- if (IS_ERR(uart2_ick))
- printk("Could not get uart2_ick\n");
- else {
- clk_enable(uart2_ick);
- }
-
- uart2_fck = clk_get(NULL, "uart2_fck");
- if (IS_ERR(uart2_fck))
- printk("Could not get uart2_fck\n");
- else {
- clk_enable(uart2_fck);
- }
- break;
- case 2:
- uart3_ick = clk_get(NULL, "uart3_ick");
- if (IS_ERR(uart3_ick))
- printk("Could not get uart3_ick\n");
- else {
- clk_enable(uart3_ick);
- }
-
- uart3_fck = clk_get(NULL, "uart3_fck");
- if (IS_ERR(uart3_fck))
- printk("Could not get uart3_fck\n");
- else {
- clk_enable(uart3_fck);
- }
- break;
- }
+ sprintf(name, "uart%d_ick", i+1);
+ uart_ick[i] = clk_get(NULL, name);
+ if (IS_ERR(uart_ick[i])) {
+ printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+ uart_ick[i] = NULL;
+ } else
+ clk_enable(uart_ick[i]);
+
+ sprintf(name, "uart%d_fck", i+1);
+ uart_fck[i] = clk_get(NULL, name);
+ if (IS_ERR(uart_fck[i])) {
+ printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+ uart_fck[i] = NULL;
+ } else
+ clk_enable(uart_fck[i]);
omap_serial_reset(p);
}
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0609311..515c628 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -34,6 +34,7 @@ struct sys_timer;
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
extern void omap_serial_init(void);
+extern void omap_serial_enable_clocks(int enable);
#ifdef CONFIG_I2C_OMAP
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 515b89b..8a676a0 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -20,11 +20,17 @@
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x4806e000
+#elif defined(CONFIG_ARCH_OMAP3)
+/* OMAP3 serial ports */
+#define OMAP_UART1_BASE 0x4806a000
+#define OMAP_UART2_BASE 0x4806c000
+#define OMAP_UART3_BASE 0x49020000
#endif
#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
+#define OMAP24XX_BASE_BAUD (48000000/16)
#define is_omap_port(pt) ({int __ret = 0; \
if ((pt)->port.mapbase == OMAP_UART1_BASE || \
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 02/07] ARM: OMAP2: Move sleep.S into sleep24xx.S
2008-10-03 11:56 ` [PATCH 01/07] ARM: OMAP2 Provide function to enable/disable uart clocks Tony Lindgren
@ 2008-10-03 11:56 ` Tony Lindgren
2008-10-03 11:56 ` [PATCH 03/07] ARM: OMAP2: Use omap_globals for CPU detection for multi-omap Tony Lindgren
0 siblings, 1 reply; 14+ messages in thread
From: Tony Lindgren @ 2008-10-03 11:56 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap, Tony Lindgren
Some register offsets are different for 242x and 243x. This
will allow compiling sleep code for both chips into the same
kernel. Pass the addresses for SDRC_DDLA_CTRL and SDRC_POWER to the
omap24xx_cpu_suspend instead of loading the values since the only.
Also fix a bug to call omap2_sram_suspend with the value of SDRC_DLLA_CTRL
instead of the address as that's what omap24xx_cpu_suspend expects to
determine between DDR and SDR. This bug has not been noticed as
the boards seem to have DDR instead of SDR.
Note that some PM patches are still missing. The PM patches will
be added later on once the base files are in sync with linux-omap
tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e7cf1b4..800639e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -14,7 +14,10 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+ifeq ($(CONFIG_PM),y)
+obj-y += pm.o
+obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+endif
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep24xx.S
similarity index 85%
rename from arch/arm/mach-omap2/sleep.S
rename to arch/arm/mach-omap2/sleep24xx.S
index 87a706f..43336b9 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -5,6 +5,10 @@
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
+ * (C) Copyright 2006 Nokia Corporation
+ * Fixed idle loop sleep
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -26,6 +30,8 @@
#include <mach/io.h>
#include <mach/pm.h>
+#include <mach/omap24xx.h>
+
#include "sdrc.h"
/* First address of reserved address space? apparently valid for OMAP2 & 3 */
@@ -52,15 +58,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
.word . - omap24xx_idle_loop_suspend
/*
- * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing
+ * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
* SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
* SDRC.
*
* Input:
* R0 : DLL ctrl value pre-Sleep
- * R1 : Processor+Revision
- * 2420: 0x21 = 242xES1, 0x26 = 242xES2.2
- * 2430: 0x31 = 2430ES1, 0x32 = 2430ES2
+ * R1 : SDRC_DLLA_CTRL
+ * R2 : SDRC_POWER
*
* The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
* when we get called, but the DLL probably isn't. We will wait a bit more in
@@ -80,15 +85,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
*/
ENTRY(omap24xx_cpu_suspend)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
- mov r3, #0x0 @ clear for mrc call
+ mov r3, #0x0 @ clear for mcr call
mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
nop
nop
- ldr r3, A_SDRC_POWER @ addr of sdrc power
- ldr r4, [r3] @ value of sdrc power
+ ldr r4, [r2] @ read SDRC_POWER
orr r4, r4, #0x40 @ enable self refresh on idle req
mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
- str r4, [r3] @ make it so
+ str r4, [r2] @ make it so
mov r2, #0
nop
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
@@ -97,14 +101,13 @@ loop:
subs r5, r5, #0x1 @ awake, wait just a bit
bne loop
- /* The DPLL has on before we take the DDR out of self refresh */
+ /* The DPLL has to be on before we take the DDR out of self refresh */
bic r4, r4, #0x40 @ now clear self refresh bit.
- str r4, [r3] @ put vlaue back.
+ str r4, [r2] @ write to SDRC_POWER
ldr r4, A_SDRC0 @ make a clock happen
- ldr r4, [r4]
+ ldr r4, [r4] @ read A_SDRC0
nop @ start auto refresh only after clk ok
movs r0, r0 @ see if DDR or SDR
- ldrne r1, A_SDRC_DLLA_CTRL_S @ get addr of DLL ctrl
strne r0, [r1] @ rewrite DLLA to force DLL reload
addne r1, r1, #0x8 @ move to DLLB
strne r0, [r1] @ rewrite DLLB to force DLL reload
@@ -116,13 +119,8 @@ loop2:
/* resume*/
ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-A_SDRC_POWER:
- .word OMAP242X_SDRC_REGADDR(SDRC_POWER)
A_SDRC0:
.word A_SDRC0_V
-A_SDRC_DLLA_CTRL_S:
- .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
ENTRY(omap24xx_cpu_suspend_sz)
.word . - omap24xx_cpu_suspend
-
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 6063e96..768eb6e 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -135,7 +135,8 @@ extern void omap_pm_suspend(void);
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 03/07] ARM: OMAP2: Use omap_globals for CPU detection for multi-omap
2008-10-03 11:56 ` [PATCH 02/07] ARM: OMAP2: Move sleep.S into sleep24xx.S Tony Lindgren
@ 2008-10-03 11:56 ` Tony Lindgren
2008-10-03 11:56 ` [PATCH 04/07] ARM: OMAP2: Add pinmux support for omap34xx Tony Lindgren
0 siblings, 1 reply; 14+ messages in thread
From: Tony Lindgren @ 2008-10-03 11:56 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap, Tony Lindgren
This allows to get rid of the ifdefs and will allow simpler
CPU detection in the future.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 7342128..bf45ff3 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -18,24 +18,15 @@
#include <asm/cputype.h>
+#include <mach/common.h>
#include <mach/control.h>
#include <mach/cpu.h>
-#if defined(CONFIG_ARCH_OMAP2420)
-#define TAP_BASE IO_ADDRESS(0x48014000)
-#elif defined(CONFIG_ARCH_OMAP2430)
-#define TAP_BASE IO_ADDRESS(0x4900A000)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define TAP_BASE IO_ADDRESS(0x4830A000)
-#endif
+static u32 class;
+static void __iomem *tap_base;
+static u16 tap_prod_id;
#define OMAP_TAP_IDCODE 0x0204
-#if defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP_TAP_PROD_ID 0x0210
-#else
-#define OMAP_TAP_PROD_ID 0x0208
-#endif
-
#define OMAP_TAP_DIE_ID_0 0x0218
#define OMAP_TAP_DIE_ID_1 0x021C
#define OMAP_TAP_DIE_ID_2 0x0220
@@ -94,18 +85,24 @@ static u32 __init read_tap_reg(int reg)
* it means its Cortex r0p0 which is 3430 ES1
*/
if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
+
+ if (reg == tap_prod_id) {
+ regval = 0x000F00F0;
+ goto out;
+ }
+
switch (reg) {
case OMAP_TAP_IDCODE : regval = 0x0B7AE02F; break;
/* Making DevType as 0xF in ES1 to differ from ES2 */
- case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break;
case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break;
}
} else
- regval = __raw_readl(TAP_BASE + reg);
+ regval = __raw_readl(tap_base + reg);
+out:
return regval;
}
@@ -204,7 +201,7 @@ void __init omap2_check_revision(void)
u8 rev;
idcode = read_tap_reg(OMAP_TAP_IDCODE);
- prod_id = read_tap_reg(OMAP_TAP_PROD_ID);
+ prod_id = read_tap_reg(tap_prod_id);
hawkeye = (idcode >> 12) & 0xffff;
rev = (idcode >> 28) & 0x0f;
dev_type = (prod_id >> 16) & 0x0f;
@@ -269,3 +266,13 @@ void __init omap2_check_revision(void)
}
+void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
+{
+ class = omap2_globals->class;
+ tap_base = omap2_globals->tap;
+
+ if (class == 0x3430)
+ tap_prod_id = 0x0210;
+ else
+ tap_prod_id = 0x0208;
+}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 434beae..0843b88 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -248,6 +248,7 @@ static struct omap_globals *omap2_globals;
static void __init __omap2_set_globals(void)
{
+ omap2_set_globals_tap(omap2_globals);
omap2_set_globals_memory(omap2_globals);
omap2_set_globals_control(omap2_globals);
omap2_set_globals_prcm(omap2_globals);
@@ -258,6 +259,7 @@ static void __init __omap2_set_globals(void)
#if defined(CONFIG_ARCH_OMAP2420)
static struct omap_globals omap242x_globals = {
+ .class = OMAP242X_CLASS,
.tap = OMAP2_IO_ADDRESS(0x48014000),
.sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
.sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
@@ -276,6 +278,7 @@ void __init omap2_set_globals_242x(void)
#if defined(CONFIG_ARCH_OMAP2430)
static struct omap_globals omap243x_globals = {
+ .class = OMAP243X_CLASS,
.tap = OMAP2_IO_ADDRESS(0x4900a000),
.sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
.sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
@@ -294,6 +297,7 @@ void __init omap2_set_globals_243x(void)
#if defined(CONFIG_ARCH_OMAP3430)
static struct omap_globals omap343x_globals = {
+ .class = OMAP343X_CLASS,
.tap = OMAP2_IO_ADDRESS(0x4830A000),
.sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
.sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 515c628..ef70e2b 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -50,6 +50,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
/* IO bases for various OMAP processors */
struct omap_globals {
+ u32 class; /* OMAP class to detect */
void __iomem *tap; /* Control module ID code */
void __iomem *sdrc; /* SDRAM Controller */
void __iomem *sms; /* SDRAM Memory Scheduler */
@@ -63,6 +64,7 @@ void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
void omap2_set_globals_memory(struct omap_globals *);
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 05aee0e..e046418 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -346,9 +346,14 @@ IS_OMAP_TYPE(3430, 0x3430)
get_sil_revision(system_rev)
/* Various silicon macros defined here */
+#define OMAP242X_CLASS 0x24200000
#define OMAP2420_REV_ES1_0 0x24200000
#define OMAP2420_REV_ES2_0 0x24201000
+
+#define OMAP243X_CLASS 0x24300000
#define OMAP2430_REV_ES1_0 0x24300000
+
+#define OMAP343X_CLASS 0x34300000
#define OMAP3430_REV_ES1_0 0x34300000
#define OMAP3430_REV_ES2_0 0x34301000
#define OMAP3430_REV_ES2_1 0x34302000
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 04/07] ARM: OMAP2: Add pinmux support for omap34xx
2008-10-03 11:56 ` [PATCH 03/07] ARM: OMAP2: Use omap_globals for CPU detection for multi-omap Tony Lindgren
@ 2008-10-03 11:56 ` Tony Lindgren
2008-10-03 11:56 ` [PATCH 05/07] ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremap Tony Lindgren
0 siblings, 1 reply; 14+ messages in thread
From: Tony Lindgren @ 2008-10-03 11:56 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap, Vikram Pandita, Jarkko Nikula, Tony Lindgren
From: Vikram Pandita <vikram.pandita@ti.com>
This patch adds pinmux support for OMAP3. Incorporated review comments
from Tony to make mux_value as bit mask. Tested on 3430SDP.
Also merge in adding of I2C pins from Jarkko Nikula.
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 6b7d672..4f44414 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-omap2/mux.c
*
- * OMAP2 pin multiplexing configurations
+ * OMAP2 and OMAP3 pin multiplexing configurations
*
* Copyright (C) 2004 - 2008 Texas Instruments Inc.
* Copyright (C) 2003 - 2008 Nokia Corporation
@@ -220,16 +220,179 @@ MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1)
#define OMAP24XX_PINS_SZ 0
#endif /* CONFIG_ARCH_OMAP24XX */
-#define OMAP24XX_PULL_ENA (1 << 3)
-#define OMAP24XX_PULL_UP (1 << 4)
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct pin_config __initdata_or_module omap34xx_pins[] = {
+/*
+ * Name, reg-offset,
+ * mux-mode | [active-mode | off-mode]
+ */
+
+/* 34xx I2C */
+MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 1*/
+MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 2*/
+MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 3*/
+MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+};
+
+#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
+
+#else
+#define omap34xx_pins NULL
+#define OMAP34XX_PINS_SZ 0
+#endif /* CONFIG_ARCH_OMAP34XX */
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
+static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
{
u16 orig;
u8 warn = 0, debug = 0;
- orig = omap_ctrl_readb(cfg->mux_reg);
+ if (cpu_is_omap24xx())
+ orig = omap_ctrl_readb(cfg->mux_reg);
+ else
+ orig = omap_ctrl_readw(cfg->mux_reg);
#ifdef CONFIG_OMAP_MUX_DEBUG
debug = cfg->debug;
@@ -255,9 +418,9 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
spin_lock_irqsave(&mux_spin_lock, flags);
reg |= cfg->mask & 0x7;
if (cfg->pull_val)
- reg |= OMAP24XX_PULL_ENA;
+ reg |= OMAP2_PULL_ENA;
if (cfg->pu_pd_val)
- reg |= OMAP24XX_PULL_UP;
+ reg |= OMAP2_PULL_UP;
omap2_cfg_debug(cfg, reg);
omap_ctrl_writeb(reg, cfg->mux_reg);
spin_unlock_irqrestore(&mux_spin_lock, flags);
@@ -265,7 +428,26 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
return 0;
}
#else
-#define omap24xx_cfg_reg 0
+#define omap24xx_cfg_reg NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
+{
+ static DEFINE_SPINLOCK(mux_spin_lock);
+ unsigned long flags;
+ u16 reg = 0;
+
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ reg |= cfg->mux_val;
+ omap2_cfg_debug(cfg, reg);
+ omap_ctrl_writew(reg, cfg->mux_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+
+ return 0;
+}
+#else
+#define omap34xx_cfg_reg NULL
#endif
int __init omap2_mux_init(void)
@@ -274,6 +456,10 @@ int __init omap2_mux_init(void)
arch_mux_cfg.pins = omap24xx_pins;
arch_mux_cfg.size = OMAP24XX_PINS_SZ;
arch_mux_cfg.cfg_reg = omap24xx_cfg_reg;
+ } else if (cpu_is_omap34xx()) {
+ arch_mux_cfg.pins = omap34xx_pins;
+ arch_mux_cfg.size = OMAP34XX_PINS_SZ;
+ arch_mux_cfg.cfg_reg = omap34xx_cfg_reg;
}
return omap_mux_register(&arch_mux_cfg);
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 614b2c1..5670d56 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -125,20 +125,64 @@
.pu_pd_val = pull_mode, \
},
-
-#define PULL_DISABLED 0
-#define PULL_ENABLED 1
-
-#define PULL_DOWN 0
-#define PULL_UP 1
+/* 24xx/34xx mux bit defines */
+#define OMAP2_PULL_ENA (1 << 3)
+#define OMAP2_PULL_UP (1 << 4)
+#define OMAP2_ALTELECTRICALSEL (1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP3_INPUT_EN (1 << 8)
+#define OMAP3_OFF_EN (1 << 9)
+#define OMAP3_OFFOUT_EN (1 << 10)
+#define OMAP3_OFFOUT_VAL (1 << 11)
+#define OMAP3_OFF_PULL_EN (1 << 12)
+#define OMAP3_OFF_PULL_UP (1 << 13)
+#define OMAP3_WAKEUP_EN (1 << 14)
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define OMAP34XX_MUX_MODE0 0
+#define OMAP34XX_MUX_MODE1 1
+#define OMAP34XX_MUX_MODE2 2
+#define OMAP34XX_MUX_MODE3 3
+#define OMAP34XX_MUX_MODE4 4
+#define OMAP34XX_MUX_MODE5 5
+#define OMAP34XX_MUX_MODE6 6
+#define OMAP34XX_MUX_MODE7 7
+
+/* 34xx active pin states */
+#define OMAP34XX_PIN_OUTPUT 0
+#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN
+#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \
+ | OMAP2_PULL_UP)
+#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN)
+
+/* 34xx off mode states */
+#define OMAP34XX_PIN_OFF_NONE 0
+#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
+ | OMAP3_OFFOUT_VAL)
+#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
+#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
+ | OMAP3_OFF_PULL_UP)
+#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
+#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN
+
+#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \
+ .name = desc, \
+ .debug = 0, \
+ .mux_reg = reg_offset, \
+ .mux_val = mux_value \
+},
struct pin_config {
- char *name;
- unsigned char busy;
- unsigned char debug;
+ char *name;
+ const unsigned int mux_reg;
+ unsigned char debug;
- const char *mux_reg_name;
- const unsigned int mux_reg;
+#if defined(CONFIG_ARCH_OMAP34XX)
+ u16 mux_val; /* Wake-up, off mode, pull, mux mode */
+#endif
+
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
const unsigned char mask_offset;
const unsigned char mask;
@@ -150,6 +194,12 @@ struct pin_config {
const char *pu_pd_name;
const unsigned int pu_pd_reg;
const unsigned char pu_pd_val;
+#endif
+
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+ const char *mux_reg_name;
+#endif
+
};
enum omap730_index {
@@ -593,6 +643,90 @@ enum omap24xx_index {
};
+enum omap34xx_index {
+ /* 34xx I2C */
+ K21_34XX_I2C1_SCL,
+ J21_34XX_I2C1_SDA,
+ AF15_34XX_I2C2_SCL,
+ AE15_34XX_I2C2_SDA,
+ AF14_34XX_I2C3_SCL,
+ AG14_34XX_I2C3_SDA,
+ AD26_34XX_I2C4_SCL,
+ AE26_34XX_I2C4_SDA,
+
+ /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+ Y8_3430_USB1HS_PHY_CLK,
+ Y9_3430_USB1HS_PHY_STP,
+ AA14_3430_USB1HS_PHY_DIR,
+ AA11_3430_USB1HS_PHY_NXT,
+ W13_3430_USB1HS_PHY_DATA0,
+ W12_3430_USB1HS_PHY_DATA1,
+ W11_3430_USB1HS_PHY_DATA2,
+ Y11_3430_USB1HS_PHY_DATA3,
+ W9_3430_USB1HS_PHY_DATA4,
+ Y12_3430_USB1HS_PHY_DATA5,
+ W8_3430_USB1HS_PHY_DATA6,
+ Y13_3430_USB1HS_PHY_DATA7,
+
+ /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+ AA8_3430_USB2HS_PHY_CLK,
+ AA10_3430_USB2HS_PHY_STP,
+ AA9_3430_USB2HS_PHY_DIR,
+ AB11_3430_USB2HS_PHY_NXT,
+ AB10_3430_USB2HS_PHY_DATA0,
+ AB9_3430_USB2HS_PHY_DATA1,
+ W3_3430_USB2HS_PHY_DATA2,
+ T4_3430_USB2HS_PHY_DATA3,
+ T3_3430_USB2HS_PHY_DATA4,
+ R3_3430_USB2HS_PHY_DATA5,
+ R4_3430_USB2HS_PHY_DATA6,
+ T2_3430_USB2HS_PHY_DATA7,
+
+
+ /* TLL - HSUSB: 12-pin TLL Port 1*/
+ Y8_3430_USB1HS_TLL_CLK,
+ Y9_3430_USB1HS_TLL_STP,
+ AA14_3430_USB1HS_TLL_DIR,
+ AA11_3430_USB1HS_TLL_NXT,
+ W13_3430_USB1HS_TLL_DATA0,
+ W12_3430_USB1HS_TLL_DATA1,
+ W11_3430_USB1HS_TLL_DATA2,
+ Y11_3430_USB1HS_TLL_DATA3,
+ W9_3430_USB1HS_TLL_DATA4,
+ Y12_3430_USB1HS_TLL_DATA5,
+ W8_3430_USB1HS_TLL_DATA6,
+ Y13_3430_USB1HS_TLL_DATA7,
+
+ /* TLL - HSUSB: 12-pin TLL Port 2*/
+ AA8_3430_USB2HS_TLL_CLK,
+ AA10_3430_USB2HS_TLL_STP,
+ AA9_3430_USB2HS_TLL_DIR,
+ AB11_3430_USB2HS_TLL_NXT,
+ AB10_3430_USB2HS_TLL_DATA0,
+ AB9_3430_USB2HS_TLL_DATA1,
+ W3_3430_USB2HS_TLL_DATA2,
+ T4_3430_USB2HS_TLL_DATA3,
+ T3_3430_USB2HS_TLL_DATA4,
+ R3_3430_USB2HS_TLL_DATA5,
+ R4_3430_USB2HS_TLL_DATA6,
+ T2_3430_USB2HS_TLL_DATA7,
+
+ /* TLL - HSUSB: 12-pin TLL Port 3*/
+ AA6_3430_USB3HS_TLL_CLK,
+ AB3_3430_USB3HS_TLL_STP,
+ AA3_3430_USB3HS_TLL_DIR,
+ Y3_3430_USB3HS_TLL_NXT,
+ AA5_3430_USB3HS_TLL_DATA0,
+ Y4_3430_USB3HS_TLL_DATA1,
+ Y5_3430_USB3HS_TLL_DATA2,
+ W5_3430_USB3HS_TLL_DATA3,
+ AB12_3430_USB3HS_TLL_DATA4,
+ AB13_3430_USB3HS_TLL_DATA5,
+ AA13_3430_USB3HS_TLL_DATA6,
+ AA12_3430_USB3HS_TLL_DATA7
+
+};
+
struct omap_mux_cfg {
struct pin_config *pins;
unsigned long size;
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 05/07] ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremap
2008-10-03 11:56 ` [PATCH 04/07] ARM: OMAP2: Add pinmux support for omap34xx Tony Lindgren
@ 2008-10-03 11:56 ` Tony Lindgren
2008-10-03 11:56 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree Tony Lindgren
0 siblings, 1 reply; 14+ messages in thread
From: Tony Lindgren @ 2008-10-03 11:56 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap, Paul Walmsley, Tony Lindgren
From: Paul Walmsley <paul@pwsan.com>
Fix sparse, checkpatch warnings fro GPMC code.
Also change to use ioremap, and add missing function prototypes
to gpmc.h.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index c114338..ae83ed5 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -9,27 +9,23 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#undef DEBUG
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
+#include <linux/module.h>
#include <linux/io.h>
#include <asm/mach-types.h>
#include <mach/gpmc.h>
-#undef DEBUG
-
-#ifdef CONFIG_ARCH_OMAP2420
-#define GPMC_BASE 0x6800a000
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2430
-#define GPMC_BASE 0x6E000000
-#endif
+#include "memory.h"
+/* GPMC register offsets */
#define GPMC_REVISION 0x00
#define GPMC_SYSCONFIG 0x10
#define GPMC_SYSSTATUS 0x14
@@ -51,7 +47,6 @@
#define GPMC_CS0 0x60
#define GPMC_CS_SIZE 0x30
-#define GPMC_CS_NUM 8
#define GPMC_MEM_START 0x00000000
#define GPMC_MEM_END 0x3FFFFFFF
#define BOOT_ROM_SPACE 0x100000 /* 1MB */
@@ -64,10 +59,9 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned gpmc_cs_map;
-static void __iomem *gpmc_base = IO_ADDRESS(GPMC_BASE);
-static void __iomem *gpmc_cs_base = IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+static void __iomem *gpmc_base;
-static struct clk *gpmc_fck;
+static struct clk *gpmc_l3_clk;
static void gpmc_write_reg(int idx, u32 val)
{
@@ -83,19 +77,32 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val)
{
void __iomem *reg_addr;
- reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx;
+ reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
__raw_writel(val, reg_addr);
}
u32 gpmc_cs_read_reg(int cs, int idx)
{
- return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
+ void __iomem *reg_addr;
+
+ reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+ return __raw_readl(reg_addr);
}
+/* TODO: Add support for gpmc_fck to clock framework and use it */
unsigned long gpmc_get_fclk_period(void)
{
- /* In picoseconds */
- return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000);
+ unsigned long rate = clk_get_rate(gpmc_l3_clk);
+
+ if (rate == 0) {
+ printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
+ return 0;
+ }
+
+ rate /= 1000;
+ rate = 1000000000 / rate; /* In picoseconds */
+
+ return rate;
}
unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
@@ -108,6 +115,11 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
return (time_ns * 1000 + tick_ps - 1) / tick_ps;
}
+unsigned int gpmc_ticks_to_ns(unsigned int ticks)
+{
+ return ticks * gpmc_get_fclk_period() / 1000;
+}
+
unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
{
unsigned long ticks = gpmc_ns_to_ticks(time_ns);
@@ -348,6 +360,7 @@ out:
spin_unlock(&gpmc_mem_lock);
return r;
}
+EXPORT_SYMBOL(gpmc_cs_request);
void gpmc_cs_free(int cs)
{
@@ -363,8 +376,9 @@ void gpmc_cs_free(int cs)
gpmc_cs_set_reserved(cs, 0);
spin_unlock(&gpmc_mem_lock);
}
+EXPORT_SYMBOL(gpmc_cs_free);
-void __init gpmc_mem_init(void)
+static void __init gpmc_mem_init(void)
{
int cs;
unsigned long boot_rom_space = 0;
@@ -394,12 +408,33 @@ void __init gpmc_mem_init(void)
void __init gpmc_init(void)
{
u32 l;
+ char *ck;
+
+ if (cpu_is_omap24xx()) {
+ ck = "core_l3_ck";
+ if (cpu_is_omap2420())
+ l = OMAP2420_GPMC_BASE;
+ else
+ l = OMAP34XX_GPMC_BASE;
+ } else if (cpu_is_omap34xx()) {
+ ck = "gpmc_fck";
+ l = OMAP34XX_GPMC_BASE;
+ }
- gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
- if (IS_ERR(gpmc_fck))
- WARN_ON(1);
- else
- clk_enable(gpmc_fck);
+ gpmc_l3_clk = clk_get(NULL, ck);
+ if (IS_ERR(gpmc_l3_clk)) {
+ printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
+ return -ENODEV;
+ }
+
+ gpmc_base = ioremap(l, SZ_4K);
+ if (!gpmc_base) {
+ clk_put(gpmc_l3_clk);
+ printk(KERN_ERR "Could not get GPMC register memory\n");
+ return -ENOMEM;
+ }
+
+ BUG_ON(IS_ERR(gpmc_l3_clk));
l = gpmc_read_reg(GPMC_REVISION);
printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 6a8e07f..4258e00 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -11,6 +11,9 @@
#ifndef __OMAP2_GPMC_H
#define __OMAP2_GPMC_H
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM 8
+
#define GPMC_CS_CONFIG1 0x00
#define GPMC_CS_CONFIG2 0x04
#define GPMC_CS_CONFIG3 0x08
@@ -81,6 +84,7 @@ struct gpmc_timings {
};
extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
extern unsigned long gpmc_get_fclk_period(void);
@@ -92,5 +96,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
+extern void gpmc_init(void);
#endif
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index bb8319d..556f0eb 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -48,6 +48,7 @@
#define OMAP2420_PRM_BASE OMAP2420_CM_BASE
#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
#define OMAP2420_SMS_BASE 0x68008000
+#define OMAP2420_GPMC_BASE 0x6800a000
#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree
2008-10-03 11:56 ` [PATCH 05/07] ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremap Tony Lindgren
@ 2008-10-03 11:56 ` Tony Lindgren
2008-10-03 11:56 ` [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code Tony Lindgren
2008-10-08 7:39 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v3 Tony Lindgren
0 siblings, 2 replies; 14+ messages in thread
From: Tony Lindgren @ 2008-10-03 11:56 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap, Tony Lindgren
Misc updates from linux-omap tree, mostly to update common
device initialization and add missing defines from linux-omap
tree. Also some changes to make room for adding 34xx in
following patches.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 99982d3..e382b43 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_BASE 0xfffea000
#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
static struct resource sti_resources[] = {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ea55f28..1fb330e 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,7 @@
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
+int omap2_clk_init(void);
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 2ee954a..cc5c294 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -23,49 +23,37 @@
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
+#include <mach/eac.h>
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
-#define OMAP2_I2C_BASE2 0x48072000
-#define OMAP2_I2C_INT2 57
-
-static struct resource i2c_resources2[] = {
+static struct resource cam_resources[] = {
{
- .start = OMAP2_I2C_BASE2,
- .end = OMAP2_I2C_BASE2 + 0x3f,
+ .start = OMAP24XX_CAMERA_BASE,
+ .end = OMAP24XX_CAMERA_BASE + 0xfff,
.flags = IORESOURCE_MEM,
},
{
- .start = OMAP2_I2C_INT2,
+ .start = INT_24XX_CAM_IRQ,
.flags = IORESOURCE_IRQ,
- },
+ }
};
-static struct platform_device omap_i2c_device2 = {
- .name = "i2c_omap",
- .id = 2,
- .num_resources = ARRAY_SIZE(i2c_resources2),
- .resource = i2c_resources2,
+static struct platform_device omap_cam_device = {
+ .name = "omap24xxcam",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cam_resources),
+ .resource = cam_resources,
};
-/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
-static void omap_init_i2c(void)
+static inline void omap_init_camera(void)
{
- /* REVISIT: Second I2C not in use on H4? */
- if (machine_is_omap_h4())
- return;
-
- if (!cpu_is_omap2430()) {
- omap_cfg_reg(J15_24XX_I2C2_SCL);
- omap_cfg_reg(H19_24XX_I2C2_SDA);
- }
- (void) platform_device_register(&omap_i2c_device2);
+ platform_device_register(&omap_cam_device);
}
-
#else
-
-static void omap_init_i2c(void) {}
-
+static inline void omap_init_camera(void)
+{
+}
#endif
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
@@ -104,7 +92,9 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP2_STI_BASE IO_ADDRESS(0x48068000)
+#if defined(CONFIG_ARCH_OMAP2)
+
+#define OMAP2_STI_BASE 0x48068000
#define OMAP2_STI_CHANNEL_BASE 0x54000000
#define OMAP2_STI_IRQ 4
@@ -124,6 +114,25 @@ static struct resource sti_resources[] = {
.flags = IORESOURCE_IRQ,
}
};
+#elif defined(CONFIG_ARCH_OMAP3)
+
+#define OMAP3_SDTI_BASE 0x54500000
+#define OMAP3_SDTI_CHANNEL_BASE 0x54600000
+
+static struct resource sti_resources[] = {
+ {
+ .start = OMAP3_SDTI_BASE,
+ .end = OMAP3_SDTI_BASE + 0xFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3_SDTI_CHANNEL_BASE,
+ .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+#endif
static struct platform_device sti_device = {
.name = "sti",
@@ -140,12 +149,14 @@ static inline void omap_init_sti(void)
static inline void omap_init_sti(void) {}
#endif
-#if defined(CONFIG_SPI_OMAP24XX)
+#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <mach/mcspi.h>
#define OMAP2_MCSPI1_BASE 0x48098000
#define OMAP2_MCSPI2_BASE 0x4809a000
+#define OMAP2_MCSPI3_BASE 0x480b8000
+#define OMAP2_MCSPI4_BASE 0x480ba000
static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
.num_cs = 4,
@@ -159,7 +170,7 @@ static struct resource omap2_mcspi1_resources[] = {
},
};
-struct platform_device omap2_mcspi1 = {
+static struct platform_device omap2_mcspi1 = {
.name = "omap2_mcspi",
.id = 1,
.num_resources = ARRAY_SIZE(omap2_mcspi1_resources),
@@ -181,7 +192,7 @@ static struct resource omap2_mcspi2_resources[] = {
},
};
-struct platform_device omap2_mcspi2 = {
+static struct platform_device omap2_mcspi2 = {
.name = "omap2_mcspi",
.id = 2,
.num_resources = ARRAY_SIZE(omap2_mcspi2_resources),
@@ -191,16 +202,162 @@ struct platform_device omap2_mcspi2 = {
},
};
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
+ .num_cs = 2,
+};
+
+static struct resource omap2_mcspi3_resources[] = {
+ {
+ .start = OMAP2_MCSPI3_BASE,
+ .end = OMAP2_MCSPI3_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi3 = {
+ .name = "omap2_mcspi",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(omap2_mcspi3_resources),
+ .resource = omap2_mcspi3_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi3_config,
+ },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
+ .num_cs = 1,
+};
+
+static struct resource omap2_mcspi4_resources[] = {
+ {
+ .start = OMAP2_MCSPI4_BASE,
+ .end = OMAP2_MCSPI4_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi4 = {
+ .name = "omap2_mcspi",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(omap2_mcspi4_resources),
+ .resource = omap2_mcspi4_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi4_config,
+ },
+};
+#endif
+
static void omap_init_mcspi(void)
{
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+ platform_device_register(&omap2_mcspi3);
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ platform_device_register(&omap2_mcspi4);
+#endif
}
#else
static inline void omap_init_mcspi(void) {}
#endif
+#ifdef CONFIG_SND_OMAP24XX_EAC
+
+#define OMAP2_EAC_BASE 0x48090000
+
+static struct resource omap2_eac_resources[] = {
+ {
+ .start = OMAP2_EAC_BASE,
+ .end = OMAP2_EAC_BASE + 0x109,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_eac_device = {
+ .name = "omap24xx-eac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap2_eac_resources),
+ .resource = omap2_eac_resources,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+void omap_init_eac(struct eac_platform_data *pdata)
+{
+ omap2_eac_device.dev.platform_data = pdata;
+ platform_device_register(&omap2_eac_device);
+}
+
+#else
+void omap_init_eac(struct eac_platform_data *pdata) {}
+#endif
+
+#ifdef CONFIG_OMAP_SHA1_MD5
+static struct resource sha1_md5_resources[] = {
+ {
+ .start = OMAP24XX_SEC_SHA1MD5_BASE,
+ .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_SHA1MD5,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device sha1_md5_device = {
+ .name = "OMAP SHA1/MD5",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sha1_md5_resources),
+ .resource = sha1_md5_resources,
+};
+
+static void omap_init_sha1_md5(void)
+{
+ platform_device_register(&sha1_md5_device);
+}
+#else
+static inline void omap_init_sha1_md5(void) { }
+#endif
+
+#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#define OMAP_HDQ_BASE 0x480B2000
+#endif
+static struct resource omap_hdq_resources[] = {
+ {
+ .start = OMAP_HDQ_BASE,
+ .end = OMAP_HDQ_BASE + 0x1C,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_HDQ_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+static struct platform_device omap_hdq_dev = {
+ .name = "omap_hdq",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+ .num_resources = ARRAY_SIZE(omap_hdq_resources),
+ .resource = omap_hdq_resources,
+};
+static inline void omap_hdq_init(void)
+{
+ (void) platform_device_register(&omap_hdq_dev);
+}
+#else
+static inline void omap_hdq_init(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -208,10 +365,12 @@ static int __init omap2_init_devices(void)
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
- omap_init_i2c();
+ omap_init_camera();
omap_init_mbox();
omap_init_mcspi();
+ omap_hdq_init();
omap_init_sti();
+ omap_init_sha1_md5();
return 0;
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index ae83ed5..a8d34f6 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -23,7 +23,7 @@
#include <asm/mach-types.h>
#include <mach/gpmc.h>
-#include "memory.h"
+#include <mach/sdrc.h>
/* GPMC register offsets */
#define GPMC_REVISION 0x00
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index d67d331..faf3f68 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,8 +4,11 @@
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * Updated map desc to add 2430 support : <x0khasim@ti.com>
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Author:
+ * Juha Yrjola <juha.yrjola@nokia.com>
+ * Syed Khasim <x0khasim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -23,6 +26,11 @@
#include <mach/mux.h>
#include <mach/omapfb.h>
+#include <mach/sram.h>
+
+#include "memory.h"
+
+#include "clock.h"
#include <mach/powerdomain.h>
@@ -31,13 +39,6 @@
#include <mach/clockdomain.h>
#include "clockdomains.h"
-extern void omap_sram_init(void);
-extern int omap2_clk_init(void);
-extern void omap2_check_revision(void);
-extern void omap2_init_memory(void);
-extern void gpmc_init(void);
-extern void omapfb_reserve_sdram(void);
-
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3a3b2cb..a0bdf06 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -37,11 +37,9 @@ static struct omap_irq_bank {
} __attribute__ ((aligned(4))) irq_banks[] = {
{
/* MPU INTC */
- .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE),
+ .base_reg = 0,
.nr_irqs = 96,
- }, {
- /* XXX: DSP INTC */
- }
+ },
};
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
@@ -118,10 +116,8 @@ void __init omap_init_irq(void)
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
- /* XXX */
- if (!bank->base_reg)
- continue;
-
+ if (cpu_is_omap24xx())
+ bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE);
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index 9a280b5..bb3db80 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -14,6 +14,9 @@
* published by the Free Software Foundation.
*/
+#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
+#define ARCH_ARM_MACH_OMAP2_MEMORY_H
+
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
@@ -34,3 +37,7 @@ extern u32 omap2_memory_get_fast_dll_ctrl(void);
extern u32 omap2_memory_get_type(void);
u32 omap2_dll_force_needed(void);
u32 omap2_reprogram_sdrc(u32 level, u32 force);
+void __init omap2_init_memory(void);
+void __init gpmc_init(void);
+
+#endif
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index a716ecd..3ca15de 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -20,17 +20,17 @@
#include <asm/mach/map.h>
#include <mach/tc.h>
+#include <mach/control.h>
#include <mach/board.h>
#include <mach/mmc.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#include "../plat-omap/dsp/dsp_common.h"
-
static struct dsp_platform_data dsp_pdata = {
.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
};
@@ -76,7 +76,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
{
static DEFINE_MUTEX(dsp_pdata_lock);
- mutex_init(&kdev->lock);
+ spin_lock_init(&kdev->lock);
mutex_lock(&dsp_pdata_lock);
list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
@@ -525,10 +525,6 @@ static inline void omap_init_rng(void) {}
*/
static int __init omap_init_devices(void)
{
-/*
- * Need to enable relevant once for 2430 SDP
- */
-#ifndef CONFIG_MACH_OMAP_2430SDP
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
@@ -538,7 +534,6 @@ static int __init omap_init_devices(void)
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
-#endif
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index cf1dc02..10d449e 100644
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -30,10 +30,12 @@
#define __ASM_ARCH_OMAP_2430SDP_H
/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
+#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 149
#define SDP2430_CS0_BASE 0x04000000
-#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index d6f2a8e..731c858 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -31,6 +31,12 @@
extern void apollon_mmc_init(void);
+static inline int apollon_plus(void)
+{
+ /* The apollon plus has IDCODE revision 5 */
+ return system_rev & 0xc0;
+}
+
/* Placeholder for APOLLON specific defines */
#define APOLLON_ETHR_GPIO_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 1470cd3..7c3fa0f 100644
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,7 +1,7 @@
/*
* arch/arm/plat-omap/include/mach/board-h4.h
*
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
*
* Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
*
@@ -29,6 +29,9 @@
#ifndef __ASM_ARCH_OMAP_H4_H
#define __ASM_ARCH_OMAP_H4_H
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
/* Placeholder for H4 specific defines */
#define OMAP24XX_ETHR_GPIO_IRQ 92
#endif /* __ASM_ARCH_OMAP_H4_H */
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 5444564..c23c12c 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -45,6 +45,8 @@ struct omap_mmc_conf {
unsigned cover:1;
/* 4 wire signaling is optional, and is only used for SD/SDIO */
unsigned wire4:1;
+ /* use the internal clock */
+ unsigned internal_clock:1;
s16 power_pin;
s16 switch_pin;
s16 wp_pin;
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index ee378d2..dc98867 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,13 +1,10 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
/*
* arch/arm/plat-omap/include/mach/control.h
*
* OMAP2/3 System Control Module definitions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
*
@@ -16,14 +13,23 @@
* the Free Software Foundation.
*/
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
#include <mach/io.h>
+#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
/*
* As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
@@ -134,6 +140,7 @@
#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
/*
* REVISIT: This list of registers is not comprehensive - there are more
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 35a653c..98e9008 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio);
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 4258e00..3c7b425 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -25,6 +25,9 @@
#define GPMC_CS_NAND_ADDRESS 0x20
#define GPMC_CS_NAND_DATA 0x24
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index abb01e4..29c849f 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -282,8 +282,8 @@
#include "omap730.h"
#include "omap1510.h"
-#include "omap24xx.h"
#include "omap16xx.h"
+#include "omap24xx.h"
#include "omap34xx.h"
#ifndef __ASSEMBLER__
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 62aa7df..fe0b3d3 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -125,6 +125,7 @@
#define INT_UART2 (15 + IH2_BASE)
#define INT_BT_MCSI1TX (16 + IH2_BASE)
#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
#define INT_USB_W2FC (20 + IH2_BASE)
#define INT_1WIRE (21 + IH2_BASE)
#define INT_OS_TIMER (22 + IH2_BASE)
@@ -176,6 +177,7 @@
#define INT_1610_DMA_CH14 (61 + IH2_BASE)
#define INT_1610_DMA_CH15 (62 + IH2_BASE)
#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
* OMAP-730 specific IRQ numbers for interrupt handler 2
@@ -263,12 +265,16 @@
#define INT_24XX_GPTIMER10 46
#define INT_24XX_GPTIMER11 47
#define INT_24XX_GPTIMER12 48
+#define INT_24XX_SHA1MD5 51
#define INT_24XX_I2C1_IRQ 56
#define INT_24XX_I2C2_IRQ 57
+#define INT_24XX_HDQ_IRQ 58
#define INT_24XX_MCBSP1_IRQ_TX 59
#define INT_24XX_MCBSP1_IRQ_RX 60
#define INT_24XX_MCBSP2_IRQ_TX 62
#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_SPI1_IRQ 65
+#define INT_24XX_SPI2_IRQ 66
#define INT_24XX_UART1_IRQ 72
#define INT_24XX_UART2_IRQ 73
#define INT_24XX_UART3_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index 505a38a..d240046 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -44,5 +44,7 @@
#define OMAP1510_DSPREG_SIZE SZ_128K
#define OMAP1510_DSPREG_START 0xE1000000
+#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index c6c93af..0e69b50 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -44,6 +44,11 @@
#define OMAP16XX_DSPREG_SIZE SZ_128K
#define OMAP16XX_DSPREG_START 0xE1000000
+#define OMAP16XX_SEC_BASE 0xFFFE4000
+#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
+
/*
* ---------------------------------------------------------------------------
* Interrupts
@@ -190,7 +195,7 @@
#define WSPR_DISABLE_0 (0x0000aaaa)
#define WSPR_DISABLE_1 (0x00005555)
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
#endif /* __ASM_ARCH_OMAP16XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index cae037d..ec67fb4 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -62,6 +62,7 @@
#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
/* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@ struct lcd_ctrl {
int screen_width,
int pos_x, int pos_y, int width,
int height, int color_mode);
+ int (*set_rotate) (int angle);
int (*setup_mem) (int plane, size_t size,
int mem_type, unsigned long *paddr);
int (*mmap) (struct fb_info *info,
@@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
extern struct lcd_ctrl omap2_disp_ctrl;
#endif
+extern void omapfb_reserve_sdram(void);
extern void omapfb_register_panel(struct lcd_panel *panel);
extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
extern void omapfb_notify_clients(struct omapfb_device *fbdev,
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index d908eb5..25ee381 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,6 +25,8 @@
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
+#define SDRC_ACTIM_CTRL_A 0x09c
+#define SDRC_ACTIM_CTRL_B 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
2008-10-03 11:56 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree Tony Lindgren
@ 2008-10-03 11:56 ` Tony Lindgren
2008-10-09 14:37 ` Russell King - ARM Linux
2008-10-08 7:39 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v3 Tony Lindgren
1 sibling, 1 reply; 14+ messages in thread
From: Tony Lindgren @ 2008-10-03 11:56 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap, Paul Walmsley, Tony Lindgren
From: Paul Walmsley <paul@pwsan.com>
Fix sparse warnings in mach-omap2/irq.c. Fix by defining
intc_bank_write_reg() and intc_bank_read_reg(), and convert INTC module
register access to use them rather than __raw_{read,write}l.
Also clear up some checkpatch warnings involving includes from asm/
rather than linux/.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index a0bdf06..4759658 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,17 +13,22 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
-#include <asm/irq.h>
+#include <linux/io.h>
+
+/* selected INTC register offsets */
+
+#define INTC_REVISION 0x0000
+#define INTC_SYSCONFIG 0x0010
+#define INTC_SYSSTATUS 0x0014
+#define INTC_CONTROL 0x0048
+#define INTC_MIR_CLEAR0 0x0088
+#define INTC_MIR_SET0 0x008c
+#define INTC_PENDING_IRQ0 0x0098
-#define INTC_REVISION 0x0000
-#define INTC_SYSCONFIG 0x0010
-#define INTC_SYSSTATUS 0x0014
-#define INTC_CONTROL 0x0048
-#define INTC_MIR_CLEAR0 0x0088
-#define INTC_MIR_SET0 0x008c
+/* Number of IRQ state bits in each MIR register */
+#define IRQ_BITS_PER_REG 32
/*
* OMAP2 has a number of different interrupt controllers, each interrupt
@@ -42,36 +47,40 @@ static struct omap_irq_bank {
},
};
+/* INTC bank register get/set */
+
+static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
+{
+ __raw_writel(val, (__force void __iomem *)(bank->base_reg + reg));
+}
+
+static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
+{
+ return __raw_readl((__force void __iomem *)(bank->base_reg + reg));
+}
+
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
static void omap_ack_irq(unsigned int irq)
{
- __raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
+ intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
}
static void omap_mask_irq(unsigned int irq)
{
- int offset = (irq >> 5) << 5;
+ int offset = irq & (~(IRQ_BITS_PER_REG - 1));
- if (irq >= 64) {
- irq %= 64;
- } else if (irq >= 32) {
- irq %= 32;
- }
+ irq &= (IRQ_BITS_PER_REG - 1);
- __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
+ intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
}
static void omap_unmask_irq(unsigned int irq)
{
- int offset = (irq >> 5) << 5;
+ int offset = irq & (~(IRQ_BITS_PER_REG - 1));
- if (irq >= 64) {
- irq %= 64;
- } else if (irq >= 32) {
- irq %= 32;
- }
+ irq &= (IRQ_BITS_PER_REG - 1);
- __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
+ intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset);
}
static void omap_mask_ack_irq(unsigned int irq)
@@ -91,20 +100,20 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
{
unsigned long tmp;
- tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff;
+ tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
"(revision %ld.%ld) with %d interrupts\n",
bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
- tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG);
+ tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
tmp |= 1 << 1; /* soft reset */
- __raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
+ intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
- while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
+ while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
/* Wait for reset to complete */;
/* Enable autoidle */
- __raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG);
+ intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
}
void __init omap_init_irq(void)
@@ -117,7 +126,8 @@ void __init omap_init_irq(void)
struct omap_irq_bank *bank = irq_banks + i;
if (cpu_is_omap24xx())
- bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE);
+ bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 0/0] Refreshed omap2 patches, v3
2008-10-03 11:56 [PATCH 0/0] Refreshed omap2 patches, v3 Tony Lindgren
2008-10-03 11:56 ` [PATCH 01/07] ARM: OMAP2 Provide function to enable/disable uart clocks Tony Lindgren
@ 2008-10-03 12:13 ` Tony Lindgren
2008-10-08 7:42 ` git-pull request for omap2 changes (Re: [PATCH 0/0] Refreshed omap2 patches, v3) Tony Lindgren
2 siblings, 0 replies; 14+ messages in thread
From: Tony Lindgren @ 2008-10-03 12:13 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap
* Tony Lindgren <tony@atomide.com> [081003 14:54]:
> Hi all,
>
> Here are the refreshed omap2 patches that are still remaining
> from the earlier series [1] before the header move and other
> omap changes in Russell's devel branch.
>
> Some of the patches have been moved to Paul Walmsley's queue [2],
> and some to new omap3 queue, and some patches have been updated
> to merge in some new additions and fixes.
>
> I'll repost the omap3 queue shortly following these patches.
Forgot to mention that these patches are against RMK's devel branch
currently as they would not merge without conflicts against the
mainline tree currently.
> Regards,
>
> Tony
>
> [1] http://article.gmane.org/gmane.linux.ports.arm.omap/10390
> [2] http://thread.gmane.org/gmane.linux.ports.arm.omap/12320
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v3
2008-10-03 11:56 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree Tony Lindgren
2008-10-03 11:56 ` [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code Tony Lindgren
@ 2008-10-08 7:39 ` Tony Lindgren
2008-10-09 15:02 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v4 Tony Lindgren
1 sibling, 1 reply; 14+ messages in thread
From: Tony Lindgren @ 2008-10-08 7:39 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap
* Tony Lindgren <tony@atomide.com> [081003 14:56]:
> Misc updates from linux-omap tree, mostly to update common
> device initialization and add missing defines from linux-omap
> tree. Also some changes to make room for adding 34xx in
> following patches.
I'left out the CONFIG_VIDEO_OMAP2 changes from this patch to make it
more readable. Here's an updated version.
Tony
>From 1ad363b6893c1d7c8397188df5d1c8ddbca4e7d2 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 6 Oct 2008 15:49:36 +0300
Subject: [PATCH] ARM: OMAP2: Misc updates from linux-omap tree
Misc updates from linux-omap tree, mostly to update common
device initialization and add missing defines from linux-omap
tree. Also some changes to make room for adding 34xx in
following patches.
Note that the I2C resources are now set up in
arch/arm/plat-omap/i2c.c helper, and can be removed
from devices.c.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ab708d4..79cfe01 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_BASE 0xfffea000
#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
static struct resource sti_resources[] = {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ea55f28..1fb330e 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,7 @@
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
+int omap2_clk_init(void);
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7a7f025..a02a2c2 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -23,50 +23,7 @@
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
-
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define OMAP2_I2C_BASE2 0x48072000
-#define OMAP2_I2C_INT2 57
-
-static struct resource i2c_resources2[] = {
- {
- .start = OMAP2_I2C_BASE2,
- .end = OMAP2_I2C_BASE2 + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP2_I2C_INT2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device omap_i2c_device2 = {
- .name = "i2c_omap",
- .id = 2,
- .num_resources = ARRAY_SIZE(i2c_resources2),
- .resource = i2c_resources2,
-};
-
-/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
-static void omap_init_i2c(void)
-{
- /* REVISIT: Second I2C not in use on H4? */
- if (machine_is_omap_h4())
- return;
-
- if (!cpu_is_omap2430()) {
- omap_cfg_reg(J15_24XX_I2C2_SCL);
- omap_cfg_reg(H19_24XX_I2C2_SDA);
- }
- (void) platform_device_register(&omap_i2c_device2);
-}
-
-#else
-
-static void omap_init_i2c(void) {}
-
-#endif
+#include <mach/eac.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
#define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
@@ -104,7 +61,9 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP2_STI_BASE IO_ADDRESS(0x48068000)
+#if defined(CONFIG_ARCH_OMAP2)
+
+#define OMAP2_STI_BASE 0x48068000
#define OMAP2_STI_CHANNEL_BASE 0x54000000
#define OMAP2_STI_IRQ 4
@@ -124,6 +83,25 @@ static struct resource sti_resources[] = {
.flags = IORESOURCE_IRQ,
}
};
+#elif defined(CONFIG_ARCH_OMAP3)
+
+#define OMAP3_SDTI_BASE 0x54500000
+#define OMAP3_SDTI_CHANNEL_BASE 0x54600000
+
+static struct resource sti_resources[] = {
+ {
+ .start = OMAP3_SDTI_BASE,
+ .end = OMAP3_SDTI_BASE + 0xFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3_SDTI_CHANNEL_BASE,
+ .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+#endif
static struct platform_device sti_device = {
.name = "sti",
@@ -140,12 +118,14 @@ static inline void omap_init_sti(void)
static inline void omap_init_sti(void) {}
#endif
-#if defined(CONFIG_SPI_OMAP24XX)
+#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <mach/mcspi.h>
#define OMAP2_MCSPI1_BASE 0x48098000
#define OMAP2_MCSPI2_BASE 0x4809a000
+#define OMAP2_MCSPI3_BASE 0x480b8000
+#define OMAP2_MCSPI4_BASE 0x480ba000
static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
.num_cs = 4,
@@ -159,7 +139,7 @@ static struct resource omap2_mcspi1_resources[] = {
},
};
-struct platform_device omap2_mcspi1 = {
+static struct platform_device omap2_mcspi1 = {
.name = "omap2_mcspi",
.id = 1,
.num_resources = ARRAY_SIZE(omap2_mcspi1_resources),
@@ -181,7 +161,7 @@ static struct resource omap2_mcspi2_resources[] = {
},
};
-struct platform_device omap2_mcspi2 = {
+static struct platform_device omap2_mcspi2 = {
.name = "omap2_mcspi",
.id = 2,
.num_resources = ARRAY_SIZE(omap2_mcspi2_resources),
@@ -191,16 +171,162 @@ struct platform_device omap2_mcspi2 = {
},
};
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
+ .num_cs = 2,
+};
+
+static struct resource omap2_mcspi3_resources[] = {
+ {
+ .start = OMAP2_MCSPI3_BASE,
+ .end = OMAP2_MCSPI3_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi3 = {
+ .name = "omap2_mcspi",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(omap2_mcspi3_resources),
+ .resource = omap2_mcspi3_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi3_config,
+ },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
+ .num_cs = 1,
+};
+
+static struct resource omap2_mcspi4_resources[] = {
+ {
+ .start = OMAP2_MCSPI4_BASE,
+ .end = OMAP2_MCSPI4_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi4 = {
+ .name = "omap2_mcspi",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(omap2_mcspi4_resources),
+ .resource = omap2_mcspi4_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi4_config,
+ },
+};
+#endif
+
static void omap_init_mcspi(void)
{
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+ platform_device_register(&omap2_mcspi3);
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ platform_device_register(&omap2_mcspi4);
+#endif
}
#else
static inline void omap_init_mcspi(void) {}
#endif
+#ifdef CONFIG_SND_OMAP24XX_EAC
+
+#define OMAP2_EAC_BASE 0x48090000
+
+static struct resource omap2_eac_resources[] = {
+ {
+ .start = OMAP2_EAC_BASE,
+ .end = OMAP2_EAC_BASE + 0x109,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_eac_device = {
+ .name = "omap24xx-eac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap2_eac_resources),
+ .resource = omap2_eac_resources,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+void omap_init_eac(struct eac_platform_data *pdata)
+{
+ omap2_eac_device.dev.platform_data = pdata;
+ platform_device_register(&omap2_eac_device);
+}
+
+#else
+void omap_init_eac(struct eac_platform_data *pdata) {}
+#endif
+
+#ifdef CONFIG_OMAP_SHA1_MD5
+static struct resource sha1_md5_resources[] = {
+ {
+ .start = OMAP24XX_SEC_SHA1MD5_BASE,
+ .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_SHA1MD5,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device sha1_md5_device = {
+ .name = "OMAP SHA1/MD5",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sha1_md5_resources),
+ .resource = sha1_md5_resources,
+};
+
+static void omap_init_sha1_md5(void)
+{
+ platform_device_register(&sha1_md5_device);
+}
+#else
+static inline void omap_init_sha1_md5(void) { }
+#endif
+
+#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#define OMAP_HDQ_BASE 0x480B2000
+#endif
+static struct resource omap_hdq_resources[] = {
+ {
+ .start = OMAP_HDQ_BASE,
+ .end = OMAP_HDQ_BASE + 0x1C,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_HDQ_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+static struct platform_device omap_hdq_dev = {
+ .name = "omap_hdq",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+ .num_resources = ARRAY_SIZE(omap_hdq_resources),
+ .resource = omap_hdq_resources,
+};
+static inline void omap_hdq_init(void)
+{
+ (void) platform_device_register(&omap_hdq_dev);
+}
+#else
+static inline void omap_hdq_init(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -208,10 +334,12 @@ static int __init omap2_init_devices(void)
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
- omap_init_i2c();
+ omap_init_camera();
omap_init_mbox();
omap_init_mcspi();
+ omap_hdq_init();
omap_init_sti();
+ omap_init_sha1_md5();
return 0;
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index be6a753..149bfba 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -23,7 +23,7 @@
#include <asm/mach-types.h>
#include <mach/gpmc.h>
-#include "memory.h"
+#include <mach/sdrc.h>
/* GPMC register offsets */
#define GPMC_REVISION 0x00
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 371e540..03c6ab1 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,8 +4,11 @@
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrj?l? <juha.yrjola@nokia.com>
- * Updated map desc to add 2430 support : <x0khasim@ti.com>
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Author:
+ * Juha Yrjola <juha.yrjola@nokia.com>
+ * Syed Khasim <x0khasim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -23,6 +26,11 @@
#include <mach/mux.h>
#include <mach/omapfb.h>
+#include <mach/sram.h>
+
+#include "memory.h"
+
+#include "clock.h"
#include <mach/powerdomain.h>
@@ -31,13 +39,6 @@
#include <mach/clockdomain.h>
#include "clockdomains.h"
-extern void omap_sram_init(void);
-extern int omap2_clk_init(void);
-extern void omap2_check_revision(void);
-extern void omap2_init_memory(void);
-extern void gpmc_init(void);
-extern void omapfb_reserve_sdram(void);
-
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 742bd00..a5c748a 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -37,11 +37,9 @@ static struct omap_irq_bank {
} __attribute__ ((aligned(4))) irq_banks[] = {
{
/* MPU INTC */
- .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE),
+ .base_reg = 0,
.nr_irqs = 96,
- }, {
- /* XXX: DSP INTC */
- }
+ },
};
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
@@ -118,10 +116,8 @@ void __init omap_init_irq(void)
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
- /* XXX */
- if (!bank->base_reg)
- continue;
-
+ if (cpu_is_omap24xx())
+ bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE);
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index 9a280b5..bb3db80 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -14,6 +14,9 @@
* published by the Free Software Foundation.
*/
+#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
+#define ARCH_ARM_MACH_OMAP2_MEMORY_H
+
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
@@ -34,3 +37,7 @@ extern u32 omap2_memory_get_fast_dll_ctrl(void);
extern u32 omap2_memory_get_type(void);
u32 omap2_dll_force_needed(void);
u32 omap2_reprogram_sdrc(u32 level, u32 force);
+void __init omap2_init_memory(void);
+void __init gpmc_init(void);
+
+#endif
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 187e3d8..1c1d831 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -20,16 +20,16 @@
#include <asm/mach/map.h>
#include <mach/tc.h>
+#include <mach/control.h>
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#include "../plat-omap/dsp/dsp_common.h"
-
static struct dsp_platform_data dsp_pdata = {
.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
};
@@ -75,7 +75,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
{
static DEFINE_MUTEX(dsp_pdata_lock);
- mutex_init(&kdev->lock);
+ spin_lock_init(&kdev->lock);
mutex_lock(&dsp_pdata_lock);
list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
@@ -479,10 +479,6 @@ static inline void omap_init_rng(void) {}
*/
static int __init omap_init_devices(void)
{
-/*
- * Need to enable relevant once for 2430 SDP
- */
-#ifndef CONFIG_MACH_OMAP_2430SDP
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
@@ -492,7 +488,6 @@ static int __init omap_init_devices(void)
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
-#endif
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index cf1dc02..10d449e 100644
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -30,10 +30,12 @@
#define __ASM_ARCH_OMAP_2430SDP_H
/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
+#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 149
#define SDP2430_CS0_BASE 0x04000000
-#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index d6f2a8e..731c858 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -31,6 +31,12 @@
extern void apollon_mmc_init(void);
+static inline int apollon_plus(void)
+{
+ /* The apollon plus has IDCODE revision 5 */
+ return system_rev & 0xc0;
+}
+
/* Placeholder for APOLLON specific defines */
#define APOLLON_ETHR_GPIO_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 1470cd3..7c3fa0f 100644
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,7 +1,7 @@
/*
* arch/arm/plat-omap/include/mach/board-h4.h
*
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
*
* Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
*
@@ -29,6 +29,9 @@
#ifndef __ASM_ARCH_OMAP_H4_H
#define __ASM_ARCH_OMAP_H4_H
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
/* Placeholder for H4 specific defines */
#define OMAP24XX_ETHR_GPIO_IRQ 92
#endif /* __ASM_ARCH_OMAP_H4_H */
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 5444564..c23c12c 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -45,6 +45,8 @@ struct omap_mmc_conf {
unsigned cover:1;
/* 4 wire signaling is optional, and is only used for SD/SDIO */
unsigned wire4:1;
+ /* use the internal clock */
+ unsigned internal_clock:1;
s16 power_pin;
s16 switch_pin;
s16 wp_pin;
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index ee378d2..dc98867 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,13 +1,10 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
/*
* arch/arm/plat-omap/include/mach/control.h
*
* OMAP2/3 System Control Module definitions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
*
@@ -16,14 +13,23 @@
* the Free Software Foundation.
*/
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
#include <mach/io.h>
+#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
/*
* As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
@@ -134,6 +140,7 @@
#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
/*
* REVISIT: This list of registers is not comprehensive - there are more
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 4cb818d..5bb7460 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio);
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 4258e00..3c7b425 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -25,6 +25,9 @@
#define GPMC_CS_NAND_ADDRESS 0x20
#define GPMC_CS_NAND_DATA 0x24
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index abb01e4..29c849f 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -282,8 +282,8 @@
#include "omap730.h"
#include "omap1510.h"
-#include "omap24xx.h"
#include "omap16xx.h"
+#include "omap24xx.h"
#include "omap34xx.h"
#ifndef __ASSEMBLER__
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 17248bb..e9fd630 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -125,6 +125,7 @@
#define INT_UART2 (15 + IH2_BASE)
#define INT_BT_MCSI1TX (16 + IH2_BASE)
#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
#define INT_USB_W2FC (20 + IH2_BASE)
#define INT_1WIRE (21 + IH2_BASE)
#define INT_OS_TIMER (22 + IH2_BASE)
@@ -176,6 +177,7 @@
#define INT_1610_DMA_CH14 (61 + IH2_BASE)
#define INT_1610_DMA_CH15 (62 + IH2_BASE)
#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
* OMAP-730 specific IRQ numbers for interrupt handler 2
@@ -263,12 +265,16 @@
#define INT_24XX_GPTIMER10 46
#define INT_24XX_GPTIMER11 47
i #define INT_24XX_GPTIMER12 48
+#define INT_24XX_SHA1MD5 51
#define INT_24XX_I2C1_IRQ 56
#define INT_24XX_I2C2_IRQ 57
+#define INT_24XX_HDQ_IRQ 58
#define INT_24XX_MCBSP1_IRQ_TX 59
#define INT_24XX_MCBSP1_IRQ_RX 60
#define INT_24XX_MCBSP2_IRQ_TX 62
#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_SPI1_IRQ 65
+#define INT_24XX_SPI2_IRQ 66
#define INT_24XX_UART1_IRQ 72
#define INT_24XX_UART2_IRQ 73
#define INT_24XX_UART3_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index 505a38a..d240046 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -44,5 +44,7 @@
#define OMAP1510_DSPREG_SIZE SZ_128K
#define OMAP1510_DSPREG_START 0xE1000000
+#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index c6c93af..0e69b50 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -44,6 +44,11 @@
#define OMAP16XX_DSPREG_SIZE SZ_128K
#define OMAP16XX_DSPREG_START 0xE1000000
+#define OMAP16XX_SEC_BASE 0xFFFE4000
+#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
+
/*
* ---------------------------------------------------------------------------
* Interrupts
@@ -190,7 +195,7 @@
#define WSPR_DISABLE_0 (0x0000aaaa)
#define WSPR_DISABLE_1 (0x00005555)
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
#endif /* __ASM_ARCH_OMAP16XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index cae037d..ec67fb4 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -62,6 +62,7 @@
#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
/* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@ struct lcd_ctrl {
int screen_width,
int pos_x, int pos_y, int width,
int height, int color_mode);
+ int (*set_rotate) (int angle);
int (*setup_mem) (int plane, size_t size,
int mem_type, unsigned long *paddr);
int (*mmap) (struct fb_info *info,
@@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
extern struct lcd_ctrl omap2_disp_ctrl;
#endif
+extern void omapfb_reserve_sdram(void);
extern void omapfb_register_panel(struct lcd_panel *panel);
extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
extern void omapfb_notify_clients(struct omapfb_device *fbdev,
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index d908eb5..25ee381 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,6 +25,8 @@
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
+#define SDRC_ACTIM_CTRL_A 0x09c
+#define SDRC_ACTIM_CTRL_B 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
^ permalink raw reply related [flat|nested] 14+ messages in thread
* git-pull request for omap2 changes (Re: [PATCH 0/0] Refreshed omap2 patches, v3)
2008-10-03 11:56 [PATCH 0/0] Refreshed omap2 patches, v3 Tony Lindgren
2008-10-03 11:56 ` [PATCH 01/07] ARM: OMAP2 Provide function to enable/disable uart clocks Tony Lindgren
2008-10-03 12:13 ` [PATCH 0/0] Refreshed omap2 patches, v3 Tony Lindgren
@ 2008-10-08 7:42 ` Tony Lindgren
2 siblings, 0 replies; 14+ messages in thread
From: Tony Lindgren @ 2008-10-08 7:42 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap
* Tony Lindgren <tony@atomide.com> [081003 14:54]:
> Hi all,
>
> Here are the refreshed omap2 patches that are still remaining
> from the earlier series [1] before the header move and other
> omap changes in Russell's devel branch.
>
> Some of the patches have been moved to Paul Walmsley's queue [2],
> and some to new omap3 queue, and some patches have been updated
> to merge in some new additions and fixes.
>
> I'll repost the omap3 queue shortly following these patches.
>
> Regards,
>
> Tony
>
> [1] http://article.gmane.org/gmane.linux.ports.arm.omap/10390
> [2] http://thread.gmane.org/gmane.linux.ports.arm.omap/12320
Here's the pull request for this series:
The following changes since commit 56f68556d7bbb51dd158c74deb09c783345bfbbd:
Russell King (1):
Merge unstable branch 'omap-rmk'
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap2-upstream
Jouni Hogander (1):
ARM: OMAP2 Provide function to enable/disable uart clocks
Paul Walmsley (2):
ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremap
ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
Tony Lindgren (3):
ARM: OMAP2: Move sleep.S into sleep24xx.S
ARM: OMAP2: Use omap_globals for CPU detection for multi-omap
ARM: OMAP2: Misc updates from linux-omap tree
Vikram Pandita (1):
ARM: OMAP2: Add pinmux support for omap34xx
arch/arm/mach-omap1/devices.c | 2 +-
arch/arm/mach-omap2/Makefile | 5 +-
arch/arm/mach-omap2/clock.h | 1 +
arch/arm/mach-omap2/devices.c | 226 ++++++++++++++++++-----
arch/arm/mach-omap2/gpmc.c | 81 ++++++---
arch/arm/mach-omap2/id.c | 39 +++--
arch/arm/mach-omap2/io.c | 19 +-
arch/arm/mach-omap2/irq.c | 77 +++++----
arch/arm/mach-omap2/memory.h | 7 +
arch/arm/mach-omap2/mux.c | 202 +++++++++++++++++++-
arch/arm/mach-omap2/serial.c | 100 ++++------
arch/arm/mach-omap2/{sleep.S => sleep24xx.S} | 32 ++--
arch/arm/plat-omap/common.c | 4 +
arch/arm/plat-omap/devices.c | 11 +-
arch/arm/plat-omap/include/mach/board-2430sdp.h | 6 +-
arch/arm/plat-omap/include/mach/board-apollon.h | 6 +
arch/arm/plat-omap/include/mach/board-h4.h | 5 +-
arch/arm/plat-omap/include/mach/board.h | 2 +
arch/arm/plat-omap/include/mach/common.h | 3 +
arch/arm/plat-omap/include/mach/control.h | 17 ++-
arch/arm/plat-omap/include/mach/cpu.h | 5 +
arch/arm/plat-omap/include/mach/gpio.h | 2 +
arch/arm/plat-omap/include/mach/gpmc.h | 8 +
arch/arm/plat-omap/include/mach/hardware.h | 2 +-
arch/arm/plat-omap/include/mach/irqs.h | 6 +
arch/arm/plat-omap/include/mach/mux.h | 156 +++++++++++++++-
arch/arm/plat-omap/include/mach/omap1510.h | 2 +
arch/arm/plat-omap/include/mach/omap16xx.h | 7 +-
arch/arm/plat-omap/include/mach/omap24xx.h | 1 +
arch/arm/plat-omap/include/mach/omapfb.h | 3 +
arch/arm/plat-omap/include/mach/pm.h | 3 +-
arch/arm/plat-omap/include/mach/sdrc.h | 2 +
arch/arm/plat-omap/include/mach/serial.h | 6 +
33 files changed, 799 insertions(+), 249 deletions(-)
rename arch/arm/mach-omap2/{sleep.S => sleep24xx.S} (85%)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
2008-10-03 11:56 ` [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code Tony Lindgren
@ 2008-10-09 14:37 ` Russell King - ARM Linux
2008-10-09 15:04 ` Tony Lindgren
0 siblings, 1 reply; 14+ messages in thread
From: Russell King - ARM Linux @ 2008-10-09 14:37 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-arm-kernel, linux-omap, Paul Walmsley
On Fri, Oct 03, 2008 at 02:56:49PM +0300, Tony Lindgren wrote:
> Fix sparse warnings in mach-omap2/irq.c. Fix by defining
> intc_bank_write_reg() and intc_bank_read_reg(), and convert INTC module
> register access to use them rather than __raw_{read,write}l.
This is not a fix.
> +/* INTC bank register get/set */
> +
> +static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
> +{
> + __raw_writel(val, (__force void __iomem *)(bank->base_reg + reg));
> +}
> +
> +static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
> +{
> + return __raw_readl((__force void __iomem *)(bank->base_reg + reg));
Because it uses __force here. In my tree, bank->base_reg is defined
to be:
void __iomem *base_reg;
So these cases are entirely unnecessary. As I've said before, use of
__force is generally a sure sign of doing something wrong.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v4
2008-10-08 7:39 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v3 Tony Lindgren
@ 2008-10-09 15:02 ` Tony Lindgren
0 siblings, 0 replies; 14+ messages in thread
From: Tony Lindgren @ 2008-10-09 15:02 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: linux-omap
[-- Attachment #1: Type: text/plain, Size: 605 bytes --]
* Tony Lindgren <tony@atomide.com> [081008 10:37]:
> * Tony Lindgren <tony@atomide.com> [081003 14:56]:
> > Misc updates from linux-omap tree, mostly to update common
> > device initialization and add missing defines from linux-omap
> > tree. Also some changes to make room for adding 34xx in
> > following patches.
>
> I'left out the CONFIG_VIDEO_OMAP2 changes from this patch to make it
> more readable. Here's an updated version.
And of course I forgot to remove the call to related init function
breaking compile.. One more time below. Also updates in the
omap2-upstream tree for you to pull.
Tony
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: omap2-misc.patch --]
[-- Type: text/x-diff; charset=utf-8, Size: 23314 bytes --]
>From 646e3ed1a349fbccce651fed2d3987f0e7b0f0f4 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 6 Oct 2008 15:49:36 +0300
Subject: [PATCH] ARM: OMAP2: Misc updates from linux-omap tree
Misc updates from linux-omap tree, mostly to update common
device initialization and add missing defines from linux-omap
tree. Also some changes to make room for adding 34xx in
following patches.
Note that the I2C resources are now set up in
arch/arm/plat-omap/i2c.c helper, and can be removed
from devices.c.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ab708d4..79cfe01 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_BASE 0xfffea000
#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
static struct resource sti_resources[] = {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ea55f28..1fb330e 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,7 @@
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
+int omap2_clk_init(void);
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7a7f025..7cca33e 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -23,50 +23,7 @@
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
-
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define OMAP2_I2C_BASE2 0x48072000
-#define OMAP2_I2C_INT2 57
-
-static struct resource i2c_resources2[] = {
- {
- .start = OMAP2_I2C_BASE2,
- .end = OMAP2_I2C_BASE2 + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP2_I2C_INT2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device omap_i2c_device2 = {
- .name = "i2c_omap",
- .id = 2,
- .num_resources = ARRAY_SIZE(i2c_resources2),
- .resource = i2c_resources2,
-};
-
-/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
-static void omap_init_i2c(void)
-{
- /* REVISIT: Second I2C not in use on H4? */
- if (machine_is_omap_h4())
- return;
-
- if (!cpu_is_omap2430()) {
- omap_cfg_reg(J15_24XX_I2C2_SCL);
- omap_cfg_reg(H19_24XX_I2C2_SDA);
- }
- (void) platform_device_register(&omap_i2c_device2);
-}
-
-#else
-
-static void omap_init_i2c(void) {}
-
-#endif
+#include <mach/eac.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
#define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
@@ -104,7 +61,9 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP2_STI_BASE IO_ADDRESS(0x48068000)
+#if defined(CONFIG_ARCH_OMAP2)
+
+#define OMAP2_STI_BASE 0x48068000
#define OMAP2_STI_CHANNEL_BASE 0x54000000
#define OMAP2_STI_IRQ 4
@@ -124,6 +83,25 @@ static struct resource sti_resources[] = {
.flags = IORESOURCE_IRQ,
}
};
+#elif defined(CONFIG_ARCH_OMAP3)
+
+#define OMAP3_SDTI_BASE 0x54500000
+#define OMAP3_SDTI_CHANNEL_BASE 0x54600000
+
+static struct resource sti_resources[] = {
+ {
+ .start = OMAP3_SDTI_BASE,
+ .end = OMAP3_SDTI_BASE + 0xFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3_SDTI_CHANNEL_BASE,
+ .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+#endif
static struct platform_device sti_device = {
.name = "sti",
@@ -140,12 +118,14 @@ static inline void omap_init_sti(void)
static inline void omap_init_sti(void) {}
#endif
-#if defined(CONFIG_SPI_OMAP24XX)
+#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <mach/mcspi.h>
#define OMAP2_MCSPI1_BASE 0x48098000
#define OMAP2_MCSPI2_BASE 0x4809a000
+#define OMAP2_MCSPI3_BASE 0x480b8000
+#define OMAP2_MCSPI4_BASE 0x480ba000
static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
.num_cs = 4,
@@ -159,7 +139,7 @@ static struct resource omap2_mcspi1_resources[] = {
},
};
-struct platform_device omap2_mcspi1 = {
+static struct platform_device omap2_mcspi1 = {
.name = "omap2_mcspi",
.id = 1,
.num_resources = ARRAY_SIZE(omap2_mcspi1_resources),
@@ -181,7 +161,7 @@ static struct resource omap2_mcspi2_resources[] = {
},
};
-struct platform_device omap2_mcspi2 = {
+static struct platform_device omap2_mcspi2 = {
.name = "omap2_mcspi",
.id = 2,
.num_resources = ARRAY_SIZE(omap2_mcspi2_resources),
@@ -191,16 +171,162 @@ struct platform_device omap2_mcspi2 = {
},
};
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
+ .num_cs = 2,
+};
+
+static struct resource omap2_mcspi3_resources[] = {
+ {
+ .start = OMAP2_MCSPI3_BASE,
+ .end = OMAP2_MCSPI3_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi3 = {
+ .name = "omap2_mcspi",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(omap2_mcspi3_resources),
+ .resource = omap2_mcspi3_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi3_config,
+ },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
+ .num_cs = 1,
+};
+
+static struct resource omap2_mcspi4_resources[] = {
+ {
+ .start = OMAP2_MCSPI4_BASE,
+ .end = OMAP2_MCSPI4_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi4 = {
+ .name = "omap2_mcspi",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(omap2_mcspi4_resources),
+ .resource = omap2_mcspi4_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi4_config,
+ },
+};
+#endif
+
static void omap_init_mcspi(void)
{
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+ platform_device_register(&omap2_mcspi3);
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ platform_device_register(&omap2_mcspi4);
+#endif
}
#else
static inline void omap_init_mcspi(void) {}
#endif
+#ifdef CONFIG_SND_OMAP24XX_EAC
+
+#define OMAP2_EAC_BASE 0x48090000
+
+static struct resource omap2_eac_resources[] = {
+ {
+ .start = OMAP2_EAC_BASE,
+ .end = OMAP2_EAC_BASE + 0x109,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_eac_device = {
+ .name = "omap24xx-eac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap2_eac_resources),
+ .resource = omap2_eac_resources,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+void omap_init_eac(struct eac_platform_data *pdata)
+{
+ omap2_eac_device.dev.platform_data = pdata;
+ platform_device_register(&omap2_eac_device);
+}
+
+#else
+void omap_init_eac(struct eac_platform_data *pdata) {}
+#endif
+
+#ifdef CONFIG_OMAP_SHA1_MD5
+static struct resource sha1_md5_resources[] = {
+ {
+ .start = OMAP24XX_SEC_SHA1MD5_BASE,
+ .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_SHA1MD5,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device sha1_md5_device = {
+ .name = "OMAP SHA1/MD5",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sha1_md5_resources),
+ .resource = sha1_md5_resources,
+};
+
+static void omap_init_sha1_md5(void)
+{
+ platform_device_register(&sha1_md5_device);
+}
+#else
+static inline void omap_init_sha1_md5(void) { }
+#endif
+
+#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#define OMAP_HDQ_BASE 0x480B2000
+#endif
+static struct resource omap_hdq_resources[] = {
+ {
+ .start = OMAP_HDQ_BASE,
+ .end = OMAP_HDQ_BASE + 0x1C,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_HDQ_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+static struct platform_device omap_hdq_dev = {
+ .name = "omap_hdq",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+ .num_resources = ARRAY_SIZE(omap_hdq_resources),
+ .resource = omap_hdq_resources,
+};
+static inline void omap_hdq_init(void)
+{
+ (void) platform_device_register(&omap_hdq_dev);
+}
+#else
+static inline void omap_hdq_init(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -208,10 +334,11 @@ static int __init omap2_init_devices(void)
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
- omap_init_i2c();
omap_init_mbox();
omap_init_mcspi();
+ omap_hdq_init();
omap_init_sti();
+ omap_init_sha1_md5();
return 0;
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index be6a753..149bfba 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -23,7 +23,7 @@
#include <asm/mach-types.h>
#include <mach/gpmc.h>
-#include "memory.h"
+#include <mach/sdrc.h>
/* GPMC register offsets */
#define GPMC_REVISION 0x00
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 371e540..03c6ab1 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,8 +4,11 @@
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * Updated map desc to add 2430 support : <x0khasim@ti.com>
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Author:
+ * Juha Yrjola <juha.yrjola@nokia.com>
+ * Syed Khasim <x0khasim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -23,6 +26,11 @@
#include <mach/mux.h>
#include <mach/omapfb.h>
+#include <mach/sram.h>
+
+#include "memory.h"
+
+#include "clock.h"
#include <mach/powerdomain.h>
@@ -31,13 +39,6 @@
#include <mach/clockdomain.h>
#include "clockdomains.h"
-extern void omap_sram_init(void);
-extern int omap2_clk_init(void);
-extern void omap2_check_revision(void);
-extern void omap2_init_memory(void);
-extern void gpmc_init(void);
-extern void omapfb_reserve_sdram(void);
-
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 742bd00..a5c748a 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -37,11 +37,9 @@ static struct omap_irq_bank {
} __attribute__ ((aligned(4))) irq_banks[] = {
{
/* MPU INTC */
- .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE),
+ .base_reg = 0,
.nr_irqs = 96,
- }, {
- /* XXX: DSP INTC */
- }
+ },
};
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
@@ -118,10 +116,8 @@ void __init omap_init_irq(void)
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
- /* XXX */
- if (!bank->base_reg)
- continue;
-
+ if (cpu_is_omap24xx())
+ bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE);
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index 9a280b5..bb3db80 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -14,6 +14,9 @@
* published by the Free Software Foundation.
*/
+#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
+#define ARCH_ARM_MACH_OMAP2_MEMORY_H
+
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
@@ -34,3 +37,7 @@ extern u32 omap2_memory_get_fast_dll_ctrl(void);
extern u32 omap2_memory_get_type(void);
u32 omap2_dll_force_needed(void);
u32 omap2_reprogram_sdrc(u32 level, u32 force);
+void __init omap2_init_memory(void);
+void __init gpmc_init(void);
+
+#endif
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 187e3d8..1c1d831 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -20,16 +20,16 @@
#include <asm/mach/map.h>
#include <mach/tc.h>
+#include <mach/control.h>
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#include "../plat-omap/dsp/dsp_common.h"
-
static struct dsp_platform_data dsp_pdata = {
.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
};
@@ -75,7 +75,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
{
static DEFINE_MUTEX(dsp_pdata_lock);
- mutex_init(&kdev->lock);
+ spin_lock_init(&kdev->lock);
mutex_lock(&dsp_pdata_lock);
list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
@@ -479,10 +479,6 @@ static inline void omap_init_rng(void) {}
*/
static int __init omap_init_devices(void)
{
-/*
- * Need to enable relevant once for 2430 SDP
- */
-#ifndef CONFIG_MACH_OMAP_2430SDP
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
@@ -492,7 +488,6 @@ static int __init omap_init_devices(void)
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
-#endif
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index cf1dc02..10d449e 100644
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -30,10 +30,12 @@
#define __ASM_ARCH_OMAP_2430SDP_H
/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
+#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 149
#define SDP2430_CS0_BASE 0x04000000
-#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index d6f2a8e..731c858 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -31,6 +31,12 @@
extern void apollon_mmc_init(void);
+static inline int apollon_plus(void)
+{
+ /* The apollon plus has IDCODE revision 5 */
+ return system_rev & 0xc0;
+}
+
/* Placeholder for APOLLON specific defines */
#define APOLLON_ETHR_GPIO_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 1470cd3..7c3fa0f 100644
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,7 +1,7 @@
/*
* arch/arm/plat-omap/include/mach/board-h4.h
*
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
*
* Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
*
@@ -29,6 +29,9 @@
#ifndef __ASM_ARCH_OMAP_H4_H
#define __ASM_ARCH_OMAP_H4_H
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
/* Placeholder for H4 specific defines */
#define OMAP24XX_ETHR_GPIO_IRQ 92
#endif /* __ASM_ARCH_OMAP_H4_H */
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 5444564..c23c12c 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -45,6 +45,8 @@ struct omap_mmc_conf {
unsigned cover:1;
/* 4 wire signaling is optional, and is only used for SD/SDIO */
unsigned wire4:1;
+ /* use the internal clock */
+ unsigned internal_clock:1;
s16 power_pin;
s16 switch_pin;
s16 wp_pin;
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index ee378d2..dc98867 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,13 +1,10 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
/*
* arch/arm/plat-omap/include/mach/control.h
*
* OMAP2/3 System Control Module definitions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
*
@@ -16,14 +13,23 @@
* the Free Software Foundation.
*/
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
#include <mach/io.h>
+#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
/*
* As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
@@ -134,6 +140,7 @@
#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
/*
* REVISIT: This list of registers is not comprehensive - there are more
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 4cb818d..5bb7460 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio);
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 4258e00..3c7b425 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -25,6 +25,9 @@
#define GPMC_CS_NAND_ADDRESS 0x20
#define GPMC_CS_NAND_DATA 0x24
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index abb01e4..29c849f 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -282,8 +282,8 @@
#include "omap730.h"
#include "omap1510.h"
-#include "omap24xx.h"
#include "omap16xx.h"
+#include "omap24xx.h"
#include "omap34xx.h"
#ifndef __ASSEMBLER__
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 17248bb..e9fd630 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -125,6 +125,7 @@
#define INT_UART2 (15 + IH2_BASE)
#define INT_BT_MCSI1TX (16 + IH2_BASE)
#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
#define INT_USB_W2FC (20 + IH2_BASE)
#define INT_1WIRE (21 + IH2_BASE)
#define INT_OS_TIMER (22 + IH2_BASE)
@@ -176,6 +177,7 @@
#define INT_1610_DMA_CH14 (61 + IH2_BASE)
#define INT_1610_DMA_CH15 (62 + IH2_BASE)
#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
* OMAP-730 specific IRQ numbers for interrupt handler 2
@@ -263,12 +265,16 @@
#define INT_24XX_GPTIMER10 46
#define INT_24XX_GPTIMER11 47
#define INT_24XX_GPTIMER12 48
+#define INT_24XX_SHA1MD5 51
#define INT_24XX_I2C1_IRQ 56
#define INT_24XX_I2C2_IRQ 57
+#define INT_24XX_HDQ_IRQ 58
#define INT_24XX_MCBSP1_IRQ_TX 59
#define INT_24XX_MCBSP1_IRQ_RX 60
#define INT_24XX_MCBSP2_IRQ_TX 62
#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_SPI1_IRQ 65
+#define INT_24XX_SPI2_IRQ 66
#define INT_24XX_UART1_IRQ 72
#define INT_24XX_UART2_IRQ 73
#define INT_24XX_UART3_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index 505a38a..d240046 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -44,5 +44,7 @@
#define OMAP1510_DSPREG_SIZE SZ_128K
#define OMAP1510_DSPREG_START 0xE1000000
+#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index c6c93af..0e69b50 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -44,6 +44,11 @@
#define OMAP16XX_DSPREG_SIZE SZ_128K
#define OMAP16XX_DSPREG_START 0xE1000000
+#define OMAP16XX_SEC_BASE 0xFFFE4000
+#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
+
/*
* ---------------------------------------------------------------------------
* Interrupts
@@ -190,7 +195,7 @@
#define WSPR_DISABLE_0 (0x0000aaaa)
#define WSPR_DISABLE_1 (0x00005555)
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
#endif /* __ASM_ARCH_OMAP16XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index cae037d..ec67fb4 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -62,6 +62,7 @@
#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
/* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@ struct lcd_ctrl {
int screen_width,
int pos_x, int pos_y, int width,
int height, int color_mode);
+ int (*set_rotate) (int angle);
int (*setup_mem) (int plane, size_t size,
int mem_type, unsigned long *paddr);
int (*mmap) (struct fb_info *info,
@@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
extern struct lcd_ctrl omap2_disp_ctrl;
#endif
+extern void omapfb_reserve_sdram(void);
extern void omapfb_register_panel(struct lcd_panel *panel);
extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
extern void omapfb_notify_clients(struct omapfb_device *fbdev,
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index d908eb5..25ee381 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,6 +25,8 @@
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
+#define SDRC_ACTIM_CTRL_A 0x09c
+#define SDRC_ACTIM_CTRL_B 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
2008-10-09 14:37 ` Russell King - ARM Linux
@ 2008-10-09 15:04 ` Tony Lindgren
0 siblings, 0 replies; 14+ messages in thread
From: Tony Lindgren @ 2008-10-09 15:04 UTC (permalink / raw)
To: Russell King - ARM Linux; +Cc: linux-arm-kernel, linux-omap, Paul Walmsley
[-- Attachment #1: Type: text/plain, Size: 1117 bytes --]
* Russell King - ARM Linux <linux@arm.linux.org.uk> [081009 17:38]:
> On Fri, Oct 03, 2008 at 02:56:49PM +0300, Tony Lindgren wrote:
> > Fix sparse warnings in mach-omap2/irq.c. Fix by defining
> > intc_bank_write_reg() and intc_bank_read_reg(), and convert INTC module
> > register access to use them rather than __raw_{read,write}l.
>
> This is not a fix.
> > +/* INTC bank register get/set */
> > +
> > +static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
> > +{
> > + __raw_writel(val, (__force void __iomem *)(bank->base_reg + reg));
> > +}
> > +
> > +static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
> > +{
> > + return __raw_readl((__force void __iomem *)(bank->base_reg + reg));
>
> Because it uses __force here. In my tree, bank->base_reg is defined
> to be:
>
> void __iomem *base_reg;
>
> So these cases are entirely unnecessary. As I've said before, use of
> __force is generally a sure sign of doing something wrong.
Oops, sorry I missed that one. Here's the refreshed version.
Also updated int the omap2-upstream branch for you to pull.
Tony
[-- Attachment #2: omap2-sparse.patch --]
[-- Type: text/x-diff, Size: 4296 bytes --]
>From 2e7509e5b3acc4b8653faa1966e5ac234d36ac82 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 9 Oct 2008 17:51:28 +0300
Subject: [PATCH] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
Fix sparse warnings in mach-omap2/irq.c. Fix by defining
intc_bank_write_reg() and intc_bank_read_reg(), and convert INTC module
register access to use them rather than __raw_{read,write}l.
Also clear up some checkpatch warnings involving includes from asm/
rather than linux/.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index a5c748a..c39e26d 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,17 +13,23 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#define INTC_REVISION 0x0000
-#define INTC_SYSCONFIG 0x0010
-#define INTC_SYSSTATUS 0x0014
-#define INTC_CONTROL 0x0048
-#define INTC_MIR_CLEAR0 0x0088
-#define INTC_MIR_SET0 0x008c
+
+/* selected INTC register offsets */
+
+#define INTC_REVISION 0x0000
+#define INTC_SYSCONFIG 0x0010
+#define INTC_SYSSTATUS 0x0014
+#define INTC_CONTROL 0x0048
+#define INTC_MIR_CLEAR0 0x0088
+#define INTC_MIR_SET0 0x008c
+#define INTC_PENDING_IRQ0 0x0098
+
+/* Number of IRQ state bits in each MIR register */
+#define IRQ_BITS_PER_REG 32
/*
* OMAP2 has a number of different interrupt controllers, each interrupt
@@ -42,36 +48,40 @@ static struct omap_irq_bank {
},
};
+/* INTC bank register get/set */
+
+static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
+{
+ __raw_writel(val, bank->base_reg + reg);
+}
+
+static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
+{
+ return __raw_readl(bank->base_reg + reg);
+}
+
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
static void omap_ack_irq(unsigned int irq)
{
- __raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
+ intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
}
static void omap_mask_irq(unsigned int irq)
{
- int offset = (irq >> 5) << 5;
+ int offset = irq & (~(IRQ_BITS_PER_REG - 1));
- if (irq >= 64) {
- irq %= 64;
- } else if (irq >= 32) {
- irq %= 32;
- }
+ irq &= (IRQ_BITS_PER_REG - 1);
- __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
+ intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
}
static void omap_unmask_irq(unsigned int irq)
{
- int offset = (irq >> 5) << 5;
+ int offset = irq & (~(IRQ_BITS_PER_REG - 1));
- if (irq >= 64) {
- irq %= 64;
- } else if (irq >= 32) {
- irq %= 32;
- }
+ irq &= (IRQ_BITS_PER_REG - 1);
- __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
+ intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset);
}
static void omap_mask_ack_irq(unsigned int irq)
@@ -91,20 +101,20 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
{
unsigned long tmp;
- tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff;
+ tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
"(revision %ld.%ld) with %d interrupts\n",
bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
- tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG);
+ tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
tmp |= 1 << 1; /* soft reset */
- __raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
+ intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
- while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
+ while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
/* Wait for reset to complete */;
/* Enable autoidle */
- __raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG);
+ intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
}
void __init omap_init_irq(void)
@@ -117,7 +127,8 @@ void __init omap_init_irq(void)
struct omap_irq_bank *bank = irq_banks + i;
if (cpu_is_omap24xx())
- bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE);
+ bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;
^ permalink raw reply related [flat|nested] 14+ messages in thread
end of thread, other threads:[~2008-10-09 15:04 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-03 11:56 [PATCH 0/0] Refreshed omap2 patches, v3 Tony Lindgren
2008-10-03 11:56 ` [PATCH 01/07] ARM: OMAP2 Provide function to enable/disable uart clocks Tony Lindgren
2008-10-03 11:56 ` [PATCH 02/07] ARM: OMAP2: Move sleep.S into sleep24xx.S Tony Lindgren
2008-10-03 11:56 ` [PATCH 03/07] ARM: OMAP2: Use omap_globals for CPU detection for multi-omap Tony Lindgren
2008-10-03 11:56 ` [PATCH 04/07] ARM: OMAP2: Add pinmux support for omap34xx Tony Lindgren
2008-10-03 11:56 ` [PATCH 05/07] ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremap Tony Lindgren
2008-10-03 11:56 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree Tony Lindgren
2008-10-03 11:56 ` [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code Tony Lindgren
2008-10-09 14:37 ` Russell King - ARM Linux
2008-10-09 15:04 ` Tony Lindgren
2008-10-08 7:39 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v3 Tony Lindgren
2008-10-09 15:02 ` [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v4 Tony Lindgren
2008-10-03 12:13 ` [PATCH 0/0] Refreshed omap2 patches, v3 Tony Lindgren
2008-10-08 7:42 ` git-pull request for omap2 changes (Re: [PATCH 0/0] Refreshed omap2 patches, v3) Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).