From: Tony Lindgren <tony@atomide.com>
To: Ben Dooks <ben-linux@fluff.org>
Cc: i2c@lm-sensors.org, linux-omap@vger.kernel.org
Subject: git-pull request for i2c-omap changes (Re: [i2c] [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2)
Date: Fri, 17 Oct 2008 09:04:36 -0700 [thread overview]
Message-ID: <20081017160436.GQ15820@atomide.com> (raw)
In-Reply-To: <20080930053533.GB2779@atomide.com>
[-- Attachment #1: Type: text/plain, Size: 1849 bytes --]
* Tony Lindgren <tony@atomide.com> [080929 22:33]:
> * Ben Dooks <ben-linux@fluff.org> [080930 01:23]:
> > On Thu, Sep 25, 2008 at 10:53:46AM +0300, Tony Lindgren wrote:
> > > Hi all,
> > >
> > > Here's a repost of the whole series, the first series had a compile
> > > error starting with one of the patches. Sorry for the extra noise.
> > >
> > > This series contains pending i2c-omap patches from linux-omap tree
> > > for review.
> > >
> > > Looks like we've managed to pile up stuff in the omap tree for this
> > > driver again... Anyways, future patches will be coming straight via
> > > the i2c list.
> > >
> > > The first two patches could be pushed as fixes to current -rc series,
> > > but I'm fine with them going in later too.
> >
> > It is too late in the -rc series, and it will be easier to push the
> > lot in one go.
>
> OK
>
> > > I've left out some clean-up from the last patch so it won't conflict with
> > > omap ioremp changes that are currently in Russell King's devel
> > > branch.
> >
> > If you can provide an url to a git tree to pull, that'd be great,
> > otherwise I'll apply from the series unless anyone else decides
> > there are problems with it.
>
> Thanks for looking, I'll fix the issues you commented on and will
> repost. It may take a few days before I can get back on this again
> though.
Sorry for the delay in fixing these issues. Hopefully there's still
some time to get these in..
The minimal omap34xx support hit mainline yesterday, so if these
still can get integrated, people will be able to work on a bunch of
related drivers against the mainline.
This would enable at least drivers/mfd/twl4030*, and all the twl4030
related drivers. And also USB OTG for MUSB can be worked on. The twl4030
core code should be queued for integration, and MUSB stuff is already
integrated.
Regards,
Tony
[-- Attachment #2: pull --]
[-- Type: text/plain, Size: 1162 bytes --]
The following changes since commit 2e532d68a2b3e2aa6b19731501222069735c741c:
Linus Torvalds (1):
{pci,pnp} quirks.c: don't use deprecated print_fn_descriptor_symbol()
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git i2c-for-ben
Chandra shekhar (1):
i2c-omap: Add support for omap34xx
Jarkko Nikula (1):
i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg
Nishanth Menon (1):
i2c-omap: FIFO handling support and broken hw workaround for i2c-omap
Paul Walmsley (4):
i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr()
i2c-omap: Mark init-only functions as __init
i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds
i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()
Syed Mohammed Khasim (1):
i2c-omap: Add high-speed support to omap-i2c
Tony Lindgren (1):
i2c-omap: Clean-up i2c-omap
arch/arm/mach-omap2/clock24xx.h | 4 +-
drivers/i2c/busses/i2c-omap.c | 335 ++++++++++++++++++++++++++++++---------
2 files changed, 258 insertions(+), 81 deletions(-)
prev parent reply other threads:[~2008-10-17 16:05 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-25 7:53 [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2 Tony Lindgren
2008-09-25 7:53 ` [PATCH 1/8] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Tony Lindgren
2008-09-25 7:53 ` [PATCH 2/8] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() Tony Lindgren
2008-09-25 7:53 ` [PATCH 3/8] i2c-omap: Add high-speed support to omap-i2c Tony Lindgren
2008-09-25 7:53 ` [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap Tony Lindgren
2008-09-25 7:53 ` [PATCH 5/8] i2c-omap: Add support on 34xx Tony Lindgren
2008-09-25 7:53 ` [PATCH 6/8] i2c-omap: Mark init-only functions as __init Tony Lindgren
2008-09-25 7:53 ` [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds Tony Lindgren
2008-09-25 7:53 ` [PATCH 8/8] i2c-omap: Clean-up i2c-omap Tony Lindgren
2008-09-25 11:40 ` [PATCH 8/8] i2c-omap: Clean-up i2c-omap, v3 Tony Lindgren
2008-09-29 22:31 ` [i2c] [PATCH 8/8] i2c-omap: Clean-up i2c-omap Ben Dooks
2008-10-17 15:41 ` Tony Lindgren
2008-09-29 22:29 ` [i2c] [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds Ben Dooks
2008-09-29 23:06 ` David Brownell
2008-09-30 5:35 ` Paul Walmsley
2008-09-30 5:36 ` Paul Walmsley
2008-10-17 15:40 ` Tony Lindgren
2008-09-29 22:30 ` [i2c] [PATCH 6/8] i2c-omap: Mark init-only functions as __init Ben Dooks
2008-10-17 15:39 ` Tony Lindgren
2008-10-17 17:07 ` Tony Lindgren
2008-09-29 22:28 ` [i2c] [PATCH 5/8] i2c-omap: Add support on 34xx Ben Dooks
2008-10-17 15:38 ` Tony Lindgren
2008-09-25 11:39 ` [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap, v3 Tony Lindgren
2008-09-29 22:27 ` [i2c] [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap Ben Dooks
2008-09-29 22:25 ` [i2c] [PATCH 3/8] i2c-omap: Add high-speed support to omap-i2c Ben Dooks
2008-10-17 15:37 ` Tony Lindgren
2008-09-29 22:21 ` [i2c] [PATCH 2/8] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() Ben Dooks
2008-09-29 22:21 ` [i2c] [PATCH 1/8] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Ben Dooks
2008-09-30 11:51 ` Jarkko Nikula
2008-10-17 15:35 ` Tony Lindgren
2008-09-29 22:23 ` [i2c] [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2 Ben Dooks
2008-09-30 5:35 ` Tony Lindgren
2008-10-17 16:04 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081017160436.GQ15820@atomide.com \
--to=tony@atomide.com \
--cc=ben-linux@fluff.org \
--cc=i2c@lm-sensors.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).