From: Tony Lindgren <tony@atomide.com>
To: "Stanley.Miao" <stanley.miao@windriver.com>
Cc: linux-omap@vger.kernel.org, johnpol@2ka.mipt.ru
Subject: Re: [PATCH v2 2/6] OMAP_LDP: Add Ethernet device support to make ldp boot succeess.
Date: Thu, 13 Nov 2008 14:42:44 -0800 [thread overview]
Message-ID: <20081113224243.GP3106@atomide.com> (raw)
In-Reply-To: <1226404258-13027-3-git-send-email-stanley.miao@windriver.com>
* Stanley.Miao <stanley.miao@windriver.com> [081111 03:45]:
> Add Ethernet device support in board-ldp.c to make ldp can boot and mount nfs
> successfully.
Pushing only the board related changes of this patch.
Please send the smc91x changes to netdev list for integration and cc
linux-omap list.
Thanks,
Tony
> Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
> ---
> arch/arm/mach-omap2/board-ldp.c | 53 +++++++++++++++++++++++++++
> arch/arm/plat-omap/include/mach/board-ldp.h | 5 ++-
> drivers/net/smc911x.c | 6 ++-
> drivers/net/smc911x.h | 2 +
> 4 files changed, 63 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
> index c2bb726..e89f271 100644
> --- a/arch/arm/mach-omap2/board-ldp.c
> +++ b/arch/arm/mach-omap2/board-ldp.c
> @@ -44,6 +44,7 @@
> #include "mmc-twl4030.h"
>
>
> +#define SDP3430_SMC91X_CS 3
> #define CONFIG_DISABLE_HFCLK 1
>
> #define ENABLE_VAUX1_DEDICATED 0x03
> @@ -51,6 +52,26 @@
>
> #define TWL4030_MSECURE_GPIO 22
>
> +static struct resource ldp_smc911x_resources[] = {
> + [0] = {
> + .start = OMAP34XX_ETHR_START,
> + .end = OMAP34XX_ETHR_START + SZ_4K,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = 0,
> + .end = 0,
> + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
> + },
> +};
> +
> +static struct platform_device ldp_smc911x_device = {
> + .name = "smc911x",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(ldp_smc911x_resources),
> + .resource = ldp_smc911x_resources,
> +};
> +
> static int ts_gpio;
>
> static int __init msecure_init(void)
> @@ -177,14 +198,46 @@ static struct platform_device ldp_lcd_device = {
> };
>
> static struct platform_device *ldp_devices[] __initdata = {
> + &ldp_smc911x_device,
> &ldp_lcd_device,
> };
>
> +static inline void __init ldp_init_smc911x(void)
> +{
> + int eth_cs;
> + unsigned long cs_mem_base;
> + int eth_gpio = 0;
> +
> + eth_cs = LDP_SMC911X_CS;
> +
> + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
> + printk(KERN_ERR "Failed to request GPMC mem for smc911x\n");
> + return;
> + }
> +
> + ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
> + ldp_smc911x_resources[0].end = cs_mem_base + 0xf;
> + udelay(100);
> +
> + eth_gpio = LDP_SMC911X_GPIO;
> +
> + ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
> +
> + if (omap_request_gpio(eth_gpio) < 0) {
> + printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
> + eth_gpio);
> + return;
> + }
> + omap_set_gpio_direction(eth_gpio, 1);
> +}
> +
> +
> static void __init omap_ldp_init_irq(void)
> {
> omap2_init_common_hw(NULL);
> omap_init_irq();
> omap_gpio_init();
> + ldp_init_smc911x();
> }
>
> static struct omap_uart_config ldp_uart_config __initdata = {
> diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
> index 66e2746..f233996 100644
> --- a/arch/arm/plat-omap/include/mach/board-ldp.h
> +++ b/arch/arm/plat-omap/include/mach/board-ldp.h
> @@ -32,5 +32,8 @@
> extern void twl4030_bci_battery_init(void);
>
> #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
> -
> +#define LDP_SMC911X_CS 1
> +#define LDP_SMC911X_GPIO 152
> +#define DEBUG_BASE 0x08000000
> +#define OMAP34XX_ETHR_START DEBUG_BASE
> #endif /* __ASM_ARCH_OMAP_LDP_H */
> diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
> index f59c777..05e7512 100644
> --- a/drivers/net/smc911x.c
> +++ b/drivers/net/smc911x.c
> @@ -2063,7 +2063,7 @@ static int smc911x_drv_probe(struct platform_device *pdev)
> ret = -ENODEV;
> goto out;
> }
> -
> +#ifndef SMC_MEM_RESERVED
> /*
> * Request the regions.
> */
> @@ -2071,7 +2071,7 @@ static int smc911x_drv_probe(struct platform_device *pdev)
> ret = -EBUSY;
> goto out;
> }
> -
> +#endif
> ndev = alloc_etherdev(sizeof(struct smc911x_local));
> if (!ndev) {
> printk("%s: could not allocate device.\n", CARDNAME);
> @@ -2108,7 +2108,9 @@ static int smc911x_drv_probe(struct platform_device *pdev)
> release_both:
> free_netdev(ndev);
> release_1:
> +#ifndef SMC_MEM_RESERVED
> release_mem_region(res->start, SMC911X_IO_EXTENT);
> +#endif
> out:
> printk("%s: not found (%d).\n", CARDNAME, ret);
> }
> diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
> index d1b3b9b..f688b55 100644
> --- a/drivers/net/smc911x.h
> +++ b/drivers/net/smc911x.h
> @@ -682,6 +682,7 @@ smc_pxa_dma_outsl(struct smc911x_local *lp, u_long physaddr,
> #define CHIP_9116 0x0116
> #define CHIP_9117 0x0117
> #define CHIP_9118 0x0118
> +#define CHIP_9211 0x9211
> #define CHIP_9215 0x115A
> #define CHIP_9217 0x117A
> #define CHIP_9218 0x118A
> @@ -696,6 +697,7 @@ static const struct chip_id chip_ids[] = {
> { CHIP_9116, "LAN9116" },
> { CHIP_9117, "LAN9117" },
> { CHIP_9118, "LAN9118" },
> + { CHIP_9211, "LAN9211" },
> { CHIP_9215, "LAN9215" },
> { CHIP_9217, "LAN9217" },
> { CHIP_9218, "LAN9218" },
> --
> 1.5.6.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-11-13 22:42 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-11 11:50 [PATCH v2 0/6] OMAP: Make OMAP LDP boot succussfuly Stanley.Miao
2008-11-11 11:50 ` [PATCH v2 1/6] OMAP: Update the search() interface of omap_hdq Stanley.Miao
2008-11-11 11:50 ` [PATCH v2 2/6] OMAP_LDP: Add Ethernet device support to make ldp boot succeess Stanley.Miao
2008-11-11 11:50 ` [PATCH v2 3/6] OMAP_LDP: Add network related configs in defconfig Stanley.Miao
2008-11-11 11:50 ` [PATCH v2 4/6] OMAP: Fix twl4030 keypad bug Stanley.Miao
2008-11-11 11:50 ` [PATCH v2 5/6] OMAP_LDP: Add keypad support on ZOOM SDK Stanley.Miao
2008-11-11 11:50 ` [PATCH v2 6/6] OMAP_LDP: Add keypad related configs into defconfig Stanley.Miao
2008-11-13 22:42 ` Tony Lindgren [this message]
2008-11-13 22:53 ` [PATCH v2 2/6] OMAP_LDP: Add Ethernet device support to make ldp boot succeess Tony Lindgren
2008-11-11 14:57 ` [PATCH v2 0/6] OMAP: Make OMAP LDP boot succussfuly Evgeniy Polyakov
2008-11-13 22:40 ` Tony Lindgren
2008-11-14 11:28 ` Evgeniy Polyakov
2008-11-19 18:13 ` Tony Lindgren
2008-11-19 18:51 ` Evgeniy Polyakov
2008-11-19 19:14 ` Tony Lindgren
2008-11-19 19:31 ` Evgeniy Polyakov
2008-11-19 20:01 ` Tony Lindgren
2008-11-20 8:31 ` Evgeniy Polyakov
2008-11-20 17:29 ` Tony Lindgren
2008-11-12 8:58 ` stanley.miao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081113224243.GP3106@atomide.com \
--to=tony@atomide.com \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-omap@vger.kernel.org \
--cc=stanley.miao@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox