From: David Brownell <david-b@pacbell.net>
To: linux-omap@vger.kernel.org
Subject: [patch 2.6.28-rc6-omap-git] twl4030 usb regulator support tweaks
Date: Mon, 1 Dec 2008 13:24:21 -0800 [thread overview]
Message-ID: <200812011324.21516.david-b@pacbell.net> (raw)
From: David Brownell <dbrownell@users.sourceforge.net>
This contains two bugfixes to the initial twl4030 regulator
support patch related to USB:
(a) always overwrite the old list of consumers ... else
the regulators all share the same "usb1v5" name;
(b) don't set up the "usbcp" regulator, which turns out
to be managed through separate controls, usually ULPI
directly from the OTG controller.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
NOTE: the version of this patch going to mainline doesn't
include the twl4030-regulator.c fragment, since that driver
has not yet gone to mainline.
drivers/mfd/twl4030-core.c | 11 +----------
drivers/regulator/twl4030-regulator.c | 2 +-
include/linux/i2c/twl4030.h | 1 -
3 files changed, 2 insertions(+), 12 deletions(-)
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -441,7 +441,7 @@ add_regulator_linked(int num, struct reg
if (!pdata)
return NULL;
- if (consumers && !pdata->consumer_supplies) {
+ if (consumers) {
pdata->consumer_supplies = consumers;
pdata->num_consumer_supplies = num_consumers;
}
@@ -564,9 +564,6 @@ add_children(struct twl4030_platform_dat
static struct regulator_consumer_supply usb3v1 = {
.supply = "usb3v1",
};
- static struct regulator_consumer_supply usbcp = {
- .supply = "usbcp",
- };
/* this is a template that gets copied */
struct regulator_init_data usb_fixed = {
@@ -581,7 +578,6 @@ add_children(struct twl4030_platform_dat
usb1v5.dev = usb_transceiver;
usb1v8.dev = usb_transceiver;
usb3v1.dev = usb_transceiver;
- usbcp.dev = usb_transceiver;
child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed,
&usb1v5, 1);
@@ -597,11 +593,6 @@ add_children(struct twl4030_platform_dat
&usb3v1, 1);
if (IS_ERR(child))
return PTR_ERR(child);
-
- child = add_regulator_linked(TWL4030_REG_VUSBCP, &usb_fixed,
- &usbcp, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
}
/* maybe add LDOs that are omitted on cost-reduced parts */
--- a/drivers/regulator/twl4030-regulator.c
+++ b/drivers/regulator/twl4030-regulator.c
@@ -391,7 +391,7 @@ static struct twlreg_info twl4030_regs[]
TWL_FIXED_LDO(VUSB1V5, 0x71, 1500, 17),
TWL_FIXED_LDO(VUSB1V8, 0x74, 1800, 18),
TWL_FIXED_LDO(VUSB3V1, 0x77, 3100, 19),
- TWL_FIXED_LDO(VUSBCP, 0x7a, 4800, 21),
+ /* VUSBCP is managed *only* by the USB subchip */
};
static int twl4030reg_probe(struct platform_device *pdev)
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -417,6 +417,5 @@ int twl4030_sih_setup(int module);
#define TWL4030_REG_VUSB1V5 17
#define TWL4030_REG_VUSB1V8 18
#define TWL4030_REG_VUSB3V1 19
-#define TWL4030_REG_VUSBCP 20
#endif /* End of __TWL4030_H */
next reply other threads:[~2008-12-01 21:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-01 21:24 David Brownell [this message]
2008-12-15 19:31 ` [patch 2.6.28-rc6-omap-git] twl4030 usb regulator support tweaks Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812011324.21516.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox