* Tony Lindgren <tony@atomide.com> [081205 16:34]:
> * Steve Sakoman <sakoman@gmail.com> [081205 16:31]:
> > I attempted an Overo build this afternoon with
> > fb3d15c023ff08c879155db630895f38526b95f6.
> > 
> > I set bootargs for rootfs on mmc.  The boot progresses normally and
> > then hangs waiting for the rootfs to mount.
> > 
> > Where I previously got:
> > 
> >   Waiting for root device /dev/mmcblk0p2...
> >   mmc0: host does not support reading read-only switch. assuming write-enable.
> >   mmc0: new SD card at address ee21
> >   mmcblk0: mmc0:ee21 SU02G 1.89 GiB
> >    mmcblk0: p1 p2
> > 
> > I now get:
> > 
> >   Waiting for root device /dev/mmcblk0p2...
> > 
> > Has anyone else seen mmc issues with rc7?
> 
> I think I did it again while cleaning up.. Can you try this patch?
> The name was conflicting with the other MMC omap driver.

Actually now it breaks for earlier omaps, it  needs to be like this
patch instead.

> Tony