Re: mmc broken?

[Tony Lindgren <tony@atomide.com>]

* Steve Sakoman <sakoman@gmail.com> [081205 17:01]:
> On Fri, Dec 5, 2008 at 4:49 PM, Tony Lindgren <tony@atomide.com> wrote:
> > * Tony Lindgren <tony@atomide.com> [081205 16:34]:
> >> * Steve Sakoman <sakoman@gmail.com> [081205 16:31]:
> >> > I attempted an Overo build this afternoon with
> >> > fb3d15c023ff08c879155db630895f38526b95f6.
> >> >
> >> > I set bootargs for rootfs on mmc.  The boot progresses normally and
> >> > then hangs waiting for the rootfs to mount.
> >> >
> >> > Where I previously got:
> >> >
> >> >   Waiting for root device /dev/mmcblk0p2...
> >> >   mmc0: host does not support reading read-only switch. assuming write-enable.
> >> >   mmc0: new SD card at address ee21
> >> >   mmcblk0: mmc0:ee21 SU02G 1.89 GiB
> >> >    mmcblk0: p1 p2
> >> >
> >> > I now get:
> >> >
> >> >   Waiting for root device /dev/mmcblk0p2...
> >> >
> >> > Has anyone else seen mmc issues with rc7?
> >>
> >> I think I did it again while cleaning up.. Can you try this patch?
> >> The name was conflicting with the other MMC omap driver.
> >
> > Actually now it breaks for earlier omaps, it  needs to be like this
> > patch instead.
> 
> Heh, isn't that how it always goes!  Two steps forward, one step back :-)

:)

> I tested your first patch and it did indeed solve the issue.  Looks
> like your second patch will also work.  I'll verify this later this
> evening.

Pushed it already, seems to work.

Tony