From: Tony Lindgren <tony@atomide.com>
To: arunks@mistralsolutions.com
Cc: linux-omap@vger.kernel.org, dbrownell@users.sourceforge.net,
dirk.behme@de.bosch.com
Subject: Re: [PATCH] Removes unused platform device for osk5912
Date: Mon, 8 Dec 2008 11:12:51 -0800 [thread overview]
Message-ID: <20081208191251.GS7388@atomide.com> (raw)
In-Reply-To: <1228456391-7292-1-git-send-email-arunks@mistralsolutions.com>
* arunks@mistralsolutions.com <arunks@mistralsolutions.com> [081204 21:53]:
> From: Arun KS <arunks@mistralsolutions.com>
>
> This patch removes platform device used my ALSA driver, which
> is now replaced with ASoC driver.
Thanks, I'll apply this to linux-omap tree. Will also expand it to
delete similar code from other board files for the mainline queue.
Some of the includes can disappear with this patch, BTW.
Tony
> Signed-off-by: Arun KS <arunks@mistralsolutions.com>
> ---
> arch/arm/mach-omap1/board-osk.c | 37 -------------------------------------
> 1 files changed, 0 insertions(+), 37 deletions(-)
>
> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
> index 41e40d6..d2dfff5 100644
> --- a/arch/arm/mach-omap1/board-osk.c
> +++ b/arch/arm/mach-omap1/board-osk.c
> @@ -141,47 +141,10 @@ static struct platform_device osk5912_cf_device = {
> .resource = osk5912_cf_resources,
> };
>
> -#define DEFAULT_BITPERSAMPLE 16
> -
> -static struct omap_mcbsp_reg_cfg mcbsp_regs = {
> - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
> - .spcr1 = RINTM(3) | RRST,
> - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
> - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
> - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
> - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
> - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
> - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
> - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
> - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
> - /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
> - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
> -};
> -
> -static struct omap_alsa_codec_config alsa_config = {
> - .name = "OSK AIC23",
> - .mcbsp_regs_alsa = &mcbsp_regs,
> - .codec_configure_dev = NULL, /* aic23_configure, */
> - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
> - .codec_clock_setup = NULL, /* aic23_clock_setup, */
> - .codec_clock_on = NULL, /* aic23_clock_on, */
> - .codec_clock_off = NULL, /* aic23_clock_off, */
> - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
> -};
> -
> -static struct platform_device osk5912_mcbsp1_device = {
> - .name = "omap_alsa_mcbsp",
> - .id = 1,
> - .dev = {
> - .platform_data = &alsa_config,
> - },
> -};
> -
> static struct platform_device *osk5912_devices[] __initdata = {
> &osk5912_flash_device,
> &osk5912_smc91x_device,
> &osk5912_cf_device,
> - &osk5912_mcbsp1_device,
> };
>
> static struct gpio_led tps_leds[] = {
> --
> 1.5.6.3
>
next prev parent reply other threads:[~2008-12-08 19:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-05 5:53 [PATCH] Removes unused platform device for osk5912 arunks
2008-12-08 19:12 ` Tony Lindgren [this message]
2008-12-08 19:35 ` David Brownell
2008-12-08 20:03 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081208191251.GS7388@atomide.com \
--to=tony@atomide.com \
--cc=arunks@mistralsolutions.com \
--cc=dbrownell@users.sourceforge.net \
--cc=dirk.behme@de.bosch.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox