From: Jean Pihet <jpihet@mvista.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH] OMAP2 OneNAND GPIO fix
Date: Tue, 16 Dec 2008 09:19:24 +0100 [thread overview]
Message-ID: <200812160919.24771.jpihet@mvista.com> (raw)
In-Reply-To: <20081215234058.GC19551@atomide.com>
On Tuesday 16 December 2008 00:40:59 Tony Lindgren wrote:
> * Jean Pihet <jpihet@mvista.com> [081211 09:02]:
> > Hi,
> >
> > Here is a patch to have the OMAP2 OneNAND driver compile on the latest
> > tree. I do not know if this has been addressed already, here is a patch.
>
> Looks like I already applied similar fixes. These are queued up for
> mainline too BTW.
Ok. My patch also changes the request and free omap calls to the standard
version. I can generate a new patch if needed.
Regards,
Jean.
>
> Regards,
>
> Tony
>
> > Regards,
> > Jean
> >
> >
> >
> > From f95826f916cde9c0d0da79e006f090bc69112a1e Mon Sep 17 00:00:00 2001
> > From: Jean Pihet <jpihet@mvista.com>
> > Date: Thu, 11 Dec 2008 17:48:31 +0100
> > Subject: [PATCH] ARM: OMAP: use GPIO standard in OneNAND driver
> >
> > This patch replaces some legacy OMAP GPIO calls with the standard
> > calls that work on most platforms.
> >
> > Tested on OMAP3 EVM board.
> >
> > Signed-off-by: Jean Pihet <jpihet@mvista.com>
> > ---
> > drivers/mtd/onenand/omap2.c | 13 +++++++------
> > 1 files changed, 7 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
> > index 762623f..f223303 100644
> > --- a/drivers/mtd/onenand/omap2.c
> > +++ b/drivers/mtd/onenand/omap2.c
> > @@ -34,11 +34,11 @@
> > #include <linux/delay.h>
> > #include <linux/dma-mapping.h>
> > #include <linux/io.h>
> > +#include <linux/gpio.h>
> >
> > #include <asm/mach/flash.h>
> > #include <mach/gpmc.h>
> > #include <mach/onenand.h>
> > -#include <mach/gpio.h>
> > #include <mach/pm.h>
> >
> > #include <mach/dma.h>
> > @@ -149,7 +149,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd,
> > int state)
> >
> > INIT_COMPLETION(c->irq_done);
> > if (c->gpio_irq) {
> > - result = omap_get_gpio_datain(c->gpio_irq);
> > + result = gpio_get_value(c->gpio_irq);
> > if (result == -1) {
> > ctrl = read_reg(c,
> > ONENAND_REG_CTRL_STATUS); intr = read_reg(c, ONENAND_REG_INTERRUPT); @@
> > -629,12 +629,13 @@ static int __devinit omap2_onenand_probe(struct
> > platform_device *pdev)
> > }
> >
> > if (c->gpio_irq) {
> > - if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
> > + r = gpio_request(c->gpio_irq, "OneNAND Irq");
> > + if (r < 0) {
> > dev_err(&pdev->dev, "Failed to request GPIO%d
> > for " "OneNAND\n", c->gpio_irq);
> > goto err_iounmap;
> > }
> > - omap_set_gpio_direction(c->gpio_irq, 1);
> > + gpio_direction_input(c->gpio_irq);
> >
> > if ((r = request_irq(gpio_to_irq(c->gpio_irq),
> > omap2_onenand_interrupt,
> > IRQF_TRIGGER_RISING, @@ -726,7 +727,7 @@ err_release_dma:
> > free_irq(gpio_to_irq(c->gpio_irq), c);
> > err_release_gpio:
> > if (c->gpio_irq)
> > - omap_free_gpio(c->gpio_irq);
> > + gpio_free(c->gpio_irq);
> > err_iounmap:
> > iounmap(c->onenand.base);
> > err_release_mem_region:
> > @@ -761,7 +762,7 @@ static int __devexit omap2_onenand_remove(struct
> > platform_device *pdev)
> > platform_set_drvdata(pdev, NULL);
> > if (c->gpio_irq) {
> > free_irq(gpio_to_irq(c->gpio_irq), c);
> > - omap_free_gpio(c->gpio_irq);
> > + gpio_free(c->gpio_irq);
> > }
> > iounmap(c->onenand.base);
> > release_mem_region(c->phys_base, ONENAND_IO_SIZE);
> > --
> > 1.5.4.4.21.gc4a6c
> >
> > From f95826f916cde9c0d0da79e006f090bc69112a1e Mon Sep 17 00:00:00 2001
> > From: Jean Pihet <jpihet@mvista.com>
> > Date: Thu, 11 Dec 2008 17:48:31 +0100
> > Subject: [PATCH] ARM: OMAP: use GPIO standard in OneNAND driver
> >
> > This patch replaces some legacy OMAP GPIO calls with the standard
> > calls that work on most platforms.
> >
> > Tested on OMAP3 EVM board.
> >
> > Signed-off-by: Jean Pihet <jpihet@mvista.com>
> > ---
> > drivers/mtd/onenand/omap2.c | 13 +++++++------
> > 1 files changed, 7 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
> > index 762623f..f223303 100644
> > --- a/drivers/mtd/onenand/omap2.c
> > +++ b/drivers/mtd/onenand/omap2.c
> > @@ -34,11 +34,11 @@
> > #include <linux/delay.h>
> > #include <linux/dma-mapping.h>
> > #include <linux/io.h>
> > +#include <linux/gpio.h>
> >
> > #include <asm/mach/flash.h>
> > #include <mach/gpmc.h>
> > #include <mach/onenand.h>
> > -#include <mach/gpio.h>
> > #include <mach/pm.h>
> >
> > #include <mach/dma.h>
> > @@ -149,7 +149,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd,
> > int state)
> >
> > INIT_COMPLETION(c->irq_done);
> > if (c->gpio_irq) {
> > - result = omap_get_gpio_datain(c->gpio_irq);
> > + result = gpio_get_value(c->gpio_irq);
> > if (result == -1) {
> > ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
> > intr = read_reg(c, ONENAND_REG_INTERRUPT);
> > @@ -629,12 +629,13 @@ static int __devinit omap2_onenand_probe(struct
> > platform_device *pdev) }
> >
> > if (c->gpio_irq) {
> > - if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
> > + r = gpio_request(c->gpio_irq, "OneNAND Irq");
> > + if (r < 0) {
> > dev_err(&pdev->dev, "Failed to request GPIO%d for "
> > "OneNAND\n", c->gpio_irq);
> > goto err_iounmap;
> > }
> > - omap_set_gpio_direction(c->gpio_irq, 1);
> > + gpio_direction_input(c->gpio_irq);
> >
> > if ((r = request_irq(gpio_to_irq(c->gpio_irq),
> > omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
> > @@ -726,7 +727,7 @@ err_release_dma:
> > free_irq(gpio_to_irq(c->gpio_irq), c);
> > err_release_gpio:
> > if (c->gpio_irq)
> > - omap_free_gpio(c->gpio_irq);
> > + gpio_free(c->gpio_irq);
> > err_iounmap:
> > iounmap(c->onenand.base);
> > err_release_mem_region:
> > @@ -761,7 +762,7 @@ static int __devexit omap2_onenand_remove(struct
> > platform_device *pdev) platform_set_drvdata(pdev, NULL);
> > if (c->gpio_irq) {
> > free_irq(gpio_to_irq(c->gpio_irq), c);
> > - omap_free_gpio(c->gpio_irq);
> > + gpio_free(c->gpio_irq);
> > }
> > iounmap(c->onenand.base);
> > release_mem_region(c->phys_base, ONENAND_IO_SIZE);
> > --
> > 1.5.4.4.21.gc4a6c
next prev parent reply other threads:[~2008-12-16 8:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-11 16:59 [PATCH] OMAP2 OneNAND GPIO fix Jean Pihet
2008-12-15 23:40 ` Tony Lindgren
2008-12-16 8:19 ` Jean Pihet [this message]
2008-12-16 8:39 ` Jarkko Nikula
2008-12-16 16:37 ` Tony Lindgren
2008-12-16 18:28 ` Jean Pihet
2009-01-08 12:10 ` Tony Lindgren
2009-01-08 12:56 ` Jean Pihet
2009-01-08 13:12 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812160919.24771.jpihet@mvista.com \
--to=jpihet@mvista.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox