From: Paul Walmsley <paul@pwsan.com>
To: linux-omap@vger.kernel.org
Cc: Paul Walmsley <paul@pwsan.com>
Subject: [PATCH v2 13/23] OMAP2xxx clock: consolidate DELAYED_APP clock commits; fix barrier
Date: Sun, 04 Jan 2009 19:34:55 -0700 [thread overview]
Message-ID: <20090105023454.12661.7181.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090105022953.12661.57701.stgit@localhost.localdomain>
Consolidate the commit code for DELAYED_APP clocks into a subroutine,
_omap2xxx_clk_commit(). Also convert the MPU barrier wmb() into an
OCP barrier, since with an MPU barrier, we have no guarantee that the
write actually reached the endpoint device.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/clock.c | 34 ++++++++++++++++++++++++----------
1 files changed, 24 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d0caeef..78e14bf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -120,6 +120,28 @@ static void _omap2_clk_write_reg(u32 v, u16 reg_offset, struct clk *clk)
cm_write_mod_reg(v, clk->prcm_mod, reg_offset);
}
+/**
+ * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
+ * @clk: struct clk *
+ *
+ * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
+ * don't take effect until the VALID_CONFIG bit is written, write the
+ * VALID_CONFIG bit and wait for the write to complete. No return value.
+ */
+static void _omap2xxx_clk_commit(struct clk *clk)
+{
+ if (!cpu_is_omap24xx())
+ return;
+
+ if (!(clk->flags & DELAYED_APP))
+ return;
+
+ prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
+ OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ /* OCP barrier */
+ prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+}
+
/*
* _dpll_test_fint - test whether an Fint value is valid for the DPLL
* @clk: DPLL struct clk to test
@@ -757,11 +779,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
clk->rate = clk->parent->rate / new_div;
- if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
- prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
- OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
- wmb();
- }
+ _omap2xxx_clk_commit(clk);
return 0;
}
@@ -835,11 +853,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
_omap2_clk_write_reg(v, clk->clksel_reg, clk);
wmb();
- if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
- prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
- OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
- wmb();
- }
+ _omap2xxx_clk_commit(clk);
if (clk->usecount > 0)
_omap2_clk_enable(clk);
next prev parent reply other threads:[~2009-01-05 3:22 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-05 2:34 [PATCH v2 00/23] OMAP clock: bug fixes, cleanup, optimization Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 01/23] OMAP2/3 clock: use standard set_rate fn in omap2_clk_arch_init() Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 02/23] OMAP clock: move rate recalc, propagation code up to plat-omap/clock.c Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 04/23] OMAP clock: support "dry run" rate and parent changes Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 03/23] OMAP2/3 clock: drop recalc function pointers from fixed rate clocks Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 05/23] OMAP clock: track child clocks Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 06/23] OMAP clock: drop the RATE_PROPAGATES flag Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 07/23] OMAP clock: drop RATE_FIXED Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 09/23] OMAP2 clock: drop CONFIG_PARTICIPANT clock flag Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 08/23] OMAP clock: remove VIRTUAL_CLOCK Paul Walmsley
2009-01-06 2:03 ` Kevin Hilman
2009-01-06 2:34 ` Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 10/23] OMAP2/3 clock: remove clk->owner Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 12/23] OMAP2/3 clock: don't use a barrier after clk_disable() Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 11/23] OMAP clock: rearrange clock.h structure order Paul Walmsley
2009-01-05 2:34 ` Paul Walmsley [this message]
2009-01-05 2:34 ` [PATCH v2 14/23] OMAP2/3 clock: convert remaining MPU barriers into OCP barriers Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 16/23] OMAP clock: add OMAP chip family-specific clk_register() option Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 15/23] OMAP clock: drop clk_get_usecount() Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 17/23] OMAP2/3 clock: every clock must have a clkdm Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 18/23] OMAP2/3 clock: omap2_clk_enable(): refactor usecount check Paul Walmsley
2009-01-05 2:34 ` [PATCH v2 19/23] OMAP2/3 clock: omap2_clk_enable(): fix bugs in clockdomain handling Paul Walmsley
2009-01-05 2:35 ` [PATCH v2 20/23] OMAP2/3 clock: omap2_clk_enable(): fix usecount decrement bug Paul Walmsley
[not found] ` <2ee9e08d0901060342q36a5ebd2i448d87ba55bb034d@mail.gmail.com>
2009-01-06 11:43 ` Fwd: " Anuj Aggarwal
2009-01-05 2:35 ` [PATCH v2 21/23] OMAP2/3 clock: omap2_clk_enable(): fix logic Paul Walmsley
2009-01-05 2:35 ` [PATCH v2 22/23] OMAP2/3 clock: don't tinker with hardirqs when they are supposed to be disabled Paul Walmsley
2009-01-05 2:35 ` [PATCH v2 23/23] OMAP3 SmartReflex: get rid of custom clocks Paul Walmsley
2009-01-07 15:46 ` [PATCH v2 00/23] OMAP clock: bug fixes, cleanup, optimization Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090105023454.12661.7181.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox