From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 1/2] Add support for GPIO LEDs on pandora Date: Fri, 9 Jan 2009 13:53:04 +0200 Message-ID: <20090109115302.GI2536@atomide.com> References: <1227780163-5879-1-git-send-email-notasas@gmail.com> <20090108152818.GE25876@sirena.org.uk> <6ed0b2680901080829p740cf017y2f5dd0d59f025743@mail.gmail.com> <200901081204.10441.david-b@pacbell.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-01-bos.mailhop.org ([63.208.196.178]:60788 "EHLO mho-01-bos.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752751AbZAILxM (ORCPT ); Fri, 9 Jan 2009 06:53:12 -0500 Content-Disposition: inline In-Reply-To: <200901081204.10441.david-b@pacbell.net> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: David Brownell Cc: Grazvydas Ignotas , Mark Brown , Koen Kooi , "linux-omap@vger.kernel.org List" , Richard Purdie * David Brownell [090108 22:04]: > On Thursday 08 January 2009, Grazvydas Ignotas wrote: > > Well this was only temporary solution until we have proper code to > > control BL using TWL4030's PWM capability. > > I have code to support the PWM0/PWM1 signals that needs testing, > so that's not far away. The LEDA/LEDB PWMs can control brightness > of those two signals, as part of that same patch. OK, let's wait a bit then so these patches can be done directly against the mainline tree. So not pushing Grazvydas' patch to l-o at this point. Regards, Tony